Guide rails - Import export

The stop screws are screwed into the thread (option) of the guide rails. An attached rubber cap dampens the stop. For rail lengths with initial hole dimensions below L11 min. we deliver the drilling pattern offset by half a drilling jump.

modular workbench: worktop in beech multiplex 1500x750x40 mm, 2x feet, 1x drawer block with 1x drawer, front height 150mm, drawer with full extension 100%, load capacity 100 kg ball guided rails WxDxH 1500x750x859 mm

Drawer cabinet with 8 drawers, 8x 100 mm, drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device, WxDxH 705x736x919 mm

Drawer cabinet with 7 drawers 7x 100 mm drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x819 mm

Drawer cabinet with 7 drawers 7x 100 mm drawers drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 450 x 600 mm ball guided rails anti-tilt device WxDxH 555x736x819 mm

Drawer cabinet with 5 drawers 2x100, 2x150, 1x200mm drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 450 x 600 mm ball guided rails anti-tilt device WxDxH 555x736x819 mm

Drawer cabinet with 6 drawers 2x75, 1x100, 2x125, 1x200mm drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 450 x 600 mm ball guided rails anti-tilt device WxDxH 555x736x819 mm

Drawer cabinet with 5 drawers 2x 100, 2x 150, 1x 200 mm drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x819 mm

Drawer cabinet with 7 drawers 1x75, 2x100,1x 125, 2x150,1x200 mm drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x1019 mm

Drawer cabinet with 6 drawers 1x 50, 3x 100, 1x 150, 1x 200 mm drawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x819 mm

Drawer cabinet with 6 drawers, 1 x 50, 1 x 100, 3 x 150, 1 x 200 mm drawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x919 mm

Drawer cabinet with 9 drawers 2x 50, 2x 75, 2x 100, 3x 150 mm drawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x1019 mm

Drawer cabinet with 8 drawers front 2x 50, 3x 100, 2x 150, 1x 200 mm drawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 900 x 600 mm ball guided rails anti-tilt device WxDxH 1005x736x1019 mm

Drawer cabinet T736 R 36-24 with 7 drawers, 1 x 50, 2 x 100, 3 x 150, 1 x200 mmdrawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 900 x 600 mm ball guided rails anti-tilt device, WxDxH 1005x736x1019 mm

Drawer cabinet with 6 drawers 1x 50, 3x 100, 1x 150, 1x 200mm drawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 450 x 600 mm ball guided rails anti-tilt device WxDxH 555x736x819 mm

Our cross roller guide rails are freely interchangeable standard elements. Our guide rails allow the assembly of extremely rigid and precise linear guides without any play. Benefits Able to carry high loads running extremely smooth require little space long serviceable life Mounting instructions: When mounting the guide rails make sure the bearing surfaces have been machined in a parallel manner and are to the angle. The tolerances of the bearing and mounting surfaces shall conform to the process tolerances of the guide rails (standard quality). The prestress applied depends on the respective mounting conditions, on the rigidity of the assembled slide structure respectively. We recommend to apply a prestress equivalent to a value between 5 and 20 % of the maximum admissible load. However, the load carrying ability of the overall guide rail structure thus realized will, at any case, be reduced by the prestress applied.

Franke FDC linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. Inlaid raceways made of corrosion-resistant steel make them insensitive to environmental influences as well as moisture or cleaning agents. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDH linear guides are suitable for linear movement tasks, especially in dynamic pick-&-place applications. They have rollers with angular contact ball bearings for the highest acceleration and speed values, for example when using linear motors as the drive source. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDE linear guides are equipped with lubricant-free, high-quality needle bearings and are made almost entirely of lightweight aluminum. They are suitable for linear motion tasks in almost all industries, especially for use in food production or in clean rooms. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDD linear guides are suitable for linear motion tasks in almost all industries. Non-magnetic tracks without influencing the prevailing magnetic fields make them ideal components e.g. in medical technology or in electronics manufacturing. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDB linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications with reduced demands on load capacity. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDA linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. The sealed roller bearings enable maintenance-free operation over the entire service life. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly

Franke FDI linear guides are equipped with vacuum-compatible needle bearings and are made almost entirely of lightweight aluminum. Special design, material and lubricants prevent outgassing in a vacuum. Rail elements can be manufactured in lengths from 200 mm to 4000 mm.

Franke FDH linear guides are suitable for linear movement tasks, especially in dynamic pick-&-place applications. They have rollers with angular contact ball bearings for the highest acceleration and speed values, for example when using linear motors as the drive source. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDG linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications in harsh environments and with reduced demands on load capacity. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDE linear guides are equipped with lubricant-free, high-quality needle bearings and are made almost entirely of lightweight aluminum. They are suitable for linear motion tasks in almost all industries, especially for use in food production or in clean rooms. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly

Franke FDD linear guides are suitable for linear motion tasks in almost all industries. Non-magnetic tracks without influencing the prevailing magnetic fields make them ideal components e.g. in medical technology or in electronics manufacturing. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly

Franke FDB linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications with reduced demands on load and noise. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDG linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications in harsh environments and with reduced demands on load capacity. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.