Connecting elements - Import export

Turned connecting elements, reducers, nipples, sleeves, grommets, plugs, plugs made of steel, aluminium, brass, stainless steel Blank, anodised, nickel-plated, chrome-plated, galvanized.

Preformed connecting element to handle gasses, liquids with solid content, or highly abrasive solids in the suction and pressure field. Outstanding as a substitute for steel arches or steel funnels with longer service lives. Temperature resistant from –40°C to +260°C depending on the application. Construction: Special quality tube depending on the medium Tension and pressure-resistant fabric inlays UV, ozone and weather-resistant cover Interior and exterior smooth, fabric patterned optional: embedded steel rings or steel spiral optional: heat protection cover optional: antistatic version optional: wall reinforcement at bends In fixed lengths. The tooling to produce connecting elements is produced in our tooling shop according to customer drawings. Other versions and dimensions on request.

Nipples, sleeves, reducers, connecting elements, distributors

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane via aluminium connection elements. For roof pitches of up to 5°.

Pneumatic special cylinder in tandem design with two separately controllable chambers and different strokes. Piston rods with anti-twist protection. Complete with connection elements for free suspension according to customer specifications.

For the general mechanical engineering industry we produce hoses and technical hose products in dimensions from 15 to 1600 mm, in variable lengths and for suction or pressure applications. To handle solid, liquid and gaseous media at temperatures from -40°C to +260°C. Below you will see a selection of possible connections, also customised with a wide range of couplings: INDUSTRIAL HOSE As a connecting hose or coupling in pipelines. SPIRAL HOSE Flexible connection for pipelines for suction and pressure applications. CORRUGATED SPIRAL HOSE Highly flexible connecting element in pressure and vacuum applications, in all peripheral feed and drain lines. EXPANSION JOINT Flexible compensator with high vertical and axial tension and pressure-resistance in all areas. HOSE ELBOW Stable-shape connecting element, either for suction and/ or pressure in any geometry. CONNECTIONS We offer customary fittings for our hoses, for bonding-in or vulcanised on. Please see “SIMON – Hose...

Connection element to drain waste water from bridge structures. Highly flexible, compressible version with and without widened endings. Operation as a rule at zero-pressure. Temperature resistant from –35°C to +100°C. Construction: Tube in black, faeces-resistant quality Fabric inlays Concealed steel spiral Abrasion-resistant, weather-resistant cover Interior and exterior corrugated *) Coupling wall In fixed lengths with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

We produce hoses and technical hose products for many well-known engine and vehicle manufacturers in dimensions from 10 to 250 mm at any length and various working pressures. COUPLING Pressure-resistant hose elements as a straight connector or de-coupling element in pipelines for pressures up to 20 bar. SPIRAL HOSE Suction and pressure-resistant versions from -0.9 bar to +20 bar, with or without cuffed ends. Can also be laid in narrow radiuses. CHARGE AIR HOSE As an industrial hose, hose elbow or corrugated spiral hose for suction and pressure lines. As bellows with external metal rings in the pressure area. HOSE ELBOWS Stable shape connecting elements, either for suction and/or pressure in any geometry. Other versions and dimensions on request.

Pneumatic cylinders according to the norm, standard or special design, completely configured ready for installation and pre-assembled with add-on parts, bearing elements, compressed air connections, position sensors or control valves according to customer specifications.

BO-QA Clamping bushings Pulleys can be fastened to cylindrical shafts or journals safely, flexibly and, above all, economically with BOQA clamping bushings. Shaft-to-hub connections with BOQA fastening elements are: SAFE - non-positive, backlash-free and highly precise fastening of pulleys FAST - marked gain in time needed for assembly FLEXIBLE - wide range of applicability, high delivery standard ECONOMICAL - reduction in costs SPACE-SAVING - extremely compact, no overhang NON-CORROSIVE - made predominantly of stainless steel Shaft-to-hub connections with BOQA fastening elements are insensitive to extreme load alternations. They can be easily adjusted axially and radially, are easy to mount and dismount. Any additional forming of the shaft or other adjustment work will not be necessary.

The pressure transmitter illustrated here measures differences in pressure between the two connections of the measuring element. Pressure differences can be measured with respect to a reference pressure, such as atmosphere, or to the command variable of a regulation system. Equally, however, it is possible to measure pressure differences within systems that have a high static pressure. One practical example of this would be measuring a flow rate by determining the pressure drop occurring across a metering diaphragm. The differential pressure transmitter measures in both directions and can therefore, for instance, be used on double-acting hydraulic cylinders. Its construction permits it to be used with liquid or gaseous media. Venting holes simplify installation. The robust design and the use of stainless steel make it possible to use the pressure transmitter under tough operating conditions.

Fast and accurate measurements of the smallest resistance values are possible with the milliohmmeter RESISTOMAT® model 2316. Due to the rugged aluminium injection moulding desktop housing with membrane keypad it is suitable for use in laboratory and industrial environment likewise. Wires and coils can be measured with temperature compensation. The temperature of the sample is measured with a Pt100 or pyrometer and the resistance is then corrected to the equivalent at e.g. 20 °C (adjustable) in the instrument. The application range is very wide such as the measurement of: — transformer motor coil windings — coils of all kind — cables and wires on the drum or as meter samples — switch and relay contacts — heating elements — fuses — connections and transitions at power rails and many more Specific characteristics: — Autorange — Temperature compensation for all materials — Thermal e.m.f. compensation — Input voltage protection up to effectively 400 V rms

The tension and compression load cell model 8435 enables universal and fast installation, requires hardly any installation space and upgrades with technical data that are readily achieved by larger sensors. Due to its excellent price-performance ratio with regard to its mechanical and electrical data, the force sensor finds its place in products that are also manufactured in larger quantities and calculated with a small budget. This model of load cell uses proven strain gage technology to perform measurements. Strain gages are applied to the sensitive element and connected to form a full bridge. FEATURES Measuring ranges from 0 ... 200 N up to 0 ... 5000 N Small dimensions Inexpensive execution Stable anti-kink protection Made of high quality stainless steel Connecting cable suitable for drag chains burster TEDS optionally available

Design: Active leaf door hinge, selectively DIN left or DIN right Standard surface: Anodised aluminium E6EV1 silver (E0) Low reflection, scratch-resistant surface High-strength, weather-resistant alloys Station lock with emergency exit function conforming to DIN VDE 0101 and 3-point locking Door arrester Earthing strip, M12 earthing connection Integration of ventilation elements and pressure relief units of different sizes Dimensions to suit building conditions Advantages: Production to your dimensions High-strength materials, weather-resistant, maintenance-free Design conforms to DIN VDE 0101

Design: Door hinge, selectively DIN left or DIN right Standard surface: Anodised aluminium E6EV1 silver (E0) Low reflection, scratch-resistant surface High-strength, weather-resistant alloys Station lock with emergency exit function conforming to DIN VDE 0101 and 3-point locking Door arrester Earthing strip, M12 earthing connection Integration of ventilation elements and pressure relief units of different sizes Dimensions to suit building conditions Advantages: Production to your dimensions High-strength materials, weather-resistant, low maintenance requirement Design conforms to DIN VDE 0101