Results for
FRANKE GMBH
Germany
Franke bearing elements of type LEL are suitable for high demands on running characteristics and accuracy. Due to the hardened and CNC-ground raceway as well as the ideal geometrical adaptation of ball and raceway radius, they have outstanding bearing characteristics. Bearing elements of type LEL allow the greatest possible freedom of bearing design. The mounting space is between 5.9 mm and 20.9 mm. For special requirements, raceway thicknesses up to 20 mm and ball sizes up to 50 mm are possible.
Request for a quoteFRANKE GMBH
Germany
Franke bearing asseblies type LVC are bearing assemblies made of steel, designed as double row angular contact ball bearings with integrated bearing elements. Franke LVC are suitable for highest circumferential speeds. They convince by very high dynamics and a very low rotational resistance. The double row angular contact ball bearings in a 4-point arrangement are preloaded. They are insensitive to shocks and vibrations. The low rotational resistance and the minimal breakaway torque reduce the required drive power. Due to the low coefficients of friction, Type LVC bearing assemblies operate almost maintenance-free and achieve a long service life.
Request for a quoteFRANKE GMBH
Germany
Franke bearing asseblies type LVB are redy-to-install bearing assemblies with housing rings made of aluminium and integrated bearing elements. Franke LVB are suitable for medium rotational speeds and accuracies and convince by their light weight. LVB bearing assemblies are available at short notice, some of them even from stock. Designed as 4-point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. LVB sbearing assemblies are sealed on both sides and are set with preload.
Request for a quoteFRANKE GMBH
Germany
Franke slim bearings of the type LSA convince by their smooth running, extremely compact installation space, simple mounting and favourable price. Slim bearings of type LSA consist of an inner and outer race with hardened and profiled raceways and a plastic cage with retained balls. The rolling elements rest against the raceways at two points each, thus maintaining the 4-point system. The raceways are split and can therefore be changed elastically in diameter for installation.
Request for a quoteFRANKE GMBH
Germany
Franke bearing elements type LEW are suitable for medium rotational speeds and accuracies. They convince by smooth running even under tilt moment loads, high rigidity and compact installation space. The crosswise arranged rollers can support high loads from all directions. Bearing elements of model LEW are insensitive to shock and vibration. They offer the greatest possible flexibility in terms of preload, running characteristics and diameter ranges.
Request for a quoteFRANKE GMBH
Germany
Franke bearing elements type LER are suitable for medium rotational speeds and accuracies. They convince by smooth running, high dynamics and compact installation space. Due to the straight contact surfaces, they can be easily integrated into the surrounding design and have a high rigidity. The low price makes the bearing element of type LER an economical solution. LER are generally mounted without clearance. The preload can be individually adjusted according to the requirements.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
Hydrostatic bearings are characterized by practically frictionless movement. The corresponding linear guides are free from stick-slip effects and there is practically no wear on the guides. Gases (mostly air) or liquids (mostly oil) can be used as the carrying medium. Air-bearing guides are ideal, for example, for clean room applications or at high sliding speeds. If oil is used as the carrying medium, higher carrying forces can be achieved with the same size and better damping properties. Various designs are available, which can be customized at any time to meet special requirements in terms of installation space, load capacity, guide length / table diameter, drive type, position measuring system, etc.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
Hydrostatic bearings are characterized by practically frictionless movement. The corresponding linear guides are free from stick-slip effects and there is practically no wear on the guides. Gases (mostly air) or liquids (mostly oil) can be used as the carrying medium. Air-bearing guides are ideal, for example, for clean room applications or at high sliding speeds. If oil is used as the carrying medium, higher carrying forces can be achieved with the same size and better damping properties. Various designs are available, which can be customized at any time to meet special requirements in terms of installation space, load capacity, guide length / table diameter, drive type, position measuring system, etc.
Request for a quoteFRANKE GMBH
Germany
Franke bearing assemblies type LVE are bearing assemblies with toothed belt gearing, aluminium housing rings and integrated bearing elements. Franke bearing assemblies type LVE are suitable for medium rotational speeds and accuracies. They convince by their low weight and are available at short notice, in some cases even from stock. Designed as 4-point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. The bearing assemblies are sealed on both sides and adjusted to preload.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FRANKE GMBH
Germany
Franke bearing asseblies type LVG are bearing assemblies made of aluminum, designed as double row angular contact roller bearings with integrated bearing elements. LVG bearing assemblies are suitable for the highest load ratings. They convince by high rigidity, low rotational resistance and low weight. Designed as roller bearings, they can support high loads from all directions and are insensitive to shocks and vibrations. Franke LVG are sealed on both sides and are set with preload. By using aluminum, Franke beaing assemblies type LVG are 60% lighter than comparable steel bearings.
Request for a quoteFRANKE GMBH
Germany
Franke bearing asseblies type LVD are ready to install bearing assemblies with external gear, steel housing rings and integrated bearing elements. Franke bearing assemblies type LVD are suitable for medium rotational speeds and accuracies. They can be supplied at short notice, in some cases even from stock. Designed as 4-point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. The bearing elements are sealed on both sides and adjusted to preload.
Request for a quoteFRANKE GMBH
Germany
Franke Bearing Assemblies Type LVA are ready-to-install bearing assemblies with steel housing rings and integrated bearing element. They are suitable for medium rotational speeds and accuracies. They are available at short notice, some of them even from stock. Designed as 4 point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. Type LVA bearing assemblies are sealed on both sides and adjusted with preload.
Request for a quoteFRANKE GMBH
Germany
Franke FTB linear tables impress with their compact and robust design. The integrated aluminum roller guide is maintenance-free and protected from dirt by a metal cover. It is driven by a spindle. Franke FTB linear tables are suitable for precise processes in many measuring, testing and positioning applications. They are available in stroke lengths from 100 to 1500mm.
Request for a quoteResults for
Bear it - Import exportNumber of results
106 ProductsCompany type