Bar - Import export

coating system for high production quantities and individual transportation concepts

The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. With manual unlocking.

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry.

The dynamic way of sawing The HBE Dynamic series brings many features, which make your production even more profitable: — Solid and durable construction made of vibration damping grey cast iron — Sensitive BEHRINGER downfeed control system — Precise guiding system in portal design — Energy-efficient drive system — Excellent accessibility — Electrically driven chip brush, synchronized with blade speed — Easy operation by intuitive NC control system Different models based on cutting range ( 90° flat / 90° round): — HBE261A Dynamic: 300 x 260 mm / 260 mm — HBE321A Dynamic: 350 x 320 mm / 320 mm — HBE411A Dynamic: 510 x 410 mm / 410 mm — HBE511A Dynamic: 510 x 510 mm / 510 mm

CONTINUOUS USE OF UP TO 100 BAR – UNDER THE BAR FEEDER Thanks to the intelligent arrangement of its components, the combiloop CL2 is a particularly space saving solution that can be fitted under a wide range of bar feeders. The fine filtration inside this visually appealing system is based on protected contaminant pre-separation in the 3-chamber tank with easily accessible, washable wire mesh elements, and pressures up to 100 bar are delivered by a constant pump.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. RG52 series discharging bars are available for passive charging of electrostatic interference during production. They are ideal for discharging moving surfaces, especially metalized film or composite materials with metalized layers that do not permit the use of active discharge systems.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The EXR5C discharging bar is primarily used in applications where interfering electrostatic discharge on quick-moving materials affects the production process and therefore has to be eliminated. The bar is approved for use in potentially explosive atmospheres. It features a high discharge range and large depth effect, in addition to high active discharge power thanks to an isolated grounding conductor and safety thanks to passive discharge power when power supply units are disconnected.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. R45 discharging bars for actively discharging electrostatic interference during the production process. The bars are operated with an AC voltage of 5 or 6 kV at 50 to 60 Hz and are suitable for the discharge of moving surfaces. A high discharging range as well as a large depth effect thanks to the patented isolated grounding conductor.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. A universal bar with minimal dimensions for supply voltages up to 60 kV. It is used to charge surfaces for blocking and tacking purposes. The charging bar is mainly used where production processes and cycles run faster and with less interference if the materials used (such as films, foils, papers, etc.) adhere to each other. The parallel configuration of two or more bars allows surface-covering charging or operating the unit at high web speeds.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. Heavy-duty precision bar for supply voltages up to 60 kV. The charge and field distribution have been substantially improved by the optimized arrangement of the individual bars. Separate current-limited tips prevent an increase in air ionization and high-energy brush discharges.

DataMan 370 series fixed-mount barcode readers solve challenging direct part mark (DPM) and label-based code applications. With twice the computing power of conventional readers in its class, the DataMan 370 delivers faster decode speeds for greater throughput per facility, even when applications have multiple codes and symbologies.

Cognex barcode verification technology ensures the readability and compliance of 1D and 2D barcodes to industry standardization guidelines. Today most companies spot check codes one at a time using an offline, operator-based verifier which can be slow and cumbersome. The DataMan 475V series inline barcode verifier provides automated high-speed verification and quality reporting directly on your line to prevent product waste and chargebacks. Immediate feedback and visual diagnostic information provides operators with the ability to identify and correct printing and process control issues as they happen. Detailed reports can be generated for traceability, process control, and compliance.

For 1D linear barcodes, higher-density 2D matrix codes, or direct part mark (DPM) codes, the DataMan 150/260 series fixed-mount, image-based barcode readers deliver unprecedented performance, flexibility and ease-of-use. DataMan 150/260 series fixed-mount barcode readers achieve the highest possible read rates thanks to a high-speed, dual core processing engine that runs the latest Cognex algorithms. 1DMax with Hotbars and 2DMax with PowerGrid technology decode damaged or poorly printed 1D and 2D codes, despite code quality, printing method or surface that the codes are marked on, and can even read 2-D codes without visible perimeters or quiet zones. DataMan 150/260 series models offer straight or right-angled configurations to fit into the tightest spaces.

The MX-1000 is ideal for reading 1-D/2-D or DPM codes on automotive parts and label-based barcodes on packages and equipment. The flexible design accepts a variety of both current and future generation mobile devices and augments their capability in a fully ruggedized housing tough enough to stand up to the most challenging environments. The industrial-grade, rugged housing can handle up to 50 drops from 2 meters onto concrete. It is IP-65 sealed and uses inductive wireless charging so there are no exposed electrical contacts to wear out or fail.

The MX-1502 vision-enabled mobile terminal reads codes from as near as 15–30 cm to as far as 10 meters away, making it ideal for scanning barcodes on floor labels, rack labels on high shelves and slips hanging from warehouse ceilings. The MX-1502 is equipped with modular lighting and optics technology (including polarized LEDs and a high-powered lens with liquid lens technology) which provides optimal image formation of any code - even the most challenging direct part mark (DPM) codes. The industrial-grade, rugged housing can handle up to 50 drops from 2 meters onto concrete. It is IP65 sealed and uses inductive wireless charging so there are no exposed electrical contacts to wear out or fail.

For 1D linear barcodes, higher-density 2D matrix codes, or direct part mark (DPM) codes, the DataMan 150/260 series fixed-mount, image-based barcode readers deliver unprecedented performance, flexibility and ease-of-use. DataMan 150/260 series fixed-mount barcode readers achieve the highest possible read rates thanks to a high-speed, dual core processing engine that runs the latest Cognex algorithms. 1DMax with Hotbars and 2DMax with PowerGrid technology decode damaged or poorly printed 1D and 2D codes, despite code quality, printing method or surface that the codes are marked on, and can even read 2-D codes without visible perimeters or quiet zones. DataMan 150/260 series models offer straight or right-angled configurations to fit into the tightest spaces.

The DataMan® 8072 Extended Range (ER) handheld barcode reader is designed for logistics and warehousing applications, reliably reading 1D and 2D label-based barcodes from up to 8 meters away. It features the latest patented algorithms, liquid lens technology, and high-powered LED lighting and laser aimer for efficient long-range scanning. The DataMan 8072ER deciphers codes from up to 8 meters (26 feet) away, making it ideal for scanning pallet labels on high shelves or slips hanging from a warehouse ceiling. This barcode reader has a 1.2-megapixel sensor to improve resolution and image formation.

DataMan® 8050 series readers are equipped with Cognex’s world-class barcode reading algorithms and designed to withstand harsh factory floor conditions. The best in class algorithms decode even challenging barcodes quickly and easily including Direct Part Mark (DPM) codes. And, the flexible modular design ensures the DataMan 8050 series readers are ready to meet ever changing communication needs. The DataMan 8050 series of industrial barcode readers feature field interchangeable communication modules and enable one reader to be configured to meet specific communication needs to support corded RS-232, USB, and Ethernet options, as well as cordless options including Bluetooth and Wi-Fi.

The DataMan® 8072 DPM Lite (DL) handheld barcode reader delivers powerful barcode reading performance for tough DPM codes on flat, highly reflective surfaces. It features the latest patented technology and advanced lighting and optics, ideal for automotive, aerospace, and medical device industry applications. DataMan 8072DL handheld barcode readers are optimized with powerful algorithms and technologies to read DPM, as well as 1D and 2D label-based barcodes, in the most demanding industrial environments. 2DMax® with PowerGrid® technology is a breakthrough 2D decoding algorithm, designed to read 2D codes with significant damage.

The DataMan 470 barcode reader has seven powerful processing cores, enabling it to run multiple algorithms and processes in parallel at astonishing speeds. It reads challenging 1D and 2D codes in varied locations, as well as multiple mixed symbologies simultaneously while maintaining the highest decode rates. DataMan 470’s innovative imaging technology delivers unprecedented coverage and speed allowing greater process variation and lower facility design costs. It enhances the image quality of 1D and 2D codes and reads barcodes not even visible to conventional readers.

DataMan 280 series fixed-mount barcode readers offer fast decoding, easy setup, and valuable Industry 4.0 features, like web browser connectivity and performance monitoring, in a small form factor. DataMan 280 was engineered to better track and trace items throughout manufacturing and logistics supply chains solving a broad range of tough 1D, 2D, and direct part mark (DPM) code applications. DataMan 280 series was designed to be flexible. The modular hardware and software can be configured to solve any barcode reading challenge. Easily decode difficult DPM codes on challenging automotive and medical device surfaces. Read multiple label-based barcodes simultaneously on boxes and pallets, even behind specular wraps. And accurately read user presented codes with a large depth of focus for speedy handling.

Roll forming of all sheet metal materials such as steel, aluminum, stainless steel, copper, titanium, molybdenum, pre-painted materials, composite materials from 0.08 mm material thickness.

With the newly developed XELLAR profiling system, PROFILMETALL combines for the first time all requirements for smart profiling in one system: Whether roll forming, punching or weld Features and benefits Intelligent digital process communication for sensor monitoring, electronic tool adjustments ... Free choice of drive concepts, tailored to the product Customized system concepts and modules Individual equipment - integrated in the machine frame, e.g. B. coolant pan, roll forming tool storage compartment, drawer, controls Closed production system for more safety and noise reduction Coolant splash protection through protective hood Integrated oil mist extraction Resource-saving housing design enables the housing modules to be reused inexpensively when changing products Machine-integrated transport device for quick spatial relocation Simplification of the change of roll forming tools through a new machine design

The ASO 310 is used for deburring and rounding off edges on workpieces made of steel, stainless steel, aluminum and other materials. With the standard ball bearing, it is suitable for processing drill holes and openings starting with an internal diameter of 12 mm and a sheet thickness >8mm. With the optionally available stop collar for thin sheets, drill holes and internal diameters starting at 14 mm and a sheet thickness of >2mm can be processed. The edge break with R1 or R2 is only possible in combination with the stop collar for thin sheets. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer size can be set through the rotary plate.

The ASO 312 is for the chamfering and rounding off of workpieces with straight edges. The edge break with R2 - R4 is only possible by replacing the turning plate. A secure and simple handling is possible through the prismatic guide and additional handle. This helps us achieve a particularly clean and vibration-free chamfer quality. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer angle can be gradually set between 15 - 45°.

The ASO 300 is used for deburring and rounding off edges on workpieces made of steel, stainless steel, aluminum and other materials. It is suitable for processing drill holes and openings starting with an internal diameter of 7.0 mm. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer size can be set precisely through a scale. Advantages: For 45° chamfers and for rounding edges Bores starting at Ø = 7 mm can be processed Can be used for straight edged and contours Reliable compressed air motor Compact and light (500g) construction Insert milling cutter for efficient chamfering One-handed operation Safety lever valve