French fries - Import export

Optigrun Protection and Drainage Board FKD 60BU under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5Under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5 Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

S Styrofoam chips must be stored in warehouses and occupy valuable storage areas. FLOETER offers the economically and ecologically correct solution here: Compact air cushion rolls are easy to process, space-saving and recyclable. Wrapped in the right air cushion-type film, your goods are economically and effectively protected. Positive impact for the environment - with air cushions With the innovative air cushion systems from FLOETER, your employees can be sure that they are doing something good for the environment. The FLOETER air cushion systems meet the required legal standards and regulations. In addition, FLOETER is certified according to ISO 9001: 2015 and applies the environmental management system according to DIN EN ISO 14001: 2015.

The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH16 has many feature on the followings..... Idle running proof structure adopted. No blowing without touching the work piece by the chisel. Vibration on operation is reduced by low vibration structure. Especially effective on continuous operation. Easy to handle, compact lightweight type and weight only one kilogram

The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH16 has many feature on the followings..... Idle running proof structure adopted. No blowing 　　 　 without touching the work piece by the chisel. Vibration on operation is reduced by low vibration 　 　 structure. Especially effective on continuous 　 　 　 　 operation. Easy to handle, compact 　 lightweight type and weight 　 only one kilogram.

RAFI Eltec has over 20 years of experience in the special technology chip-on-board. That gives us a profound understanding of processes and quality in the standard technologies and beyond. As a result, we meet your requirements for flexible and reliable implementation of technically sophisticated solutions. We even set new standards. CHIP-ON-BOARD TECHNOLOGIES • Chip-on-board bonding • Chip-on-chip bonding • Chip-on-flex bonding • Flip chip TECHNOLOGIES IN THE CLEAN ROOM • Die bonding • Wire bonding (aluminum wire bonding and gold wire wedge-wedge bonding) • Glob top casting • Optical casting • Application of HF seals

High-quality waste products (By-products) from our plywood production! With our extensive range of waste products, you can conserve resources while benefiting from high-quality wood materials. Birch-chips

The PP1 chips collector is used for the rapid collection of shavings and other metal parts, for cleaning the workplace, the machine or for the collection of metal parts from waste or ash. The collected metal parts can be removed by pulling the rear release button. Magnets for surface and railing cleaning clean halls and outdoor areas from magnetic parts and thus protect personnel and equipment

Inspired by customer inquiries, SEPA EUROPE has developed a new, modular assembly for the efficient cooling of chips. The core component is a SEPA axial fan that is mounted on a 40 mm pure aluminium heat sink – a so-called Kühligel®. It is equipped with a finger guard and a double-sided adhesive heat pad for screwless mounting on the housing or inside the device. Thanks to the compact design, the light weight and the screwless mounting, this assembly enables accurate positioning and thus effective cooling of the hot spot. The chip cooler HXB40FGK is equipped with a high precision ball bearing and can be used at ambient temperatures between -10 and +85 °C thus opening up a wide range of application possibilities. A further advantage is the long service life of the fan with 350 000 h (MTBF) at 40°C. The chip cooler assembly HXB40FGK is supplied as a standard component. It can however, be customized.

MAXIMUM AUTOMATION Your wish: highest automation in chip management with highest medium purity and availability? Your product: combistream CS4. As a full flow filtration solution, combistream CS4 permanently provides both the low-pressure and the high-pressure system with up to 30 μm pure coolant.

Chip cooling with the aid of heat sinks usually requires a lot of space and is not only heavy but also expensive. The specialists at SEPA EUROPE have developed a chip cooler with minimum space requirements for compact designs. The core component of the compact cooler is the ultra-flat blower HY40H that is combined with a Kühligel® of pure aluminium. The special feature of the new cooling solution is its variability which means that the size and shape of the heat sink can be freely chosen. Users can thus assemble the cooler to optimally fulfil their requirements. With a thermal resistance of a mere 2.5 K/W, the new chip cooler withstands a power dissipation of up to 15 W and in doing so guarantees the operational safety of the entire embedded system. The blower is equipped with the highly durable Magfix® sleeve bearing and has an impressive service life expectancy of von 210 000 h (MTBF) at 40 °C.

The new super flat active chip cooler of the cooling specialist SEPA EUROPE is a convincing solution for applications in the embedded computing sector, in particular for single board computers. The HZ25B05 with its dimensions of 25x25x6.5 mm can be installed even in flat applications and ensures highly effective heat dissipation. The size of this super flat design is not its only advantage, but also its exceptionally low noise level. The heat sink is made of high-purity aluminium and has low thermal resistance. The integrated micro fan is also equipped with a special, highly durable MagFix® sleeve bearing designed for operating temperatures of up to 80°C. Particularly noteworthy is the fact that the micro fan which is operated with a voltage of 5VDC, has a power input of only 0.3 W and a life expectancy of 400000 hours. The fan can also be equipped, if necessary, with a tacho output for monitoring the function. Both and the fan and the heat sink are available separately.

SEPA EUROPE offers a 40 mm frameless fan especially for embedded systems. It is 10 mm high and provides a compact solution for chip cooling when used in combination with the appropriate heat sink. In addition to the 50 mm frameless fan which is already on the market, the new round 40 mm fan is also a much sought-after model for embedded systems. This is because many standard cooling solutions in this business sector are based on the 40 x 10 mm fan. Strictly speaking, the 40 mm fan has a rotor diameter of 37 mm. The version offered by SEPA EUROPE is equipped with two ball bearings and can boast a remarkable service life of 70.000 h at a temperature of 40°C. In addition to an impulse output for speed monitoring, it also has a PWM input for speed setting in the range of approx. 35 – 100% of the nominal speed. In conjunction with the power block pin-fin heat sink, this virtually silent fan with 22 dB(A) is also available ready for connection in the „Kühligel“ version.

Package Quantity : 12 x 240g Artikel Nr: 41301 Grams: 240g

RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. At RAFI Eltec, we test the quality of our products across all manufacturing processes. By performing individual tests and integrating fully automatic tests in combined assembly and testing lines, we achieve targeted and effective test cost reductions. For this purpose, we insist on the most cutting-edge technologies and high-quality equipment. Testing technologies - Pull test for chip-on-board - Automatic optical inspection - Flying probe - In-circuit test - Boundary scan test - Function test - Burn-in test and run-in test - Temperature shock test - Temperature humidity test You can rely on support from the right contact partner for you – whether you are approaching us for the first time or during the production process. We expertly answer all your questions.

Cost-effectively process and machine wood, composites and aluminium: We provide series production angle heads for drilling, milling, sawing and grinding in addition to other units for special applications. Benz units are available in a variety of performance classes, making them ideal for everything from light machining to high-performance continuous operation. We have the solution for your special applications: Customized Benz units for machining centers. Put us to the test!

Allround router with quiet operation for machining of composite materials such as CFRP and GFRP in the diameter range Ø 0.20 to 6.00 mm. Advantages: Good surface, no delamination and fiber projections, low vibration, ideal for trimming, especially for dry machining suitable (low heat) For advanced materials such as carbon, carbon fiber, glass fiber (fiberglass) with multidirectional and unidirectional fiber orientation Roughing and finishing tools with and without diamond coating. Pulling, pushing (cutting pressure up / down, right twistes / left twisted, right hand cutting / left hand cutting)

Allround router with quiet operation for machining of composite materials such as CFRP and GFRP in the diameter range Ø 0.20 to 6.00 mm. Advantages: Good surface, no delamination and fiber projections, low vibration, ideal for trimming, especially for dry machining suitable (low heat) For advanced materials such as carbon, carbon fiber, glass fiber (fiberglass) with multidirectional and unidirectional fiber orientation Roughing and finishing tools with and without diamond coating. Pulling, pushing (cutting pressure up / down, right twistes / left twisted, right hand cutting / left hand cutting)