Inspection - Import export

Optigrun Combi Inspection Chamber TKS Plus is a control shaft for use as roof outlet inspection; includes base plate and cover. Extendable in 100 mm increments. Combinable with Triangle Water Discharge Profiles.

Optigrun Inspection Chamber TAR 250 to keep roof drainage outlets free with four connection options for TAR 80/250 or TAR 120/250.For pressure drainage and keeping drainage outlets free 4 possible connections for the drainage gutter TAR 80/250 or TAR 120/250 (preperforated openings) Chamber walls and lid with entry seals With aluminium chequered plate Walkable

Inspection chamber for use on greened or gravelled roof areas above drains in edge areas directly before any ascending structural components.Special inspection chamber for use over roof drainage outlets at the edge before ascending components, especially for outlets at the side through the fascia Chamber walls and cover with inlet slots, possible to connect 2 lengths triangle water conduit plus on three sides Chamber cover with inlet slots, compressive strength approx. 150 kg Insensitive to humid acid Reverse releasable 80 mm high

Complete optical packaging inspection Vision inspection system SealSecure checks the seal and seams on the package, labels and information on the top and bottom or the sides of the products. The stand-alone vision inspection device detects non-conforming packages prior to packaging and rejects them, if there are product, package discrepancies or deviations. The staff are then immediately warned visually and audibly in order to be able to intervene and rectify the problem. Vision inspection system SealSecure prevents extensive and costly rework, eliminating claims and product recalls due to non-conforming packages. In addition, the Vision inspection system SealSecure ensures that only flawless products reach the market or end user. In addition, all the product images are saved in the production system and the relevant production reports are generated, the vision inspection system contributes to complete traceability of the production line. The Vision inspection system SealSecure...

Special version of the Optigreen Triangle Maxi Inspection Cham-ber TMK with perforated intermediate floor to guide excess water from higher roof areas.For feeding and conveying excess water from rooftops located higher up to floors located lower down Conveys water through downpipes directly into a tie-in conduit with an open inlet at the top, e.g. in case of: Cascading drainage from smaller top floors, feeds roof drainage water from downpipes on façades into drainage levels of underground car parks or similar Can be connected to up to 6 WLP Plus and 3 TSK With perforated sheet metal intermediate partition Walkable

Optigrun Edge Inspection Chamber RKS 80 for use on greened or gravelled roof areas above drains on edge areas directly before any ascending structural components.Especially suitable for use around edges in front of rising components Above rainage outlets for green or gravelled rooftops Can be connected to 3 strands of WLP Plus Triangle Water Conduit Inspection lid with entry seals Insulation wedge profile released from the back Walkable

Optigrun Polymer Concrete Inspection Chamber PBK to be used as a drainage unit to guide surface water, corresponding to the respective requirements in the suitable composition, on stable substrates (e.g. underground garage decks) with a sufficiently high layer thickness.Inspection chamber for drivable surfaces Different gratings available for vehicular traffic and foot traffic Excess water can also be infed from the drainage level with the aid of TSK water conduits

Efficient control of packaging and label content in labeling lines The Bizerba LabelSecure vision inspection system automatically checks label position and texts. Bizerba LabelSecure can be integrated in conveyor lines with dynamic checkweighers. Thereby offering a high level of flexibility and adaptability to existing systems. Used with an inline dynamic checkweigher the system will add another level of protection on your production line. Consider the Dynamic checkweigher CWEmaxx. The system will checkweigh and reject any over filled and under filled packages. In addition, the vision inspection system performance is impressive, automatic control of label position, texts and film colour. Any packages that do not conform to the programmed or set criteria will be rejected. Also, package sizes and bar codes are verifiable. All packages that fall outside of the date range set up in the Vision Inspection System will be rejected, Ensuring out of date or short sell by dated products...

The end-of-line X-ray inspection system offers maximum safety. By using X-ray technology the XRE-D detects contaminated, damaged and defective products and packagings. Besides metallic and non-metallic foreign objects it detects missing, defective or misshaped products as well as overweight or underweight. Thanks to an efficient quick conveyor belt change system the belt can be changed within two minutes. The product inspection system XRE-D X-ray inspection system detects all foreign objects, which due to their density, chemical components or mechanical dimensions absorb X-rays at a higher or lower degree than the surrounding product. During production numerous detection tasks can be safely fulfilled such as the detection of metals, glass, ceramics, stones, raw bones, PVC, Teflon, rubber, glass fibre reinforced plastics etc. In packaged or unpack-aged food (non-magnetic stainless steels and non-ferrous metals in aluminium packaged food). X-Ray inspection is an ideal solution for...

Optigrun Triangle Maxi Inspection Chamber TMK suitable for negative pressure drainage. Combinable with Triangle and TSK water discharge systems. Drainage capacity for 2 % roof pitch and profiles connected to all four sides: 24 l/s. Extendable in 50 and 100 mm increments.

The reference information is then applied during service and inspection visits to ensure that the expected performance levels are being met. All inspections are carried out by fully qualified Lipp professionals, who utilise the latest analytics equipment. Efficiency tests can be run on each system and cross referenced – helping highlight any operational issues that may have occurred. This comprehensive analysis further notifies Lipp and the end user which parts of the system may need particular attention or replacement. Qualified Lipp technicians also have the skills needed to deal with more specialised installations, such as anaerobic digestion tanks for biogas production. By providing the same level of technical proficiency as the original installation team, Lipp safeguards the quality level of maintenance activity and the tank itself. Lipp technicians also impart knowledge and training to the end users, so that everyone can become familiar with their system

INDIVIDUAL SERVICE FOR EVERY CUSTOMER After installation of a Lipp tank system, the primary concern is safeguarding the market leading performance of all the associated parts. This process begins from the very first consultation – as Lipp produces efficiency estimates and process diagrams as a comparison point. Lipp understands the particulars of every system that it installs, helping to bring a personalised service and a one stop shop to every customer

camera based end-of-line inspection machine for aerosol cans

The robust metal detector can be variably used in dry and wet environments. It ensures best test results for packaged or unpackaged piece goods. VARICONcompact safely checks for any contaminants enclosed in the product such as steel, stainless steel and non-ferrous metal, e.g. aluminum. The compact metal detection system works with highest detection sensitivity. Ideally suitable for a save test performance. With its robust stainless steel conveyor belt construction the VARICONcompact inspects piece goods of up to 20 kg. A very short metal-free zone (MZ) ensures interference-resistant, reliable inline metal detection.

Metal detection coil INTUITY reliably detects enclosed contaminants in your product or bulk goods. INTUITY can be flexibly used in dry or wet areas and achieves best results with its multi-simultaneous frequency technology: It simultaneously checks with at least two frequencies if your packaged or unpackaged product contains steel, stainless steel, iron or non-ferrous metal. The metal detection coil helps you to enhance the quality of your products and to minimize the risk of possible recalls. INTUITY reliably checks if your packaged or unpackaged products or bulk goods include metal foreign objects. It is impressive in terms of its high accuracy: With its multi-simultaneous technology it checks at the same time with at least two frequencies within a range between 30 and 900 kHz

Quick and reliable detection of all ferrous and non-ferrous metals in packaged and unpackaged piece goods. The compact metal detection system offers you safe performance and highest detection sensitivity. With its robust stainless steel conveyor belt construction the VARICON+ inspects piece goods of up to 50 kg. A very short metal-free zone (MZ) ensures interference-resistant, reliable inline metal detection. To suit the area of installation the system is available with a modular belt (wet area) or a flat belt (dry area). The conveyor belts are available with variable belt widths. The motor controller is fitted either with a conveyor stop in case of metal detection or an application-specific rejection system. For easy and thorough cleaning the VARICON+ series has a hygienic design. Quality which is reflected in BRC, IFS and HACCP certifications. The VARICON+ comes with IP65 protection. Higher IP ratings are optionally available.

Optigrun Triangle Collection Channel TSK is compatible with Optigrun Water Discharge Profiles.

We are of course at your side if you have any questions about your system. Simply contact the project engineer in charge of you or use the contact form. We support you by phone, via remote maintenance over the Internet or, if required, support directly at your location.If you don't want to burden yourself with the recommended maintenance work, we can do it for you. Simply contact us if necessary or conclude a maintenance contract right away.In the case of demanding products, a collision can sometimes occur during production. Call us now and we will find a solution how you can restart your production as soon as possible. We offer you the option of replacing your spindle with a replacement spindle and you don't have to wait for the repair to be completed.

The drainage gutters are suitable for all applications in which excess water needs to be drained quickly and in a targeted manner: terraces, façades and other rising components, as well as around the eaves of pitched roofs. Gutters are particularly crucial with barrier-free designs. They are made of galvanised steel or stainless steel and are available in various lengths, heights and cross-sections.For drainage surface water from pavements, e.g. in inspection chambers above drainage outlets For draining driving rain on façades Fixed height or height-adjustable Available with many different covers Various accessories such as branch lines and end caps

Optigrun Triangle Water Conduit WLP Plus is used as water conduit system to support the discharge of excess water from drainage and substrate layers. Profiles may be interconnected by means of simple click-locks to any desired length.

As a load distribution panel for the Optigrun system solution "Public Roof with Inspection Chamber". Including Optigrün Water Retention Box WRB 95 with corresponding cut-out.

Automatic inspection and test unit: Automatic choice of measuring ranges from 200 μΩ to 20 kΩ Resolution up to 1 nΩ Standard interfaces IEEE488, RS232, RS485, (USB and Ethernet option) Checking of tolerances, classifi cation with statistics Highest measuring accuracy: Measuring error ≤ 0.01 % Future-orientated measuring method with thermal e.m.f. compensation. High level of stability due to constant comparisons with internal reference values. Inductive probes: Current regulation results in voltage-free disconnection, calculation of cooling curves of coils. Menu control: Setting for measuring current entry for absolute or relative limits, classifi cation with statistics, bar display for calibration of measuring probes, determination of resistivity, and many other functions. The operation of the measuring section of the RESISTOMAT® model 2304, 2305 high-precision inspection and test unit is based on an upgraded 4-wire design.

If you want to protect your products, ensure and document their intact condition and guarantee adequate maintenance – labels are the perfect solution for all of these things. With Förster’s labels you can mark your inventory, protect your brand, protect your copyright and the inviolability of your ideas and products. For all of this, Förster’s labels are the ideal solution. Not just any labels, of course, but those that meet your needs 100%. This can relate to the material, the certification or the printing process. Förster Etiketten offers you everything you need to protect and check your goods and interests.

The D-Tect X-ray inspection software is completely developed by DÜRR NDT and is the perfect complement to all digital X-ray systems like imaging plate scanners and flat panel detectors (DDAs). DICONDE compliant The user can be certain that images can be viewed on any other DICONDE compliant system. All-in-one All functions are included: from image acquisition, image evaluation and report generation to data import and export. High performance GPU and multi-core CPU support makes D-Tect X extremely fast and efficient.

AutoScan Inspec is a fully automatic desktop 3D inspection scanner that innovative integrates highaccuracy 3D scanning and 3D inspection. Featuring intuitive user interface, easy operation and AI intelligent scanning algorithm, AutoScan Inspec offers fully automatic scanning experience with metrologygrade accuracy and fine detail. Designed for scanning small and complex parts, AutoScan Inspec can be applied in inspection and quality control, reverse engineering, product design and etc. Watch the video here.Metrologygrade Accuracy Advanced bluelight 3D scanning technology brings users the scan accuracy within 10μm to ensure high level of accuracy required by quality inspection.

DSMax is the fastest and highest definition laser line 3D displacement sensor on the market for acquiring images and inspecting products in 3D. It is the only sensor that offers: — High scan rates (up to 18 kHz) at full measurement range — Maximum resolution images (2,000 profile points) — Fast high dynamic range (HDR) image These features make it the ideal solution for measuring and inspecting very small parts, such as electronic components, which can contain highly reflective or dark features.