Covered fabrics - Import export

Do you need to protect sensitive equipment from extreme climate conditions? Or do you need to store goods without the risk of them getting detected? Our fast opening domes are designed to offer instant protection and shelter. Our domes are operated by an electric gearbox, and fitted with a manual safety system. This enables them to open extremely fast, in less than a minute. They can open in either single or dual mode (both ways). They are composed of a galvanized steel frame and a heavy-duty PVC-coated fabric cover. Our protective domes are available in standards diameters of 9, 11, 13, 16 and 20 meters. We can adapt their design to match local wind and snow load requirements, so your goods are always well protected.

Suction and Pressure hose for liquid media, also with solids content. Resistant to faeces and light alkaline solutions. Suitable for use on suction vehicles and fixed-location pumping stations. Temperature resistant from -40°C to +100°C. Construction: Faeces-resistant tube Optional: Oil and petrol-resistant tube Tension and pressure-resistant fabric inlays Concealed steel spiral Abrasion-resistant cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

For use on disposal vehicles. Highly flexible, stable cross-section and can be used universally as a reel hose or compartment hose. Low elongation and good vibration damping. Temperature resistant from –40°C to +100°C. Construction: Abrasion-resistant, antistatic, oil-resistant tube Tension and pressure-resistant fabric inlays Concealed steel spiral UV, ozone and weather-resistant cover Interior and exterior smooth, fabric patterned Optional: Exterior corrugated or ribbed Supplied by the roll or cut to length with fittings and/or widened hose endings. Other versions and dimensions on request.

For tar or hot bitumen at temperatures from –25°C to +200°C. With additional spiral for maximum safety and highest possible flexibility. Construction: Special NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Concealed steel spiral abrasion-resistant CR-cover interior and exterior smooth, fabric patterned Please follow the safety regulations for bitumen hoses! Tar spraying hose Bitumen hose Sold by the roll or cut to length with cuffed ends and/or widened hose endings. Also available as heatable version or per DIN EN 13482. Other versions and dimensions on request.

Resistant against a large number of acids and alkaline solutions, aldehydes, amines, esters, ketones and other chemicals. Version with good bending characteristics. Conforms to DIN EN 12155. For information on temperature and media resistances please see our Simon resistances chart. Construction: Black, electrically conductive EPDM tube Tension and pressure-resistant fabric inlays Embedded copper wire Optional: Concealed steel spiral Weather-resistant, electrically conductive, abrasion-resistant CR cover Interior and exterior smooth, fabric patterned or corrugated *) Spiral hose version **) Applies only to operation at minimum 1 bar, otherwise risk of hose kinking Other versions and dimensions on request.

To handle abrasive media at normal bending radiuses and high vacuum. The standard version for a large number of very different applications in hydraulic or pneumatic transport. Temperature-resistant from –35°C to +90°C. Construction: Abrasion-resistant, antistatic tube Optional: Embedded copper wire Tension and pressure-resistant fabric inlays Concealed steel spiral UV, ozone and weather-resistant cover Interior and exterior smooth, fabric patterned Sold by the roll or in fixed lengths with cuffed ends and/or widened hose endings. Version without spiral also available. Other versions and dimensions on request.

For a large number of solvents and mineral oil products, aldehydes, ketones, esters and alcohols. Conforms to DIN EN 12115. For information on temperature and media resistances please see our Simon resistances chart. Construction: Black, electrically conductive NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Optional: Concealed steel spiral Weather-resistant, electrically conductive, abrasion-resistant CR cover Interior and exterior smooth, fabric patterned or corrugated *) Spiral hose version **) Applies only to operations at minimum 1 bar, otherwise risk of hose kinking Other versions and dimensions on request.

Outstanding chemical resistance through use of inliners of modern materials such as UHMPE or PE. Conforms to DIN EN 12115. For information on temperature and media resistances please see our Simon resistances chart. Construction: UHMPE or PE tube Tension and pressure-resistant fabric inlays Embedded copper wire Optional: Concealed steel spiral Weather-resistant, electrically conductive, abrasion-resistant CR cover Interior and exterior smooth, fabric patterned or corrugated *) Spiral hose version **) Applies only to operations at minimum 1 bar, otherwise risk of hose kinking Other versions and dimensions on request.

For canalization work, or for tunnel, mining and spring construction. Pressures up to 60 bar and inflatable > 2 x external diameter. Wall thicknesses on request. Construction: Black, especially elastic tube Optional: tension and pressure-resistant special inlays Abrasion-resistant, black cover Interior and exterior smooth, fabric patterned Sold by the roll or in fixed lengths. Inflatable hoses are manufactured to customer specifications. Please coordinate the operating conditions with us when enquiring. Other versions and dimensions on request.

For chemicals and acids in high concentrations and at high operating temperatures to max. 220° C. Version with good bending properties. Conforms to DIN EN 12115. For information on temperature and media resistances please see our Simon resistances chart. Construction: Black, electrically conductive FKM tube Tension and pressure-resistant fabric inlays Embedded copper wire Optional: Concealed steel spiral Weather-resistant, electrically conductive, abrasion-resistant CR cover Interior and exterior smooth, fabric patterned or corrugated *) Spiral hose version **) Applies only to operation at minimum 1 bar, otherwise risk of hose kinking Other versions and dimensions on request.

For a large number of concentrated acids, alkaline solutions, alcohols, saline solutions. Kink-resistant version with good bending properties. Conforms to DIN EN 12155. For information on temperature and media resistances please see our Simon resistances chart. Construction: Black, electrically conductive CSM tube Tension and pressure-resistant fabric inlays Embedded copper wire Optional: Concealed steel spiral Weather-resistant, electrically conductive, abrasion-resistant CR cover Interior and exterior smooth, fabric patterned or corrugated *) Spiral hose version **) Applies only to operation at minimum 1 bar, otherwise risk of hose kinking Other versions and dimensions on request.

Special hose for use in steelworks, foundries and other applications with high ambient temperatures. With optional steel spiral very flexible and stable cross-section. Construction: Light or dark-coloured special tube Special fabric inlays Heatproof glass-fibre surround (to max. 500°C) or Heatproof silicate surround (to max. 1200°C) Optional: Concealed steel spiral Optional: Flame-resistant cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length. Other versions and dimensions on request.

Industrial hose for high pressure loads in the liquid and gaseous media fields. Elastomer used based on application or agreement with customer. Fittings vulcanized on at both ends in DIN, ANSI (ASA) or special bore. Temperature resistant from –40°C to +160°C depending on application. Construction: Special quality tube Tension and pressure-resistant special fabric inlays UV, ozone and weather-resistant cover Interior and exterior smooth, fabric patterned Cut to length with flanges or fittings vulcanized on at both ends. Other versions and dimensions on request.

For production in the steel, foundry and glass industries. Temperature resistant from -30 ° C to + 120 ° C. Highly flexible, hot water resistant version. Construction: Abrasion-resistant tube Tension and pressure-resistant fabric inlays Abrasion-resistant, self-extinguishing cover Interior and exterior smooth, fabric patterned optional with heat protection levy of fiberglass (up to + 240 °C) or silicate (up to + 800 °C) Dielectric strength> 6 KV electrically non-conducting R> 109 Ohm Supplied by the roll or cut to length. Also available as spiral hose. Other versions and dimensions on request.