Electronic controllers - Import export

Reach for the stars! The innovative adjusting knob DKE01 combines a programmable electronic position indicator with a star grip or disk handwheel to offer a flexibly usable positioning unit. The indicated values can be configured application-specifically to cover the most varied areas of use with always the same basic device. Turning knob with integrated 5-digit LCD display. Digit height approx. 11,5 mm. Freely programmable via the ProToolDE programming software. Usable for length or angle measurement. Shaft accommodation: max. Ø 20 mm. Long battery life. With disk handwheel as an option.

freely programmable Profile DKE01: Turning knob with integrated 5-digit LCD display Digit height approx. 11,5 mm Freely programmable display values Usable for length or angle measurement Shaft accommodation: max. Ø 20 mm Long battery life with disk handwheel as an option

17 901 105 55000 rpm..; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Avaliable as a set: motor, electronic, foot control, deposit

Rapid developments in the fields of control engineering and in microprocessor and semiconductor technology have resulted in the widespread use of electronically controlled systems in every branch of industry today. This has created a need for sensors that are inexpensive but, at the same time, sufficiently robust, both electrically and mechanically, to withstand a wide range of temperatures (e.g. from -40 to +160 degrees centigrade), particularly in applications involving large quantities, such as the automobile industry. Fig. 1 provides a summary of the various types of sensors for angular and linear motion that are in use today. This paper is concerned with quality criteria (1) and (2) applicable to conductive-plastic potentiometers for use as sensors for angular and linear motion. Such potentiometers essentially comprise the following components: 1. The resistance element (support material + a resistance track of conductive plastic) 2. A wiper (precious metal alloy) 3. A...

Description 17 901 104 35000 rpm.; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Available as a set: motor, elektronic, foot control, deposit 17 901 105 55000 rpm..; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Avaliable as a set: motor, electronic, foot control, deposit 17 901 103 Control unit for MP35 continous speed regulation, direction of rotation right/ left. regulation with control unit or foot control 17 901 107 Control unit for MP55 continous speed regulation, direction of rotation right/left. regulation with control unit or foot control. 17 901 106 Foot pedal for MP35 and MP55 Continous speed regulation; with connecting cable 17 901 108 Motor deposit for MP35 and MP55

17 901 104 35000 rpm.; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Available as a set: motor, elektronic, foot control, deposit

max. size 46 x 64 cm age 1985 single sheet feeder conventional dampening electron. double sheet control dry sprayer Delivery time: immediatelly from stock Ref: HE240001A Please ask for price. We ship and install worldwide!

Professional internet power outlet strip can be used worldwide to control, measure and monitor electrical appliances via Ethernet (LAN). Integrated web server enables OS-independent operation with a web browser (PC, notebook, tablet, smartphone). Username and password required for access control. 2 independent switchable circuits can handle 16 A. Intelligent electronic control system optimises operation at high starting currents and extends the life of your appliances. Switching states can be changed and displayed individually on the device itself. Adjustable default switching state: Off, On, last active state. Integrated time control using flexibly programmable, time dependent rules: outlets 1 and/or 2, switch on or off, select days or specific date, time (hour and minutes). Automatic clock synchronisation (NTP) and changeover to daylight savings time/standard time. Professional power measurement at On/Off 1 (Master) outlet: measures active power and energy consumption, with...

Professional internet power outlet strip can be used worldwide to control, measure and monitor electrical appliances via Ethernet (LAN). Integrated web server enables OS-independent operation with a web browser (PC, notebook, tablet, smartphone). Username and password required for access control. 2 independent switchable circuits can handle 16 A. Intelligent electronic control system optimises operation at high starting currents and extends the life of your appliances. Switching states can be changed and displayed individually on the device itself. Adjustable default switching state: Off, On, last active state. Integrated time control using flexibly programmable, time dependent rules: outlets 1 and/or 2, switch on or off, select days or specific date, time (hour and minutes). Automatic clock synchronisation (NTP) and changeover to daylight savings time/standard time. Professional power measurement at On/Off 1 (Master) outlet: measures active power and energy consumption, with...

The Valve-Tronic Plus™ is designed for use in highly demanding industrial applications that require accurate flow control and measurement. It can function as a stand-alone controller for basic applications or become an integral part of a process control system for automatic flow control. FEATURES • Large LCD displays actual flow rate, totalized flow, valve position, alarms, and diagnostic messages • Field programmable engineering units • Magnetic sensor technology immune to problems related with dirty oil • Configurable to control based on rate of flow or valve position for applications where the Process Variable (PV) is Dew-point, Carbon Potential, etc. • Standard Modbus TCP for easy integration with control systems • Manual actuation of value possible • Field calibration for null and span • Advanced polynomial calibration for high accuracy over the entire range of the meter • Built-in Web Server with remote access to device • Full PID setpoint control The VALVE-TRONIC Plus™...

The Liquid FurnaceMeter™ is available for liquid flow measurement. These meters are fitted with integrated motorized flow control valves specifically designed for the liquid type, inlet pressures, and scale ranges to provide precision process control for most applications. The Liquid FurnaceMeter™ provides a retrofit foot print to most variable area meters to minimize piping changed when upgrading to differential pressure technology and in-situ calibration capabilities. The Liquid FurnaceMeter™ represents a full range of precision flow measurement instruments utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The advanced calibration and display modules on the electronic versions include integrated flow rate alarm and flow consumption totalizing functions. The Liquid...

The FurnaceMeter™ is available for gas flow measurement. These meters are fitted with integrated motorized flow control valves specifically designed for the gas type, inlet pressures, and scale ranges to provide precision process control for most applications. The FurnaceMeter™ provides a retrofit foot print to most variable area meters to minimize piping changed when upgrading to differential pressure technology and in-situ calibration capabilities. The FurnaceMeter™ represents a full range of precision flow measurement instruments utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The advanced calibration and display modules on the electronic versions include integrated flow rate alarm and flow consumption totalizing functions. The FurnaceMeter™ meets current NFPA86...

The VersaMeter™ is designed to fit direction into a pipeline assembly and can provide either local or remote display options. The VersaMeter™ represents a full range of precision flow measurement instruments and accessories utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The advanced calibration and display modules on the electronic versions include integrated flow rate alarm and flow consumption totalizing functions. The VersaMeter™ meets current NFPA86 guidelines for safe usage in the thermal processing industry. In addition, every VersaMeter™ comes complete with a 10point calibration curve traceable to a NIST transfer standard. The meters can also be field calibrated to meet CQI-9, ISO, NADCAP and QS quality audit systems. The VersaMeter™ product line comes in...

The SAV Plus™ is a heavy-duty position control valve that maintains a valve's position based on a desired % output set point. It is designed to work in applications where the control of a process variable (PV) is accomplished using an independent sensor. Perfect for controlling Dew-point, Carbon Potential, etc. The SAV Plus™ incorporates a standard Waukee Flo-Meter scaled to the application requirements and an electronic control valve that modulates flow based on an external signal from a control system. The external signal can be 4-20mA or may be delivered using digital communications. FEATURES • Large LCD display provides vital information such as Valve position, Alarms, and diagnostic messages • Simple and intuitive programming menus • Field programmable engineering units • Standard Modbus TCP for easy integration with control systems • Manual actuation of valve possible • Built-in Web Server for remote access to device • Calibration in state-of-art ISO/IEC 17025:2005...

Application: Solenoid valve system for automatic monitoring the leaks of water supply pipes and tubes. To be used in household and laboratory equipment. Installation Fully automatic monitoring can be built in to the supply pipes of a water source. The sensor lays on the floor and is connected with the control electronics through a cable. The solenoid coil and control electronics are built in to a plastic housing. The voltage supply occurs over a network cable with an adapter connector. Function: Upon energizing, the control electronics opens the solenoid valve. The sensor can monitor a water film of approximately 0.5 mm and sends a signal to the electronics. The solenoid valve is closed and an audible alarm signal is triggered. This condition will be reset by interrupting the power supply. • Normal widths from DN10 to DN50 • Fittings G1/2 to G2 • Piezo alarm system • LED indicator of operation • Drinking water admittance on enquiry

• Orifice (DN): 0.6 mm • Pressure range: 0.5 – 10 bar • Operating voltage: 6 VDC • Power consumption: max. 1.4 W • Degree of protection: IP65 Staiger pilot valves are used in order to operate non-contact water taps in energy-saving mode. These valves fitted with microbatteries operate only after being actuated by an electrical impulse. This impulse is triggered by moving your hand in front of the sensor, which triggers the extremely robust pilot valve. After water has been dispensed, the valve returns to its inoperative position. This valve is characterized by robustness, durability and small size. Benefit The low power consumption by the impulse control is ideally suited for use in electronically controlled taps with battery operation. The valve is constructed entirely of water-approved materials and is certified according to KTW, W270, WRAS, ACS and NSF 61.

Each passport contains an alphanumeric code for unique identification. The electronically controlled, servomotor-driven random numbering system LENservoP has been especially designed for the imprint of those independent sequences of numbers and letters. - High flexibility as a result of a maximum of 11 motorized wheels instead of 7 - Easy integration into passport machine due to unique design - Suitable for hot-foil applications

• Heat-weld sealing unit in standard-3 version • Wear-free DC drive, brushless motor technology • Easy strap coil change and threading system • Soft strapping with open sliding position for sensitive packages • Adjustable strap tension via potentiometer • Energy-saving drives • Electronic controls • Hinged table top made of stainless steel • 4 castors of which 2 are lockable • Strap feed from sealing head level via potentiometer • Quiet sealing unit • Package width min. 80 mm • CE marking inclusive conformity declaration

Positioning system with protection class IP 68 for hygienic applications The PSW 31x/33x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up.

Positioning system with protection class IP 65 for damp area applications The PSS 30x/32x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up.

Positioning system with protection class IP 65 for hygienic applications The PSS 31x/33x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up.

The ENCODER machine series was specifically developed for integration in all kinds of automated systems. Variable control possibilities: For the EP series we offer three different electronic control possibilities. Variable installation positions: The ENCODER EP/1 models, equipped with a piston on the ink/ doctoring cup and adequate overhead control, guarantee all print positions. Fitted with the ENCODER aluminium stand, the ENCODER EP/1 have a free choice of positioning within 360° and the distance to the printing component can be additionally adjusted with a handwheel.

• Heat-weld sealing unit in standard-3 version • Wear-free DC drive, brushless motor technology • Strap end detection with ejection of remaining strap • Easy strap coil change and threading system • Soft strapping selectable for sensitive packages • Low-wear, controlled strap path system • Adjustable strap tension via potentiometer • Energy-saving drives • Electronic control • Hinged front table top • Sturdy foot pedal for cycle start • 4 castors of which 2 are lockable • Table top length 600 mm or alternatively 700 mm or 800 mm • CE marking inclusive conformity declaration

Positioning system with protection class IP 68 for damp area applications for wet area applications The PSW 30x/32x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up.

The PSE 34x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link).

The PSE 31x/33x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link).

The PSE 30x/32x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link).

The green line™ series has been specially developed as an energy efficient series of solenoid valves. For this reason directlycontrolled standard valves from müller coax have been paired with completely new, patented control electronics.