Drains - Import export

Application in electro enclosures. Features: - Continuous ventilation and drainage of the enclosure - Pressure equalization between enclosure and outer atmosphere - Reduces condensation - Polyamide PA6 V-0 - Temperature range -40°C / +100°C - Protection grade max. IP65 Vertical installation at the lowest point of the enclosure bottom so that condensation water can drain off via the breather.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Description:The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated muffler up to model size AODD 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * reinforced elastomers and thermoplastic diaphragms * absolutely oil-free * non-stalling operation

Commercially available spigots made of the materials polyethylene or polypropylene cannot be used for solvents. The spigot StopCock PA is made of electrically conductive polyamide and therefore perfectly suitable for solvents. StopCock PA fits onto 3/4" outer threads and with the supplied adapter onto 3/4" inner threads and therefore onto nearly all commercially available canisters and barrels where the discharge thread is at the bottom. The StopCock discharge cocks fits all containers with G 3/4" connection threads. Thread adapters facilitate connection of cocks to nearly all containers.

The draining rack is easy and flexible to set down on a table or working surface. Two large supports with wide bases ensure sufficient stability. Since both sides of the draining board can be used, it provides twice the hanging space. The collecting pan can simply be removed for emptying. The stable rods are individually placed into the holes of the draining rack and are clicked into place. Their positions can be changed at any time. Using a combination of rods of three different lengths (60 mm, 100 mm and extension to 150 mm), the draining rack can be adapted to any apparatus which is to be dried.

The spigot Compact for canisters and barrels captivates everyone through its compact build, which makes the valve on the canister ideal for use in refrigerators and on racks, etc. The short discharge does not protrude out over the lower edge of the container, which makes the valve a perfect choice even when space is very limited. The discharge's specially optimised design creates an even stream of liquid with no splashing or spattering. The spigot features easy motion and a tight seal. It is screwed on with a connecting cap nut. This guarantees a vertical position of the valve and makes it possible to adjust the valve later on. The Compact spigot fits all containers with G 3/4" connecting threads. PP, PE and PTFE are materials that offer outstanding chemical resistance to acids and alkalis. The Compact spigot is the ideal addition to the compact jerrycans – for perfect storage and filling when space is at a premium!

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The Pump Set is suitable for thin, flammable and highly inflammable liquids and hydrocarbons. Perfectly suited for withdrawing or transferring explosive media and solvents. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

StopCock angled

The oil drain device Type C2 is used for oil sampling or emptying the transformer tank. The device is welded into the transformer case. The device is designed for use together with connection pipe F DIN 42551 for draining the transformer case for regeneration purpose of the oil. The oil drain device Type C2 is deisgned in accordance with EN 50216-4:2002 type C2.