Detector - Import export

The GasPro gas detector can be equipped with sensors for up to five gases with ATEX approval. With the option of equipping the gas detector individually with various sensors, the GasPro gas detector is ideal for use in sewers, sewage treatment plants, landfills, ships, chemical and oil processing industries. An important unique novelty "positive safety" display. The GasPro signals the status at a glance via a three-color LED, green display = everything OK, yellow display = still OK, but a check is due soon, red display = not OK Particularly noteworthy is the loud alarm at 95 db and the optical signaling indicated by two LEDs that can be recognized from each side. The measured gas concentrations are saved every 10 seconds and stored in the internal memory. In addition, various events (switching on, alarm, calibration) are stored in the memory. The collected data can be transferred to a PC with a USB cable. A charging station with interface or a calibration station are also available.

Specially developed for the diverse tasks on the construction site, the Schütz Messtechnik company offers tailor-made measuring tools that reliably and comprehensively support the craftsman in all of his work “all around gas”. The complete solution for the load, leak tightness and usability test on gas pipes can be carried out safely and quickly, including documentation. GDPR-compliant as all personal data is protected against unauthorized access by a PIN. The measurement result can be printed out at the test point on site (optional), fully automatically and without interrupting the system. The professional solution for all measurements according to TRGI The prescribed load tests, tightness tests and usability tests, in the interior installation are possible with just one measuring device With integrated pump for pressure generation Very short measuring time through reference leak measurement PC software included

With the very simple operation and the generated and saved measurement protocol, the documentation can be created quickly and completely reproduced. It is possible to save the measurement data in the device and to print it out again later. No tracer gas nor a second measuring device are required for use. The internal battery, the 230V charger or the 12V vehicle voltage can be used for the energy supply. All included in a complete set. Ethane is always contained in natural gas; evidence of this gas is also evidence of natural gas. A lengthy gas analysis is normally required to prove beyond any doubt that the measured gas concentration is actually natural gas and not swamp gas. This, also due to the sampling, a difficult and time- consuming process, is completely eliminated. Measurement and sampling directly at the borehole is easily possible. The printout can take place after the measurement.

With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GP 2000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GP 2000 is a professional leak detector for everyday work.

With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 is a professional leak detector for everyday work.

With the GPL 3000 Ex you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 Ex is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 Ex is a professional leak detector for everyday work.

With the GPD 3000 you can detect the smallest of leaks. The digital display enables the measured value to be recognized precisely and the analog display makes it easy to assess the trend. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The sensor in the GPD 3000 is protected from dirt and mechanical stress by a metal protective cap. o simple o light o exact o rugged o 30 year guarantee o includes a free annual revision Clear digital display of the measured values enables even inexperienced users to easily search for leaks. Together with the robust metal sensor head and the stable housing, the GPD 3000 is a professional leak detector for everyday work.

With the GPD 3000 Ex you can detect the smallest of leaks. The digital display enables the measured value to be recognized precisely and the analog display makes it easy to assess the trend. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The sensor in the GPD 3000 Ex is protected from dirt and mechanical stress by a metal protective cap. o simple. Clear digital display of the measured values enables even inexperienced users to easily search for leaks. Together with the robust metal sensor head and the stable housing, the GPD 3000 Ex is a professional leak detector for everyday work.

Quick and reliable detection of all ferrous and non-ferrous metals in packaged and unpackaged piece goods. The compact metal detection system offers you safe performance and highest detection sensitivity. With its robust stainless steel conveyor belt construction the VARICON+ inspects piece goods of up to 50 kg. A very short metal-free zone (MZ) ensures interference-resistant, reliable inline metal detection. To suit the area of installation the system is available with a modular belt (wet area) or a flat belt (dry area). The conveyor belts are available with variable belt widths. The motor controller is fitted either with a conveyor stop in case of metal detection or an application-specific rejection system. For easy and thorough cleaning the VARICON+ series has a hygienic design. Quality which is reflected in BRC, IFS and HACCP certifications. The VARICON+ comes with IP65 protection. Higher IP ratings are optionally available.

The robust metal detector can be variably used in dry and wet environments. It ensures best test results for packaged or unpackaged piece goods. VARICONcompact safely checks for any contaminants enclosed in the product such as steel, stainless steel and non-ferrous metal, e.g. aluminum. The compact metal detection system works with highest detection sensitivity. Ideally suitable for a save test performance. With its robust stainless steel conveyor belt construction the VARICONcompact inspects piece goods of up to 20 kg. A very short metal-free zone (MZ) ensures interference-resistant, reliable inline metal detection.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Metal detection coil INTUITY reliably detects enclosed contaminants in your product or bulk goods. INTUITY can be flexibly used in dry or wet areas and achieves best results with its multi-simultaneous frequency technology: It simultaneously checks with at least two frequencies if your packaged or unpackaged product contains steel, stainless steel, iron or non-ferrous metal. The metal detection coil helps you to enhance the quality of your products and to minimize the risk of possible recalls. INTUITY reliably checks if your packaged or unpackaged products or bulk goods include metal foreign objects. It is impressive in terms of its high accuracy: With its multi-simultaneous technology it checks at the same time with at least two frequencies within a range between 30 and 900 kHz

Standard checkweighers with metal detector the inspection system for quality assurance at the highest level Bizerba's CWEmaxx series checkweighers with metal detector are used in the food industry mainly in middle- and high-performance settings. In the non-food area, they are used in lines with high output and wherever nominal weights up to 15 kg have to be checked. A built-in VARICON metal detector transforms the dynamic checkweigher CWEmaxx into a complete inspection system in compliance with HACCP, IFS, BRC and others. Verifiable combination units optimise quality assurance. They control the packaging flow by categorising and sorting goods by freely definable or legally stipulated weight classes. Checkweighers with metal detectors also check out of tolerance or contaminated packages and are automatically ejected. A combination checkweigher with metal detector is the ideal solution when space is at a premium, used with _connect.BRAIN the system will seamlessly integrate with...

For checking the gas detection and gas measuring devices. All gases can be connected in 12 liter aluminum pressurized gas cans.

Test gas set for testing gas detection and gas measuring devices GPL and GPD. According to the DVGW rules, a weekly check with 1 vol% CH4 is necessary. With screw-on extraction adapter and display of the flow. Delivered with conditioning filter in a carrying case (not including GasPen).

You can find the gas concentration needed for each device in the user's manual. There are additional costs for shipping by air freight. We recommend using the test gas set or a sampling valve.

Test station for revising gas detection devices. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-U has a vacuum manometer. With flow measurement. The test gas is conditioned (humidified)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Test station to review the gas detection devices. The control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 is possible. All gases can be connected to 1 liter aluminum compressed gas cans. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

GasMan is designed for personal surveillance tasks in harsh industrial environments. The GasMan is available for many types of gas.

The entry-level model for dry areas Bizerba CWDmaxx series checkweighers are designed as entry-level models for up to 250 weighings / minute. Due to its IP54 protection the CWD is the first choice for all applications not requiring wet cleaning. A built-in VARICON metal detector transforms the dynamic checkweigher CWDmaxx into a complete inspection system in compliance with HACCP, IFS, BRC and others.

The complete checkweigher inspection system for the fresh food area The Combination Checkweigher with Metal Detector with a built-in VARICON metal detector transforms the dynamic checkweigher CWFmaxx into a complete inspection system in compliance with HACCP, IFS, BRC, M&S and many others. Verifiable combination units optimise quality assurance. They control the packaging flow by categorising and sorting goods by freely definable or legally stipulated weight classes. Out of tolerance or contaminated packages are automatically ejected. The CWFmaxx modular checkweighing systems offer high IP protection IP65. One of the fastest and hygienic checkweighers on the market today. With weighing ranges of 10 grams to 15000 grams. Checkweighing up to 400 units per minute can be achieved. 12" operator touch screens and the Bizerba Industrial software BRAIN2, make this one of the most popular all round food industry checkweighing systems. When integrated with the Metal Detector VARICON it.

The GM 5 from Schütz Messtechnik always offers the highest accuracy of results even with changing tasks, since it can be adjusted to the different measuring tasks and environments. The device monitors the intake volume flow and can then adapt to the changed measuring environment and set, monitor and adjust the volume flow. In addition to reliable measurement results, optimal stability and constant response times are achieved. The menu navigation in connection with the automatic measuring range selection makes the GM 5 easy and safe to use by any user at any time. All that is required for commissioning is the selection of a task in the main menu and the measuring device independently sets the sensor selection, measuring range, pump output and alarm message according to specified specifications.

Borehole probe with sight glass, dust filter and water filter for concentration measurement in boreholes. Very robust construction that has proven itself over many years. Borehole probe with sight glass, dust filter and water filter for concentration measurement in boreholes. All bell and borehole probes are available with a demountable rod to fit in the carrying case - complete set with borehole probe CFRP, bell probe CFRP and foldable carpet probe CFRP weight-optimized.

Probe for easy sampling from closed containers or packaging Ideal for the analysis of gases in sample bags, for example

For measuring the gas concentration in shafts or under the Ceiling. Extremely light and robust. With special, protected quick change option for the hose, which can only be obtained from Schütz Messtechnik.

For measuring the gas concentration in shafts or under the Ceiling. Extremely light and robust. With special, protected quick change option for the hose, which can only be obtained from Schütz Messtechnik.