Automatic switches - Import export

Based on its specifications, this device can be used in various applications. It is especially suitable for resistance measurement on insulating materials such as e.g. cable insulations, foils, textiles, surfaces, insulating liquids,etc. With a test voltage of 45 V, 100 V, 250 V and 500 V the device fulfi ls most test specifi cations such as e.g. DIN 51953, 53482 and 54345. The guard switching allows single resistance measurements in a triangle wiring. This could be e.g. a two line cable with common shield or the measurement of insulating materials on a guardring measurement cell. The selection of the measurement range is done manually or automatically. Fast subsequent measurements can be realized by the internal limit value indicator. When the measured value exceeds the limit the limit value indicator switches and activates a potential-free relay output. The megohmmeter RESISTOMAT® model 24508 is the right instrument for its use in laboratory as well as in industrial applications.

The B2 Battery drum pump is suitable for low-viscosity, aqueous to slightly viscous media, such as plasticisers, cold cleaners and lubricants. The set is suitable for dispensing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources. The set is supplied without battery and charger. * Replaceable, powerful rechargeable battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge empties approx. 12 x 200 litre containers Features & benefits * BLDC motor with high efficiency up to 70% * Infinitely variable * Long battery life * Automatic switch-off in case of overload * Sophisticated quick-release fastener * The max. flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20° C. The measurement is taken at the pump's discharge nozzle, without hose, nozzle or flow meter.

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life approx. 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic switch-off in case of overload * sophisticated quick lock * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic switch-off in case of overload * sophisticated quick lock * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The first flowmeter with touch screen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design: The rotating swash plate and a magnet enable the precise measurement of the flow rate and measure oils, aggressive media such as acids and alkalis precisely, quickly and above all efficiently. As an option, the desired quantity can be preselected with a quantity preselection ( relay module), so that the pump or the system switches off automatically after the selected quantity, thus further simplifying and securing the operation of the systems. * Optional with quantity preselection (relay module) * Media examples: Hydrochloric acid, nitric acid, etc. * Measurement according to the swash plate principle * High measuring accuracy * Touch screen display with self-explanatory, multilingual user interface * Measuring range from 10 l/min- 100 l/min

The first flowmeter with touch screen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design: The rotating swash plate and a magnet enable the exact measurement of the flow rate and measures solvents, acids, alkalis, highly inflammable liquids, oils and neutral media precisely, quickly and above all efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module), so that the pump or the system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems. * Optional with volume preselection (relay module) * Media examples: Methanol, petrol, isopropanol, kerosene, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc. * Mobile on a Drum pump or with a nozzle connection or stationary in plant engineering

Situations often occur in practice in which it is necessary to place a measuring amplifier immediately in the neighborhood of the sensor in order to be able to access a standard signal there. In this way, long distances to the evaluating electronics can be covered. This task can ideally be performed by the 9236 in-line measuring amplifier. With its high degree of protection (IP67) its singlechannel version can be integrated into the application even in the tough environment outside the switch gear cabinet. — Automatic production machinery — Laboratory measurements — Integration into customer‘s circuit boards — Field measurements Features: — Operates with up to 4 measuring channels — Voltage output 0 to ± 5 V / 0 to ±10 V — Protected against reverse connection and short-circuit — Also available as circuit board without housing — Simple configuration using DIP switch — High degree of protection up to IP67

The first flowmeter with touch screen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design: With its rotating swash plate and a magnet, it enables the exact measurement of the volume flow and measures aqueous and fatty foods precisely, quickly and above all efficiently. As an option, the desired quantity can be preselected with the quantity preselection (relay module), so that the pump or the system switches off automatically after the selected quantity has been reached, thus further simplifying and securing the operation of the systems. * Optional with quantity preselection (relay module) * Mobile on a Drum pump or with a nozzle connection or stationary in plant engineering * also for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents

The first flowmeter with touch screen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design: The rotating swash plate and a magnet enable the exact measurement of the flow rate and measure easily flammable food precisely, quickly and above all efficiently. As an option, the desired quantity can be preselected with the quantity preselection (relay module), so that the pump or the system switches off automatically after the selected quantity has been reached, thus further simplifying and securing the operation of the systems. * Optional with quantity preselection (relay module) * Mobile on a Drum pump or with a nozzle connection or stationary in plant engineering * also for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents

The first flowmeter with touch screen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design: The rotating swash plate and a magnet enable the exact measurement of the flow rate and measures acids and alkalis, almost all solvents and highly inflammable liquids precisely, quickly and above all efficiently. As an option, the desired quantity can be preselected with the quantity preselection (relay module), so that the pump or the system switches off automatically after the selected quantity has been reached, thus further simplifying and securing the operation of the systems. * Optional with volume preselection (relay module) * Media examples: Hydrochloric acid, nitric acid, styrene, petrol, acetone etc. * Mobile on a Drum pump or with a nozzle connection or stationary in plant engineering

The first flowmeter with touch screen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design: The rotating swash plate and a magnet enable the exact measurement of the flow rate and measures solvents, acids, alkalis, highly inflammable liquids, oils and neutral media precisely, quickly and above all efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module), so that the pump or the system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems. * Optional with volume preselection (relay module) * Media examples: Methanol, petrol, isopropanol, kerosene, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc. * Mobile on a Drum pump or with a nozzle connection or stationary in plant engineering

The first flowmeter with touch screen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design: The rotating swash plate and a magnet enable the exact measurement of the volume flow and measure thin to medium viscous media such as water and mineral oils precisely, quickly and above all efficiently. As an option, the desired quantity can be preselected with a quantity preselection (relay module), so that the pump or the system switches off automatically after the selected quantity.thus, the operation of the systems is simplified and secured even more. * Optional with volume preselection (relay module) * Media examples: Water, oil, diesel, heating oil, hydraulic oils etc. * Mobile on a Drum pump or with a nozzle connection or stationary in plant construction

For disconnection of electrical power wrenches in connection with Value Master Base or GMV2 100 - 240 V / 50 - 60 Hz switching capacity approax16 A protection IP64 Safety plug

For disconnection of electrical power wrenches in connection with GMV2 100 - 240 V / 50 - 60 Hz switching capacity approax 16 A protection IP40 Safety plug

Extra bright SMD LEDs with up to 2 hours powerful light when battery fully charged. Automatic switch-on in the event of a power failure, when removed from the charger or moved in darkness. PIR sensor with 120° horizontal detection angle and max. 3 m range. When off the charger, can be used as a flashlight with 2 SMD-LEDs or surface light with 16 SMD-LEDs. Installed Li-Ion battery is charged inductively. Charger 230 V, 50 Hz. In blister packaging. LEDs: 16 SMD + 2 SMD Luminous flux: lm front 40 lm / top 60 lm Light duration: h Battery operated max. 2 h Colour: White Measurements: 133 x 63 x 80 mm

With Master-Slave function and surge protection. Protects expensive devices from overloads with a max. surge current of up to 19.500 A. With the switching ON/OFF of the device, which is plugged into the master socket, all further appliances in the slave sockets can also be automatically switched ON/OFF. Increased convenience with 1 Master socket (3500 W) and 5 Slave sockets (3500 W). Adjustable threshold for cut-out (approx. 8 to 80 W). Operating indicator for surge and for slave sockets. Illuminated 2-pole ON/OFF safety switch. Childproof sockets in a practical 45° arrangement. Total output 16 A/3500 W. Extra-long 3 m cable. In blister packaging. Design protected. Cable length: 3 m Cable: H05VV-F 3G1,5 Length approx.: 45 cm Socket: 1 Master 5 Slave Nominal current: 16 A Interference filter: - Colour: Anthracite Equipment: -

With Master-Slave function and surge protection. Protects expensive devices from overloads with a max. surge current of up to 19.500 A. With the switching ON/OFF of the device, which is plugged into the master socket, all further appliances in the slave sockets can also be automatically switched ON/OFF. Increased convenience with 1 Master socket (3500 W) and 5 Slave sockets (3500 W). Adjustable threshold for cut-out (approx. 8 to 80 W). Operating indicator for surge and for slave sockets. Illuminated 2-pole ON/OFF safety switch. Childproof sockets in a practical 45° arrangement. Total output 16 A/3500 W. Extra-long 3 m cable. In blister packaging. Design protected. Cable length: 3 m Cable: H05VV-F 3G1,5 Length approx.: 57 cm Socket: 1 Master 5 Slave 2 Permanent Nominal current: 16 A Interference filter: - Equipment: 2 permanent sockets Plug-in system: DE Colour: Anthracite

With digital Master-Slave function, overload protection and interference filter. Protection for your appliance from malfunctions in the mains, such as surges, indirect lightning strikes or circuit noises, with a maximum sum of leakage current of up to 30.000 A. Top quality protection against HF interference by means of an integrated filter. With the switching ON/OFF of the device, which is plugged into the red master socket, all further appliances in the slave socket can also be automatically switched ON/OFF. For example, you can use a computer as a master device, which can embrace slave appliances in the automatic control such as, e.g. monitor, sound-system, printer, scanner etc. Meets the high standards for the environmental safety symbol "The Blue Angel" - minimizes standby losses - low energy consumption - avoids materials that pollute the environment. Digital: Saves the correct setting for your master unit at the push of a button. Modern: Switches your slave unit safe and...

With digital Master-Slave function, overload protection and interference filter. Protection for your appliance from malfunctions in the mains, such as surges, indirect lightning strikes or circuit noises, with a maximum sum of leakage current of up to 30.000 A. Top quality protection against HF interference by means of an integrated filter. With the switching ON/OFF of the device, which is plugged into the red master socket, all further appliances in the slave socket can also be automatically switched ON/OFF. For example, you can use a computer as a master device, which can embrace slave appliances in the automatic control such as, e.g. monitor, sound-system, printer, scanner etc. Meets the high standards for the environmental safety symbol "The Blue Angel" - minimizes standby losses - low energy consumption - avoids materials that pollute the environment. Digital: Saves the correct setting for your master unit at the push of a button. Modern: Switches your slave unit safe and...

With digital Master-Slave function, overload protection and interference filter. Protection for your appliance from malfunctions in the mains, such as surges, indirect lightning strikes or circuit noises, with a maximum sum of leakage current of up to 120.000 A. Added protection against interference pulses via telephone, ISDN/DSL or aerial ports. Top quality protection against HF interference by means of an integrated filter. With the switching ON/OFF of the device, which is plugged into the red master socket, all further appliances in the slave socket can also be automatically switched ON/OFF. For example, you can use a computer as a master device, which can embrace slave appliances in the automatic control such as, e.g. monitor, sound-system, printer, scanner etc. 1 Master, 4 Slave and 4 permanent sockets (alternative adjustable: 9 permanent sockets). Meets the high standards for the environmental safety symbol "The Blue Angel" - minimizes standby losses - low energy...

It is not only the shape and variety of colors that make PARA.MI so impressive, it also comes with a number of practical functions. The luminaire head can be pivoted and turned, while the distinctive self-locking joints are continuously flexible and completely maintenance free. • A bright LED module in different light colors creates homogeneous, wide-angle task lighting with a maximum consumption of just 7 W • Specially developed reflector for glare-free working • Switching and dimming with memory function via easily accessible control button in the luminaire head • Automatic cut-out and switch-on behavior can be adjusted • Flexible connection possibilities for furniture systems • Can be chosen with easily adjustable single or double arm

It is not only the shape and variety of colors that make PARA.MI so impressive, it also comes with a number of practical functions. The luminaire head can be pivoted and turned, while the distinctive self-locking joints are continuously flexible and completely maintenance free. • A bright LED module in different light colors creates homogeneous, wide-angle task lighting with a maximum consumption of just 7 W • Specially developed reflector for glare-free working • Switching and dimming with memory function via easily accessible control button in the luminaire head • Automatic cut-out and switch-on behavior can be adjusted • Flexible connection possibilities for furniture systems • Can be chosen with easily adjustable single or double arm

The -BASIC-LIFT- vacuum lifting device is designed exclusively for lifting and transporting airtight, flat and clean materials. Without battery or inconvenient power cables and thus purely mechanical, it is absolutely independent. But yet this type can lift loads of 1,200 kg and above. Functionality and characteristics The tried and tested modular AERO-LIFT system can be flexibly adapted to the job to be done and also used for very low loads. To ensure a long service life, all suction plates and sealing lips are made of high-duty perbunan. Its saftey is additionally guaranteed by vacuum gauge and a battery-operated warning device (the only electrical components of the lifter) and meets the requirement of the EU norm EN 13155. Handling is extremely easy. Every time the lifter is put down it automatically switches from „Suction“ to...

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes.In our product portfolio for measuring electrostatic charges and leakage resistances you will discover systems and products for many industrial sectors. Electric Field Meter EM03: Handy appliance for the measurement of static charges, measuring distance ranging from 2 to 20 cm. The field strength is converted automatically and displayed in volts. Measuring range from ±0 to ±200 kV, automatic switching between measuring ranges, measured values are displayed on a 2-line alphanumerical LCD display. Dimensions: 114 x 68 x 25 mm (L x W x D)

SHINING 3D OptimScan5M 3D scanner is the latest blue light 3D scanner in the market, featuring highend outlook, structure, component and configuration. Its 5.0 mega pixel cameras and blue light scanning technology bring users amazing scanning speed and accuracy, suitable for highend application like defense, aerospace, mould industry, etc.OptimScan5M Metrology 3D Scanner equipped with Blue Light Technology enables you to scan more kinds of objects with dark color feature or metallic materials.Higher Performance Adjustable Scan Ranges 5.0 mega pixels cameras bring you higher resolution, better quality Overall accuracy could be contained within 0.08mm/mFasting Scan speed Single scan time is under 1.5 seconds Data registration is free to switch between automatic alignment and manual alignment.

The electropermanent load lifting magnet traverses TBK4 and TBK6 with automatic telescopic arm allow the lifting and transportation of sheets in different sizes from 3m to 16m. The patented solid steel modules are more heat-resistant than comparable modules made with a plastic casting mass. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the magnet traverses from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 5 mm. Magnet modules that are not needed can be switched off with the multi-channel control. This means a large magnet traverse system can be securely used for the transportation of smaller sheets.

The EPM M electropermanent load lifting magnets are used where there is a frequent change of workpieces due to the very short switching times. Only a 230V rated current, depending on magnet with 230V or 400V, must be provided to use these devices and they are then immediately ready for use. Through electrical impulses within seconds, the EPMM from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. The electropermanent battery lifting magnet EPMM can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 4 mm.

The electropermanent load lifting magnets from the EMPH series are suitable for the lifting and transportation of individual slabs and unprocessed blocks. These magnets are used to handle loads with a large air gap or with scaled surface. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the EPMH from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. Through the impulse current control, the EPMH load lifting magnets do not use much energy. The effectiveness and efficiency can be seen on the one hand in the reduction of operating costs and on the other hand in a saving of time.

The EPMB electropermanent battery lifting magnets are considered the best load lifting magnet development in the past decades at ASSFALG. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the EPMB from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. The electropermanent battery lifting magnet EPMB can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 6 mm. All technical data can be found in the .pdf file.