Results for
Germany
Read head for magnetic tape scale SL710/720/730 Pl101-R/RH: 1Vpp interface PL101-RA/RHA: TTL line driver interface (RS422) PL101-RM/RHM/RP/RHP/RY/RHY: with serial interface from Mitsubishi (M), Panasonic (P) or Yaskawa (Y) Max. Response speed: 6.4m/s with 1Vpp Max. Resolution: 0.2µm with TTL (phase to phase) Easy installation Protection class: IP67 (RH version), IP50 (R version) Resistant to oil, dirt, vibration and shock
Request for a quoteGermany
Exposed linear encoder ( magnetic tape) for resolutions up to 5µm. Very easy installation by clamping or gluing with large mounting tolerances. Perfectly suited for simple length measurement in a wide range of applications. Measuring lengths: 200mm - 30m Accuracy: +/-(25+5L/1.000)µm; L= measuring length Graduation period: 5mm Recommended for resolutions up to 5µm Compatible with PL20C, PL25-3 and PL81/PL82 read heads (sold separately) SL110: open length measuring system in aluminum profile for clamp-on mounting SL130: open length measuring system as tape for sticking on Simple mounting Extremely robust position measuring system for large measuring ranges
Request for a quoteGermany
Incremental length probe with magnetic detection principle. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines
Request for a quoteGermany
Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.
Request for a quoteGermany
The BS78 is a high accuracy exposed linera encoder with an interferometric signal generation in transmitted light design. The scale has a graduation period of 0.55µm. The LASERSCALE operating principle generates a sinusoidal measuring signal with a signal period of 138nm. This has an extremely high signal quality with a very low noise component. This allows resolutions of up to 2.1 pm to be generated. Due to the extremely low interpolation error, the BS78 is perfectly suited for ultra precision machining, measurement and calibration applications.
Request for a quoteGermany
High accuarcy incremental length probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines
Request for a quoteGermany
Absolute operating principle with magnetic signal sensing via two read heads. Extremely insensitive to oil, moisture and dust due to magnetic signal sensing. Large inner diameters of 96mm or 180mm. High accuracy and resolution. Perfectly suited for applications in CNC machine tools e.g. swivel heads or rotary tables.With various serial interfaces available
Request for a quoteGermany
Incremental linear encoder for manual machine tools or measuring applications with counter display. Magetic detection principle makes it extremely insensitive against contamination such as oil, water and dust. Wide tolerances for easy installation For connection to LG20 and LH70 series position indicators
Request for a quoteGermany
The BL50H is a high resolution exposed linear encoder in reflective design. The BL50H has a grating period of 1.6µm and generates a signal period of 400nm with the Laserscale operating principle. The extremely small dimensions, made possible by the reflective design and large mounting tolerances, allow easy integration into X/Y stages and a wide variety of measurement applications. It provides a very high signal quality with low noise level and is suitable for resolutions up to 6pm at travel speeds up to 3m/s.
Request for a quoteGermany
Incremental linear encoder for manual machine tools or measuring applications with counter display. Magetic detection principle makes it extremely insensitive against contamination such as oil, water and dust. Wide tolerances for easy installation For connection to LG20 and LH70 series position indicators
Request for a quoteGermany
Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines
Request for a quoteGermany
The BH25 is a high resolution exposed linear encoder with interferometric measurement signal generation. The BH25 scale has a graduation period of 1µm. The interferometric laser scale principle generates a sinusoidal measurement signal with a signal period of 250nm in the read head. The BH25 is characterized by its small size and high signal quality. It is suitable for resolutions of up to 3.8pm. Due to the reflective scanning and the small design it is perfectly suited for high accuracy X/Y stages with linear motor drive as well as for measurement applications
Request for a quoteGermany
For connection of up to three DK probes with adapter cable CE29 or linear encoder. Equipped with RS-232C function as standard Peak value function, hold function Various input functions especially for automatic measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function
Request for a quoteGermany
Counter display for connection of up to two DK probes with adapter cable CE29. Various data outputs can be made possible by installing expansion cards BCD output with LZ71-B card (optional) Comparator function: relay / open collector output with LZ71-KR (optional) Peak value acquisition / hold function Various input functions especially for automated measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function Flicker control
Request for a quoteGermany
Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.
Request for a quoteGermany
Interferometric angle measuring system, non-contact, open design for resolutions of up to 1.5nrad. The BH20 angle measuring system in open non-contact design is based on interferometric signal scanning. It offers extremely high resolutions and repeatability. The interferometric scanning produces an extremely high signal quality with extremely low noise.
Request for a quoteGermany
Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
High-precision angle measuring system with +/-0.1s accuracy for measuring and calibration applications. The signal sampling is done by an interferometric operating principle (laserscale) The graduation period is 1µm, the generated signal period of the output signal is 250nm. Scale errors are self-compensated by using six reading heads in a special arrangement. The measured values can be output in csv format via the USB interface. The software for measured value acquisition and storage is included in the scope of delivery.
Request for a quoteGermany
High-precision absolute angle encoder with flat design with integral bearing Magnetic operating principle therefore extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables Serial interfaces for Siemens and Fanuc. Siemens version with Functional Safety certification.
Request for a quoteGermany
Absolute exposed linear encoder for CNC machine tools with Siemens (DRIVE-CLIQ) , Fanuc and Mitsubishi CNC. Due to the magnetic operating principle of the SQ47, the measuring system is extremely insensitive to contamination, e.g. oil, water and dust, while at the same time providing maximum accuracy and resolution. Contactless read head design without ball bearing guide Measuring lengths: 90mm - 3.740mm Accuracy: 3+3ML/1,000 µm(p-p) Max. Resolution: 5nm Max. Response speed: 200m/min Protection class: IP67 without supplied air Interface: Siemens DriveCliQ, Fanuc, Mitsubshi Thermal expansion like steel Easy installation
Request for a quoteGermany
Highly accurate magnetic absolute linear encoder with slim design for machine tools with Siemens, Fanuc, and Mitsubishi CNCs Easy integration in cramped installation conditions due to the slim design Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron. Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DRIVE-CLIQ version is Functional Safety certified
Request for a quoteGermany
High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines
Request for a quoteGermany
High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines
Request for a quoteGermany
Highly accurate absolute angle measuring system with flat design and integrated bearing. Magnetic operating principle therefore extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables. With serial interfaces for Fanuc, Mitsubishi and Yaskawa CNC available.
Request for a quoteGermany
1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function
Request for a quoteGermany
High resolution magnetic absolute linear encoder system for CNC machine tools with robust design. The read head is guided contactless without ball bearing Measuring lengths: 70mm - 3.770mm Accuracy: 3+3ML/1.000 µm(p-p) Max. Resolution: 5nm Max. Response speed: 200m/min Extremely robust against vibration and shock Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron machine bed Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DriveCliQ version is Functional Safety certified
Request for a quoteGermany
Exposed incremental linear encoder with magnetic grating. Compact tape scale with high accuracy and integrated reference mark. Non-contact magnetic detection principle Magnetic principle with exceptional resistance to oil, dust, vibration and shock. Effective length from 50 mm to 100,000 mm Output signal with PL101 read head series: 1Vpp /TTL/Serial Yaskawa/Serial Panasonic/Serial Mitsubishi Three versions with different reference point specifications are available
Request for a quoteGermany
Robust and highly accurate incremental probes with magnetic operating principle and USB interface for easy evaluation. The gauges are available with the following measuring ranges: 10mm / 25mm / 50mm / 100mm. Extremely insensitive to contamination such as oil mist, moisture and dust. Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring fixtures, assembly and manufacturing plants. A simple evaluation software for the USB interface is included.
Request for a quoteGermany
1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function
Request for a quoteResults for
Gears for measuring and precision instruments - Import exportNumber of results
39 ProductsCompany type