Coatings-%20plastic - Import export

precise coating of flat parts

These systems can only be fastened by adhering (glue or double-sided tape). Adequate adhesive is available from specialised trade. The following materials can be found at the rear: A18B-Ks: Polyamide (PA) A22B-Ks: Polyamide (PA) A31B-Ks: Galvanised steel AS031NdB-00s-03: Polyamide (PA) A43B-Ks: Polyamide (PA)

Various sizes. Plastic-coated or bright-finished surface. Various hub versions.

Premium knurled aluminum handwheel. Compact design. Various sizes. Surface plastic-coated, anodized or bright-finished. Various hub versions.

Robust handwheel made of aluminum casting. Rounded design with dirt corners minimized. Various sizes. Plastic-coated or bright-finished surface. Various hub versions. Turning handle as an option (see accessories).

Suitable for neutral and aggressive liquids as well as liquids containing solids Application: Centrifugal pump for dry-well installation featuring a bearing-less cantilever design with direct-coupled IEC motor. Specially designed for plant engineering and confined spaces. The B80 HME Series can be operated beside the container in a dry-well installation. Liquid flowing up inside the shaft guide tube returns to the container via an overflow line. Pumps in dry-well installations allow an easier access to carry out maintenance and repair work. Features: Directly-coupled in bearing-less cantilever design Radial and axial fixed drive elements in two-piece bearing shell Pump housing in glass-fibre or carbon-fibre reinforced plastic (PP or PVDF) Gas seal for protecting the motor bearing Plastic-coated drive shaft Driven by IEC standardised motors Benefits: Compact dimensions Service-friendly dry-well installation Self-centring alignment in the bearing shell Vibration-free and...

The STS-spiral roller brush range from Kullen-Koti contains all measurements from small to extra large and this unbeatable selection of diameters makes this brush a totally reliable tool for light brushing tasks. Due to the high fill density and precisely ground surface it achieves outstanding results. A flawless radial true runing is a requirement in most cases to achieve the desired brush effect. Therefore the brush cores are electrodynamically pre-balanced and re-balanced according to the required RPM after assembly of the spiral brushes. The balancing quality refers to quality grade G 2.5 as per ISO 1940. As core material we have available: mild steel, stainless steel, non-ferrous metal or plastic coated steel. Fixing of the spiral coils The coils are generally mounted onto the roller cores with pressure rings (PRB) in order to prevent the brush from roating on the core. Depending on the work and the rotation speed of the brush the coils can also be spot-welded or screwed...

Our roller brush coil designed as welded package system will also pack the tiger in your tank! Why is it reasonable and advantageous to purchase a welded package system type 231? Each face width of a roller brush needed can be divided in a corresponding number of single, compact segments, called packages, that are not only loosley coiled spirals. What we produce are light and easy-to-handle packages with a constant high density which facilitates and accelerates the equipping of a brush core or shaft carried out by yourself.The welded package system is not only easy to mount but it also makes you independent of any transportation of the core to the supplier for refilling, packing, delivery times etc. and helps you out of emergency situations.For the core constructions the following materials are available: plastic-coated steel, steel, stainless steel (1.4301; 1.4571; 2.4879). The twin tape mounting is designed as a concave backing system where the coil widths (WB) ranges between...

Additional to the versatility of 11 particular types of aluminium profiles they can be supplied anodised resp. plastic coated in all RAL colours. We call as special types our 11 types of sealing brushes which we can produce in a big range of variations on your request. You can choose: - all fill types, e.g. natural fibres and bristles, plant fibres, wires and synthetic bristles- different trim heights (BH) (free bristle length)- the overall length from a few centimeters to the maximum length which can be transported. We also can supply all sealing brush types with fixing holes in the holding flanges, e.g. 22 available sizes of round holes and 13 sizes of elongated holes. Don't hesitate to ask us for other dimensions of fixing holes, too.

For universal outdoor use and permanent use on sites, IP 44. Robust, plastic-coated steel-tube frame for steady position and additional protection for housing. With an ergonomic carrying handle for comfortable carrying. Oil resistant rubber cable for permanent outside use. With RCD circuit breaker 30 mA for extra safety. Earthed sockets in pairs with different phases. Protective cover for fuses, lockable. Cable length: 2 m Cable: H07RN-F 5G4,0 Plug: CEE 400 V/32 A, 5-pin Socket: 1 x CEE 400 V/32 A, 2 x CEE 400 V/16 A, 4 x 230 V/16 A Protection: 1 x FI 40 A 4-pin, 30 mA 1 x LS 400 V/16 A 2 x LS 230 V/16 A Plug-in system: DE

RING LED is the solution for tasks involving miniature parts. When miniature parts need to be inspected or precisely processed at an industrial workplace, attention to detail is vital. RING LED has the perfect lens – and with its 63 LEDs also the optimum light to meet these requirements. Additional advantage: The luminaire also has an attractive appearance. • Maintenance-free LED technology • Low-distortion magnification right to the edge • Continuous dimming • Hard-coated plastic lens • Exactly adjustable flexible tube • Low space requirements

Thanks to the combination of optimum near vision and high light quality, the MLD magnifying luminaire can be used wherever the human eye comes up against its limits. A field of view perfectly that is adapted to suit your viewing distance provides distortion-free visibility and the ability to work ergonomically. Thanks to the smooth-running linkage technology and the infinitely variable dimmer function, the MLD magnifying luminaire is an indispensable tool in many industrial applications where the human eye is required to perform challenging tasks. — Colour temperature neutral white 5000 K — Colour rendering Ra > 80 — Glare-free thanks to satinised screen — Hard-coated plastic lens Ø 160 mm with 3.5 dioptres — Housing made of colourless anodised aluminium and grey plastic — Polycarbonate plastic screen — Ergonomic linkage technology with 2D head joint — Membrane key integrated into the luminaire head — for On/Off and dimming — Degree of protection IP20; protection class II