Electrical drives - Import export

Muscular and skeletal problems are the most common reasons for people being unable to work, particularly if they have a job that frequently involves physically strenuous activity like pushing and pulling loads. The electric drive systems of the Blickle ErgoMove® series reduce these health risks considerably. The effort required for pulling and pushing is reduced by up to 100 %. The physical strain on the operator is decreased during internal material transport due to the considerably lower amount of effort required compared with manual operation. Equipment and transport units of any kind can be quickly and easily upgraded with a “plug & play” electric drive, steering and braking assistance. The modular sets include two fixed castors with electric drive, cockpit solutions with integrated controls and battery unit as well as all relevant safety features.

The Pump Set is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suited for the withdrawal or decanting of solvents. * Media examples: Ethanol, petrol, butanol, isopropanol, kerosene, methanol and petroleum.etc. * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

age 1995 2 drilling heads sliding table electr. drive electr. foot switch underframe Ref: NA220154A Please ask for price. We ship and install worldwide!

age unknown wire stitching machine 1 sttiching head electr. drive incl. substructure Ref: GR230210A Please ask for price. We ship and install worldwide!

age 1985 7 drilling heads adjustable drilling head distance incl. substructure electr. drive electr. foot switch Delivery time: immediately from stock Ref: HA200365A Please ask for price. We ship and install worldwide!

age 1990 stapling machine 2 stitching heads electr. drive electr. foot switch incl. substructure Delivery time: immediately from stock Ref: NA230338A Please ask for price. We ship and install worldwide!

width 60 cm age 1978 laminating machine electr. drive Ref: TR240096A Please ask for price. We ship and install worldwide!

age 1992 Book back nipping press electr. drive hydraulic pressing Ref: GA240098A Please ask for price. We ship and install worldwide!

age 1990 paper driller 2 drilling heads sliding table electr. drive incl. substructure Ref: NA230337A Please ask for price. We ship and install worldwide!

age 1980 eyeletting machine electr. drive underframe Delivery time: immediatelly from stock Ref: HA230214A Please ask for price. We ship and install worldwide!

age 1995 4 drilling heads with automatic table move variable drill speed drill-underlay with cardboard electr. drive electr. foot switch incl. substructure Delivery time: immediatelly from stock Ref: HA230223A Please ask for price. We ship and install worldwide!

age 2000 table model 2 drilling heads electr. drive manual handle slide plate Delivery time: immediately from stock Ref: NA200211A Please ask for price. We ship and install worldwide!

age 1965 wire stitching machine 1 sttiching head electr. drive incl. substructure Delivery time: immediately Ref: GR230359A Please ask for price. We ship and install worldwide!

width 68 cm age 1963 scoring and perforating machine electr. drive food switch incl. substructure Delivery time: immediatelly from stock Ref: BI230336A Please ask for price. We ship and install worldwide!

width 70 cm age 1963 scoring and perforating machine electr. drive incl. substructure food switch Delivery time: immediately Ref: PE230361A Please ask for price. We ship and install worldwide!

age 1960 wire stitching machine 1 sttiching head electr. drive food switch incl. substructure Delivery time: immediately from stock Ref: HO230121A Please ask for price. We ship and install worldwide!

age 2001 forklift high-lift truck electr. drive load capacity 1.000 kg 1.600 mm length of stroke Delivery time: shortly Ref: YA230070A Please ask for price. We ship and install worldwide!

age 1993 semi automatic hot stamping machine stamping area max. 125 x 280 mm electr. drive 1 foil feeder 1 heating plate automatic feeding unwinding system for round material / cans underframe Delivery time: immediately from stock Ref: GI200261A Please ask for price. We ship and install worldwide!

These are flexible shafts with cylindrical pin or thread to connect to: Drilling machines, pneumatic motors, lathes, cutters, straight grinders, angle grinders, other electric- or pneumatic driving units

Settling and floating layers are avoided by horizontal and vertical mixing. Before plant construction, coordination takes place with the future plant operator to determine the optimum stirring technology based on the respective substrates. Operational safety is ensured by the closed reaction chamber, the external drive for the agitator and the externally mounted electric drives. Variable dimensions and substrate flexible stirring technology also allow the use of difficult substrates. The wall heating system, externally mounted on the fermenter wall, ensures optimum fermentation conditions and a high gas yield. FAST ASSEMBLY – LESS COST Low installation costs are possible by using the Lipp dual seam system and on site production. If the foundation slab is provided along with assistance during assembly, costs fall still further.

Compact and powerful single phase two-value capacitor motor. Light and convenient Quiet and durable With motor protection switch, connection cable and plug Quick motor assembly/disassembly by Lutz hand wheel Type of drive: Electric Explosion Protection: not explosion-proof

Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of caustic solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid, etc. * Pumping unit equipped with Lutz Original handwheel * suitable for filling or transferring oils such as rapeseed oil and vegetable oil Features & Advantages * optionally with electric or compressed air drive * no lubricants and therefore no contamination of the pumped medium by lubricants * optimized barrel emptying * universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump can be replaced

The pump set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of alkaline solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid etc. acetic acid etc. * Pump unit equipped with Lutz original handwheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & benefits * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants lubricants * Optimised drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to vertical Drum Pumps. Perfectly suited for the removal of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection on the bottom run of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of the medium when disconnected * Easy installation * Easy to dismantle * Low space requirement * Automatic emergency stop function of the engine in case of leakage detection * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available with Ex - plug * Pump tube equipped with Lutz original handwheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * Approved according to ATEX directive 2014/34/EU, category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative to vertical drum pumps. Depending on the application, various motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Horizontal connection at the bottom of the container * Also for alcoholic foodstuffs, cosmetics and pharmaceutical products as well as flammable cleaning agents * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Food-safe connections * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2 * Approved according to FDA and Regulation (EC) 1935/2004 The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection

This high precision torque sensor is designed for both static and dynamic measurements on non-rotating applications. It is particularly suitable for torque measurements on, for instance, extremely small electrical actuating drives and micro-mechanical actuator elements, or for measuring reaction torques e.g. on micro-motors. The high accuracy of measurement also makes this sensor ideal for use as a reference in many fields of industrial manufacture as well as laboratory research and development projects. Not containing any rotating parts, it requires no maintenance if properly used. The strain-gage based sensor’s modular design allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ±10 V that is proportional to the torque. The sensor can be configured via the micro-USB interface, providing access to, for example, a filter frequency setting, averaging, and a tare function.