Guide rollers - Import export

Generally speaking, guide rollers come in two different varieties: guide wheels and running wheels. Guide wheels are used in machines or gates to facilitate linear motion. These wheels are usually put under frequent but brief loads. Running wheels, on the other hand, are designed to withstand constant and consistent loads. They are frequently used in conveyor systems. Blickle provides a total of seven different product series with different polyurethane and nylon treads and steel or nylon wheel centres to suit a wide variety of applications and requirements. We are also an excellent partner if you need an individual customised solution. Please contact your personal adviser to find out more!

Our cross roller guide rails are freely interchangeable standard elements. Our guide rails allow the assembly of extremely rigid and precise linear guides without any play. Benefits Able to carry high loads running extremely smooth require little space long serviceable life Mounting instructions: When mounting the guide rails make sure the bearing surfaces have been machined in a parallel manner and are to the angle. The tolerances of the bearing and mounting surfaces shall conform to the process tolerances of the guide rails (standard quality). The prestress applied depends on the respective mounting conditions, on the rigidity of the assembled slide structure respectively. We recommend to apply a prestress equivalent to a value between 5 and 20 % of the maximum admissible load. However, the load carrying ability of the overall guide rail structure thus realized will, at any case, be reduced by the prestress applied.

Franke FDI linear guides are equipped with vacuum-compatible needle bearings and are made almost entirely of lightweight aluminum. Special design, material and lubricants prevent outgassing in a vacuum. Rail elements can be manufactured in lengths from 200 mm to 4000 mm.

Franke FDG linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications in harsh environments and with reduced demands on load capacity. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDE linear guides are equipped with lubricant-free, high-quality needle bearings and are made almost entirely of lightweight aluminum. They are suitable for linear motion tasks in almost all industries, especially for use in food production or in clean rooms. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly

Franke FDD linear guides are suitable for linear motion tasks in almost all industries. Non-magnetic tracks without influencing the prevailing magnetic fields make them ideal components e.g. in medical technology or in electronics manufacturing. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly

Franke FDC linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. Inlaid raceways made of corrosion-resistant steel make them insensitive to environmental influences as well as moisture or cleaning agents. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDH linear guides are suitable for linear movement tasks, especially in dynamic pick-&-place applications. They have rollers with angular contact ball bearings for the highest acceleration and speed values, for example when using linear motors as the drive source. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDB linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications with reduced demands on load and noise. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDA linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. The sealed roller bearings enable maintenance-free operation over the entire service life. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Rigid machine for heavy duty belt grinding. The machine can be adjusted for horizontal or vertical position. Various options include: Dust extraction, chamfering device, angle guide roller, longitudinal stop.

GUTBROD combination coatings offer a wide range of applications for various industrial requirements and applications such as: - rolls - container - hot plates - painting hangers - mirror jaws - moulds - screws - knives - slide rails - conveyor units - industrial baking tins and trays - contact pressure, control and guide rollers - welding railss

Franke FTB linear tables impress with their compact and robust design. The integrated aluminum roller guide is maintenance-free and protected from dirt by a metal cover. It is driven by a spindle. Franke FTB linear tables are suitable for precise processes in many measuring, testing and positioning applications. They are available in stroke lengths from 100 to 1500mm.

Not only great in the pan A very attractive characteristic of PTFE is its physiological safety. This makes PTFE particularly interesting for use in the area of drinking water and in contact with food. Thus, the famous Teflon®pan is only a small excerpt from an extremely far-reaching and extensive field of application in industry. Everything that has to run smoothly and where no product caking is desirable is a potential application for a PTFE coating. Practical examples - Scraping knife - Baking sheets - Containers - Mandrels - Colour mixers - Pastry form rollers - Tapered valve plugs - Cookie cutting rollers - Guide plates - Glue dispensers - Press plates - Pump pistons - Tyre moulds - Screw conveyors - Dough processing tooling - Funnels - Drying drums - Packaging equipment

The semi automatic sealing device is suited for the sealing of plastic and glass containers. electro-pneumatic, high contact pressure (e.g. for glass sealing) infinitely variable height adjustment aluminium sealing head hollowed out sealing die, adaptable to sealing head container holder roller guide system digital control unit

The semiautomatic sealing device PolySeal Vario PN is suited for the sealing of all sorts of plastic and glass containers. electro-pneumatic stepless pressure regulation sealing head heatig block, swingable, anodised aluminium hollowed out sealing die heat protection shield stabiliser roller guide with running slide container holder, adjustable container holder optional (see picture) VARIOTRONIC - regulation of temperature, sealing time and pressure The sealing device is modularly upgradeable to the PolySeal Vario Twin.

SEAMIAUTOMATIC SEALING DEVICE suitable for the sealing of all sorts of plastic and glass containers. 1. foil application device PolySeal Vario DIS (left hand side) electro-pneumatic stepless pressure regulation stepless manual height adjustment with height scale foil dispensing with 2 spot pre-sealing removable pre-sealing plates heat protection shield vacuum suction nozzle roller guide with running slide foil magazine for stackable pre-cut sealing lids VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure 2. sealing device PolySeal Vario PN (right hand side) electro-pneumatic stepless pressure regulation stepless manual height adjustment with height scale sealing head heating block, swingable, anodised aluminium hollowed out sealing die heat protection shield container holder VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure

SEAMIAUTOMATIC SEALING DEVICE suitable for the sealing of all sorts of plastic and glass containers. 1. foil application device PolySeal Vario DIS (left hand side) • electro-pneumatic • stepless pressure regulation • stepless manual height adjustment with height scale • foil dispensing with 2 spot pre-sealing • removable pre-sealing plates • heat protection shield • vacuum suction nozzle • roller guide with running slide • foil magazine for stackable pre-cut sealing lids • VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure 2. sealing device PolySeal Vario PN (right hand side) • electro-pneumatic • stepless pressure regulation • stepless manual height adjustment with height scale • sealing head heating block, swingable, anodised aluminium • hollowed out sealing die • heat protection shield • container holder • VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure

The semiautomatic sealing device PolySeal Vario PN is suited for the sealing of all sorts of plastic and glass containers. • electro-pneumatic • stepless pressure regulation • sealing head heatig block, swingable, anodised aluminium • hollowed out sealing die • heat protection shield • stabiliser • roller guide with running slide • container holder, adjustable container holder optional (see picture) • VARIOTRONIC - regulation of temperature, sealing time and pressure The sealing device is modularly upgradeable to the PolySeal Vario Twin.

High performance with the new DAMBACH conveyor modules for totes, cartons and trays. With decentralized conveying functions and standardized modules, a wide range of material flows can be mapped easily and quickly. All modules are perfectly matched and can be freely combined. Also thanks to the high level of standardization of individual assemblies. This not only increases flexibility, but also reduces spare parts inventories. The comprehensive container conveyor technology modular system consisting of roller cams, lift converters, infeed and discharge conveyors, accumulating roller conveyors, belt conveyors, lifters and leaves nothing to be desired. Our sales department supports you from the planning phase through layout design to implementation. The robust design with integrated cable ducts and sensors ensures maximum functional reliability. Motor rollers and side guides are easily accessible without time-consuming disassembly of the cover.

The SMA 30-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 8 mm is possible in NE metals and a chamfer width of up to 6mm in steel. In addition to this, a radius processing of 1.2mm to 6mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 30 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles 30°, 45° and 60°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

The SMA 40-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 16 mm is possible in NE metals and a chamfer width of up to 12mm in steel. In addition to this, a radius processing of 1.2mm to 8mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 40 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

The sturdy chamfering machines are designed for chamfering, edge chamfering and welding seam preparation. The machines can process sheet thicknesses from 2-190mm. The machines generate a very good chamfering quality thanks to the optimized interaction between the cutter head, cutting inserts and minimal quantities of lubrication. In NE metals and steel, a chamfer width up to 30mm is possible. The MMB machines have gradual speed regulation, which is very useful when processing aluminum or stainless steel. The angle adjustment can be set gradually in the range of 30° depending on the machine type and design, for example, 25-55°, 30°-60° or 35-65°. The MMB series is equipped with a feed unit by default. The machines can be extended with roller guide ways or converted into automatic chamfering machines. Depending on the design, the machine table is equipped with ball or heavy-duty rollers.

The sturdy and easy-to-use chamfering machine was designed for the deburring and chamfering of small to medium-sized workpieces and bar material starting with a thickness of 1 mm. The machine generates a very good chamfering quality thanks to the optimized interaction between the cutter head and cutting inserts. In NE metals and steel, a chamfer width up to 11mm is possible. The WKF 170 has gradual speed regulation, which is very useful when processing aluminum or stainless steel. The angle adjustment can cover a range from 15-60° in 5° steps. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop, which simultaneously serves as a chip box. The machine can be extended with roller guide ways or converted into an automatic chamfering machine.