Results for
FLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FX-R is the series for round material handling. The deep shallow-angled prism ensures safe positioning on the load and guides the magnetic field deep into the material. The magnet system can be switched well in the entire diameter bandwidth and does not recoil, shearing of the load due to twisting is prevented by the overlapping prism. Flat material, even with low material thickness, is no problem for the FX-R. With hot workpieces, the deep prism protects the magnet core from overheating. The lifting magnet for shafts and bars.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FX-P is the lifting magnet series for professional lifting and moving of thinner sheets, tubes and bars. The special Magnet-Coniguration in conjunction with the prismatic pole of the FX-P ensures maximum lux density even on thin material thickness. The FX-P can be positioned well on round tube and gently pressed.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FX-VV is the lifting magnet for profiles and hot components. The long, narrow design is conceived to pick up beams and profiles, also on the inner web of the beam, and reach their maximum holding force even with comparatively thin material thickness, so that even thin sheets can be lifted safely. Thanks to the 90° double prism, angle profiles can now be can now be picked up on the inside and outside, or components can be turned. Steel fabricators rely on FX-VV.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FX-C lifting magnets have a round, multipole clamping surface, designed for lifting rings, sleeves, bearing housings, flange plates and similar workpieces.The load specification is valid for full-surface mounting on workpieces which cover D inside to D outside (see table Dimensions), for workpieces with a smaller mounting surface an approximate maximum workpiece weight of 3.5 kg per cm² clamping surface can be calculated. For serial workpieces, a documented test should confirm the safety factor 3.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio. First choice for all users who want to move massive sheets and blocks.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FX-WP lifting magnets are waterproof to 1.5m diving depth. The multi-sealed, super-strong permanent magnet system sits in a fully nickel-plated magnet body. It is a diver. FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Pneumatically actuated magnetic gripper type PNEUMAG are pneumatic switchable bi-stable magnetic systems. Air pressure is only needed for switching. The magnet system is permanent and thus keeps safe even with pressure drop. PNEUMAG magnetic grippers enable thin, perforated or textured sheet metal parts (from 0,5mm) take and safe to transport what they recommended specifically for use in automatic and semi-automatic feeding systems as well as slings for robot grippers. PNEUMAG is the alternative to vacuum conveying systems. They were tested on a metal sheet St37 with smooth and clean surface. Note that depending on the application a safety factor of 2 or 3 has to be included.
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
The Controller 14.422 serves to excite the magnetic particle clutches and brakes. The excitation current can be influenced by a dancer potentiometer or a master voltage. The built-in current controller ensures that, despite varying coil temperature the current is constant. Other important features of the controller are: Setpoint integrator, control amplifier and temperature monitoring through an optional thermal switch at the magnetic particle clutch or brake. Should the body temperature become too high, the controller simply switches off.
Request for a quoteASSFALG GMBH
Germany
The positioning drawbar has a gradual flexible range of +/- 60°. The adjustment occurs easily by loosening the hand brake. A wireless remote control can be installed directly on the handle to switch the magnets on and off. Other remote controls to control cranes are possible on request. All technical data can be found in the .pdf file.
Request for a quoteASSFALG GMBH
Germany
The electropermanent battery lifting magnet SBs are top products from ASSFALG in the 200kg | 500kg | 950kg load range for flat material. Round material can be lifted with up to 50kg | 200kg | 400kg. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the electropermanent battery lifting magnets SB200 | SB500 | SB950 from ASSFALG can be automatically or manually switched with the push of a button. Even though no electricity is present during the load transportation, the workpiece is clamped as securely as it would be with permanent load lifting magnets. Approximately 1,000 ON/OFF switch cycles are possible until the integrated batteries must be recharged through a simple power connection. The electropermanent battery lifting magnets SB200 | SB500 | SB950 can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation.
Request for a quoteASSFALG GMBH
Germany
The AR series was specifically designed for workpieces that do not have any level contact surfaces. They are only switched on or off with a short compressed air impulse. Workpieces with level, flat, round or irregular surfaces are transported without effort. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. The magnets are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.
Request for a quoteASSFALG GMBH
Germany
These magnet welding angles can be gradually adjusted in their angle from 30° to 275°. Every leg can be switched separately. These magnet clamping angles hold round and square tubes and flat material secure. Thanks to the engraved scale and the quick release, the angles can be quickly and precisely set.
Request for a quoteResults for
Magnetic switches - Import exportNumber of results
13 ProductsCompany type