Industrial electrics - Import export

We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm.Pharmaceutical and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.

Eccentric screw pump tube B70V-SR Industrywith reduction gear for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump B70V-SR 12.1 (with reduction gear) in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use

When it comes to sophisticated plastic injection molding, we are completely in our element. We process all common thermoplastics, from standard to high-performance plastics. A fully automated production with handling systems for part removal and QA tests guarantees an economic production of your parts. We also have experience with the overmolding of various inserts such as threaded bushings, electronic contacts, circuit boards and much more. This and much more are the reasons why we are a reliable partner for almost all industries: Automotive industry aerospace industry Mechanical engineering Medical technology Construction industry Electrical engineering Jewelry and watch industry Furniture industry

Electrically conductive wheels and antistatic wheels and castors are used in almost every industrial setting, from medical engineering, electrical and semi-conductor industries to the automotive industry, hospitals, pharmaceuticals and other chemical industrial sectors. These wheels and castors are used everywhere protection against electrostatic discharge is required. Operators and sensitive goods are particularly susceptible to the electrostatic discharge that can be generated by transport units or by transported goods.

Tungsten is a silver-white, metallically shiny or grey heavy metal (depending on whether it occurs in pieces or in powder form). Hard and brittle, tungsten can, however, be made ductile by hammering and drawn into thin wires, for example. Tungsten belongs to the group of refractory metals, which are characterized by high melting points, good thermal conductivity and low thermal expansion, among other things. High corrosion resistance is a further characteristic. Tungsten is suitable for the construction of resistance heating elements, the manufacture of filaments (especially in high-temperature furnace construction and electrical engineering), engine parts, X-ray anodes and welding electrodes. Pins made of tungsten can be fused into high melting point glass for the passage of current. Tungsten is also used in nuclear technology. Tungsten alloys are used about 80% in the steel industry and about 10% each in the hard metal and electrical industries.

For the best only the highest quality ICS-ETFE is used for coating stainless steel process and utility pipework, for example. As a special, flame-resistant interior coating, this is particularily suitable for the coating of exhaust air pipework, for example, in factories in the chip, solar cell and fibre optics industries. ICS is FM-approved – each construction part is marked separately with the FM specification. This coating is also tested according to the American safety standard Factory Mutual Research 4910 and suitable for use in clean rooms. The coatings are used, amongst other things, in the chemical industry, the electrical industry, the automobile industry as well as in the food industry and in semiconductor technology. ETFE coatings are particularly well suited for use in the semiconductor and pharmaceutical industry. ETFE resists the most extreme conditions, such as e.g. the processing of high-purity grade water (molecules can still be extracted by this even from...

• Light emitting seals (Flat seal with integrated circuit, LED and transient voltage suppression); • Light emitting sockets (LED, with integrated seal and screw, transient voltage protection); These light-emitting Staiger seals and sockets are above all suited for assuring operational readiness of new and existing installations The light-emitting seals and sockets immediately signalize malfunctions and their precise location. This is particularly advantageous in valve cascades or similar systems with high packing density. Your system’s operational readiness is considerably improved by using the electronic components fitted with LEDs. This is an effective measure to consistently reduce required maintenance costs and time. Owing to their low height and standardized connections, the light-emitting seals and sockets may also be installed in retrofitting.

TAMPOPRINT pad printing and fully automatic laser machines meet the highest quality requirements when used in multi-shift operation with high throughput speed. Highest precision of the print image registration on convex, round or flat parts by using the pad printing process, one to multicolor, or by using the ALFALAS® laser marking process goes without saying and meets the high standards for these industrial products. Process monitoring by using the latest camera systems will secure your production. We make markings, scales and decorations possible where other processes reach their limits.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes.In our product portfolio for measuring electrostatic charges and leakage resistances you will discover systems and products for many industrial sectors. Electric Field Meter EM03: Handy appliance for the measurement of static charges, measuring distance ranging from 2 to 20 cm. The field strength is converted automatically and displayed in volts. Measuring range from ±0 to ±200 kV, automatic switching between measuring ranges, measured values are displayed on a 2-line alphanumerical LCD display. Dimensions: 114 x 68 x 25 mm (L x W x D)

PET strapping is particularly tear-resistant and elastic at the same time. Thus they reliably absorb shocks during transportation and, depending on width, can sustain loads of between 185 and 580 kg. Our PET strapping is available in widths of 9.5 to 15.5 millimeters with tight fabrication tolerances. After use, it can be easily fed back into the material cycle, since it consists of 100 % recyclabled plastic bottles (bottle flakes). It has a high stability for optimal load security. Its constantly high quality ensures a high machine availability. Most frequent fields of application: • Corrugated cardboard industry • Printing industry • General logistics • Electrical industry (TVs, cooling/heating units, kitchen equipment) • Automotive industry (equipment and spare parts for cars, trucks and bikes)