Digital indicators - Import export

Model 9180 supports force, pressure and torque sensors operating on the strain gauge principle, as well as the connection of position and angle sensors in potentiometer or DC/DC configuration. It also allows the measurement of process signals ± 1 V/ 5 V/ 10 V or 0 ...1 mA, 0(4) ... 20 mA. The current measured value is indicated on the 14 mm high LED main display, while a second display located directly below provides a reading of the peak value. The display is particularly suitable for highly accurate measurements due to the high accuracy of 0.1%. It is also possible to monitor up to 4 limit values and provide the results via relay or transistor outputs. Thus the process value display can be used for classification, process and control tasks. The current measured value is frozen on the display by activating an external HOLD signal. The TARE function is useful for balancing out previous loads for example.

The range of functions has been limited deliberately to ensure operation is simple and self-explanatory. With its unique, large and clear digit height of 20 mm, the digital display can be installed easily in process control panels and control cabinets. Thanks to the large choice of measurement signals that can be indicated, the display is ideal for use in a huge range of industry-based applications. As a simple and compact digital display, it can also be used as a multi-channel solution in laboratory or test systems, where several different measurements may need to be taken and displayed simultaneously. Specific characteristics: — Less expensive digital display — For force, pressure or torque measurements using gauge sensors — Two limit alarms optionally available — Extremely easy-to-read display with 20 mm digit height — Display range -1999 to + 9999 — TARE function — Scaling possible using teach-in procedure or by entering sensor data directly

The 9163 process value indicator covers a wide range of applications in which process values need to be measured, displayed, analyzed and transferred to higher-level control systems. Typical applications include measuring geometric values in production, for instance differential measurements, or testing material properties in the laboratory. The measured values can be transferred via PROFIBUS, RS232 interface or analog output. The multi-channel version can be used with up to four sensors. These sensors can be combined using mathematical functions, so that even complex measurement tasks can be performed with just the one instrument. Visual alarms on the display make it easier and more convenient to assess when values lie off-limits. Up to four configurable outputs are available as relay or logic outputs. The excellent measurement accuracy of 0.1% also makes this instrument suitable for high-precision applications.

Technical information Measurement device for precise, quick measurement and monitoring of the crimping depth. Electronic indicator with absolute capacitive gage. One-time zero-point adjustment, which stores the zero-point until the next battery change. Easy reading due to a large display. The indicator will be delivered with a solid Z+F holding unit, which has an integrated magnet. This ensures a safe fixture on any suitable surface.

Version with two counters (4 or 5 decades) and fine reading. Predestined for use with wood milling machines. Hollow shaft, max. Ø 30 mm. Display can be designed for “mm” or “inch”.

Robust design in a metal housing. Hollow shaft, max. Ø 20 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Attenuated counter system. Fine setting for correction of dimensions. Reversible counting direction.

Designed for large diameters. Hollow shaft, max. Ø 30 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof.

Extremely sturdy design in a metal housing. Hollow shaft, max. Ø 35 mm. Counter with 4 or 5 decades. With zeroing function. Clamp lever integrated in the design. Stainless-steel driving shaft as an option. Reversible counting direction.

Hollow shaft, max. Ø 14 mm. Counter with 4 decades and fine reading. Detent as an option. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof. Clamping plate (see accessories).

Ultra-small design. Hollow shaft with max. Ø of 10 mm. Minimum axle base of 19 mm. Counter can be designed for “mm” or “inch”. Stainless-steel driving shaft as an option.

Most-used size in slim design. Hollow shaft, max. Ø 20 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof. Clamping plate (see accessories).

Very small design Profile DA02: Ultra-small design Hollow shaft with max. Ø of 10 mm Minimum axle base of 19 mm Counter can be designed for “mm” or “inch” Stainless-steel driving shaft as an option

For connection of up to three DK probes with adapter cable CE29 or linear encoder. Equipped with RS-232C function as standard Peak value function, hold function Various input functions especially for automatic measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function

Counter display for connection of up to two DK probes with adapter cable CE29. Various data outputs can be made possible by installing expansion cards BCD output with LZ71-B card (optional) Comparator function: relay / open collector output with LZ71-KR (optional) Peak value acquisition / hold function Various input functions especially for automated measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function Flicker control

freely programmable Profile DE10P: Freely programmable directly via buttons on the device Hollow shaft, max. Ø 30 mm Stainless-steel hollow shaft LCD display with 6 digits and special characters Digit height approx. 11 mm Long battery life Easily replaceable batteries (standard AAA) Incremental measurement function, absolute value display high degree of protection

For large shaft diameters Profile DE10: Freely programmable electronic digital display for length or angular measurement Freely programmable via the ProToolDE programming software Hollow shaft, max. Ø 30 mm LCD display with 5 digits and special characters Digit height approx. 12 mm Reset, incremental measurement, offset via keyboard Long battery life Easy battery change without dismantling of the device

Freely programmable Profile DE04: Freely programmable electronic digital display for length or angular measurement Freely programmable via the ProToolDE programming software Hollow shaft, max. Ø 14 mm LCD display with 5 digits and special characters Digit height approx. 8 mm Reset, incremental measurement, offset via keyboard Long battery life Easy battery change without dismantling of the device

With bus interface, for direct linear length measurement Profile AP04S: Electronic position indicator with plug connection for magnetic sensor Requires magnetic sensor MS500H and magnetic tape MB500/1 Easily readable, two-line LCD for target and actual values integrated RS485 interface, CAN bus as an option Display accuracy up to 0.01 mm Absolute function via internal backup User guidance via bicolor LED

With bus interface Profile AP04: Electronic position indicator with bus interface Compact design Hollow shaft, max. Ø 20 mm Easily readable, two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Robust sensor technology unit thanks to magnetic scanning User guidance via bicolor LED

with bus interface, for format part or tool change Profile AP10T: setpoint display with bus interface without measurement of actual value large control key to confirm target value optimally readable backlit display Two-line LCD-Display integrated RS485 interface, CAN bus as an option user guidance via bicolor status LEDs IP53 type of protection, IP65 as an option

Profile AP10S: Electronic position indicator with plug connection for magnetic sensor optimally readable backlit display Two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Display accuracy up to 0.01 mm Absolute function via internal backup user guidance via bicolor status LEDs IP53 type of protection, IP65 as an option

With bus interface Profile AP10: Electronic position indicator with bus interface Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option Backlit display Two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Robust sensor technology unit thanks to magnetic scanning User guidance through status LEDs Mechanically compatible with the DA09S position indicator IP53 type of protection, IP65 as an option

Profile DA10R/1: Version with two counters (4 or 5 decades) and fine reading Predestined for use with wood milling machines Hollow shaft, max. Ø 35 mm Display can be designed for “mm” or “inch”

Profile DA10: Designed for large diameters Hollow shaft, max. Ø 30 mm Counter with 5 decades and fine reading Display can be designed for “mm” or “inch” Magnifying function for good readability Stainless-steel driving shaft as an option Axial seal, dustproof and splash-proof

Basic device with 5 decades Profile DA09S: Most-used size in slim design Hollow shaft, max. Ø 20 mm Counter with 5 decades and fine reading Display can be designed for “mm” or “inch” Magnifying function for good readability Stainless-steel driving shaft as an option Axial seal, dustproof and splash-proof Clamping plate (see accessories)

Profile DA08: Extremely sturdy design in a metal housing Hollow shaft, max. Ø 35 mm Counter with 4 or 5 decades with zeroing function Clamp lever integrated in the design Stainless-steel driving shaft as an option Reversible counting direction

Other versions Profile DA05/1: Robust design in a metal housing Hollow shaft, max. Ø 20 mm Counter with 5 decades and fine reading Display can be designed for “mm” or “inch” Attenuated counter system Fine setting for correction of dimensions Reversible counting direction

Basic device with 4 decades Profile DA04: Hollow shaft, max. Ø 14 mm Counter with 4 decades and fine reading Detent as an option Magnifying function for good readability Stainless-steel driving shaft as an option Axial seal, dustproof and splash-proof Clamping plate (see accessories)

Combined analog-digital position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Counter with 5 decades. Special scales, also for small numbers of pieces. Dustproof or oil-filled versions.