Connecting cables - Import export

17 901 106 Foot pedal for MP35 and MP55 Continous speed regulation; with connecting cable

Car Support with Charging Cable for Gas Pens Complete with connection cable and charge monitoring and operating display

M3 starter package, keypad operation via a cable connection

0.55 kW Compact externally ventilated single-phase three-phase motor with capacitor, 5 m connection cable included and shock-proof plug. The motor is designed in a way that acid vapours or aggressive atmosphere cannot damage it. Light and convenient Quiet and durable Quick motor assembly/disassembly by Lutz hand wheel

Compact and powerful single phase two-value capacitor motor. Light and convenient Quiet and durable With motor protection switch, connection cable and plug Quick motor assembly/disassembly by Lutz hand wheel Type of drive: Electric Explosion Protection: not explosion-proof

S3 starter package, push-button operation via a cable connection or wireless RF connection.

Incremental Profile AG01 Incremental: Easy mounting Through hollow shafts up to max. ø14 mm possible Integrated magnetic position encoder on output shaft Electrical connection via cable or connector

Analog Profile AG01 Analog: Easy mounting Through hollow shafts up to max. ø14 mm possible Integrated analog absolute position encoder Electrical connection via cable or connector

High-performance compact actuator for absolute positioning tasks Easy mounting. Through hollow shafts up to max. ø14 mm possible. Integrated analog absolute position encoder. Electrical connection via cable or connector.

High-performance compact actuator for simple positioning tasks Easy mounting. Through hollow shafts up to max. ø14 mm possible. Integrated magnetic position encoder on output shaft. Electrical connection via cable or connector.

This low cost tension/compression load cell is an especially robust component, which can be easily integrated in a girder assembly between two cables or chains for measuring force. The standard model comes with internal thread, allowing any adapter parts, for instance eye brackets, to be fitted in the axis of symmetry. Alternatively, the optionally available adapters with external thread can be used for quick and easy screw-fitting into a threaded hole made for the purpose. The radial connection cable is extremely flexible and designed for a wide range of motion. In order to achieve the greatest possible stability for such a small sensor, making it suitable not only for the laboratory but also for industrial use, all parts have been welded together including the cable guide bush in the sensor housing. burster TEDS with an electronic sensor datasheet or standardization of the output signal in the sensor connecting cable are offered as options

This miniature force sensor was optimised with respect to its height and is, at only 3.4 mm, the lowest known sensor with strain gage technology. Hardly higher than the diameter of its connection cable, it can also be housed in conditions where space is limited. Along with its minimal geometry, the force sensor is also particularly light. It has a high resonance frequency to follow quickly changing load alternations. Despite its extreme miniaturisation, in its application it remains completely robust and suitable for industry, not only with regard to the highly flexible cable connections or the full welding of sensors for the measurement ranges ≥ 0 … 10 N. The miniature compression force sensors are flat, cylindrical discs with covered bottoms. The central load application button for taking on compression forces is an integrated part of the top, which is the sensor‘s membrane.

Resolution max. 5000 pulses/revolution. Through hollow shaft up to max. ø28 mm. M12 or cable connection

The Load cell model 8451 has been developed for measuring the forces that occur during press operation. The internal measuring elements have a rugged design, which mean they can cope reliably with the steep force curves that are typical of press applications. They can be fitted or replaced quickly and easily on the press ram without the need for additional components around them. The force sensor is placed between the tool and the press ram and can thus measure the actual compression force directly in the axis of operation. The load cell measures the compression forces between the circular contact surfaces of plunger and tool. The pin on its top side and hole on its lower face are simply provided for mechanical fixing and centering the components correctly. The connecting cables are suitable for drag chains, designed for many movements and stably fastened in the sensor housing.

When decanting flammable liquids without the machines and containers involved in the process being sufficiently earthed, electrostatic build-up can occur, which for many substances can result in fire or an explosion. Bürkle’s Anti-static set ensures easy and reliable earthing. The Anti-static set consists of three colour-coded connecting copper cables with clamps in a handy plastic case.

The flow meter is a compact basic meter with a connection cable and plug for connection to an external control unit. Due to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables the precise measurement of the volume flow and measures thin-bodied to highly viscous media such as acids, alkalis, mineral oils, hydrocarbons and solvents precisely, quickly and above all efficiently. * Media examples: Paints, lacquers, mineral oils, acids, alkalis Features & Advantages * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Measuring range from 0.25 l/min - 8.3 l/min * Low frictional resistance

The tension and compression load cell model 8435 enables universal and fast installation, requires hardly any installation space and upgrades with technical data that are readily achieved by larger sensors. Due to its excellent price-performance ratio with regard to its mechanical and electrical data, the force sensor finds its place in products that are also manufactured in larger quantities and calculated with a small budget. This model of load cell uses proven strain gage technology to perform measurements. Strain gages are applied to the sensitive element and connected to form a full bridge. FEATURES Measuring ranges from 0 ... 200 N up to 0 ... 5000 N Small dimensions Inexpensive execution Stable anti-kink protection Made of high quality stainless steel Connecting cable suitable for drag chains burster TEDS optionally available

Due to their extremely compact design, these load cells can be used wherever static or dynamic load forces have to be measured in very tight spaces. Model 8416 is perfect for use in micro-technology and just as suitable for measuring tasks in the research and development sector. The ultra-miniature compression load cell model 8416 is a flat, circular disc, the bottom of which is sealed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. The sensor element inside the body carries a strain gage full bridge which outputs voltage directly proportional to the measurement variable upon application of force. The short nominal measurement distance of the ultra-miniature compression load cells due to their design provides a high degree of rigidity. If needed, the nominal characteristic value can be standardized in the sensor connection cable.

Load cell model 8417 measures the tension or compression force between both axially mounted metric exterior threads on the cylindrical sensor housing. Forces are only applied to the threadings, which are especially long, to accommodate counter nuts and must not be affected by external influences such as bending, lateral force or torsion. Any contact with units affixed to the sensor housing - even on the front - must be avoided. The measurement element is a membrane perpendicular to the axis of the sensor with a strain gage full bridge applied to the inner surface, which requires stable excitation with a rated value of approx. 1 mV/V. The connection cable is led radially out of the housing through a sleeve which is used for strain relief. FEATURES: —Measuring ranges from 0 ... 10 N to 0 ... 5 kN —Very small dimensions —Made of stainless steel —Rugged construction —Simple screw mounting —burster TEDS optionally available

In practice the requirement often arises to convert the measurement signals of a sensor into a standard signal in the simplest possible manner in the immediate proximity of the sensor. This permits trouble-free, low-loss transmission of measured values over longer distances to an instrument board or plant controls. Ideally suited for this purpose is the in-line measuring amplifier, which is inserted in between in the connection cable by means of plug contacts. Owing to its compact, robust design and low weight, it finds use in almost any application. Even movable locations subject to forces of acceleration, for example manipulators, present no problems. It is intended mainly for use of control cabinets in just about any location and is matched to a specific sensor. The aluminium housing is extremely sturdy and affords the greatest possible protection even in harsh environments.

In 1959, ÖLFLEX® was the very first control cable to be designed with colour-coded wires and was at the same time the first branded cable in the world. Today, ÖLFLEX® connecting and control cables are some of the most widely used in the world, and for good reason. Properties: — Flexible, almost entirely oil-resistant and universally applicable. — Fulfills the most demanding requirements for electrical and mechanical properties. — Comprehensive range for all environmental conditions, including wet/dry, EMC, outside/inside, various temperature ranges, etc. — Suitable for fixed connection or energy supply chains. — Also halogen-free and available with international licences.

The 501/RCG can be used for quick field connection of cables to equipment where historically hard wiring methods are used. This solution offers cost savings when carrying out essential inspectionand maintenance activities, including the capability to quickly swap out equipment on-site. Material: Nickel-plated brass Types of Protection: Ex II 2 GD, Ex eb IIC T6/T5 Gb, Ex tb IIIC T80°C/95°C Db Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. 4 or 6 Pins Cross section from 0,75 to 6,0 mm² Maximum voltage 300VAC/212 VDC Maximum power dependent on conductor size, max. 30 Ampère Temperature range: -60 °C / +60 °C Protection grades IP66, IP67, Deluge Protected DTS01

Indispensable extension socket on your desk, ideal to connect your laptop, including 4 USB-ports. 4 USB-ports as splitter for e.g. memory stick, Bluetooth etc. Expandable by connection to an external power supply (not included) on a self-powered hub. 1.8 m of connecting cable. 1.0 m connecting cable with USB-plug. Childproof sockets. In blister packaging. Cable length: 1,8 m Cable: H05VV-F 3G1,5 Socket: 2 USB-ports: 4 Colour: Silver

Indispensable extension socket on your desk, ideal to connect your laptop, including 4 USB-ports. 4 USB-ports as splitter for e.g. memory stick, Bluetooth etc. Expandable by connection to an external power supply (not included) on a self-powered hub. 1.8 m of connecting cable. 1.0 m connecting cable with USB-plug. Illuminated 2-pole ON/OFF safety switch. Childproof sockets. In blister packaging. Cable length: 1,8 m Cable: H05VV-F 3G1,5 Length approx.: 24,4 cm Socket: 4 USB-ports: 4 Colour: Silver Plug-in system: DE

Standard configuration Transparent board 100x174 cm, with RGB LED glass and LED backlighting speaker, FullHD quality video camera, sound system (loop radio, connecting cable, sound card, chargers, headphones), 3 identical monitors for speaker and operator, 4 LED lights for speaker lighting, black background

Complete set of 4K Transparent board 110x174 cm, with RGB LED backlighting of glass and LED backlighting of speaker, 4K quality video camera, sound system (looping radio system, connecting cable, sound card, chargers, headphones), 2 screens for speaker and 4K operator monitor, 6 LED lights for lighting speaker and backgrounds, backgrounds black, color paper and chromakey, teleprompter on the basis of a tablet

Premium configuration VideoDoska system for video recording and webinars a transparent board with a sensor 110x195; server with all the necessary components and software; two video cameras 4k 60fps; backstage camera, sound system (loop radio system, connecting cable, sound card, chargers, headphones); screens for the speaker (monitors, including a monitor to work in color, adapters, bracket, studio light kits, switching system, teleprompter professional monitor and a workstation to control and work with multimedia. monitors including monitor for color work, adapters, bracket); kits of studio light and background; switching system, teleprompter professional with monitor and work station for control, multimedia

Thread Union angular, GVS-W Thread G1/8 ... G1

Thread Union straight, GVS-G Thread G1/8 ... G1