Results for
PASCHAL-WERK G. MAIER GMBH
Germany
The Modular/GE Universal Formwork has really earned its name, because this system is used all over the world on many different building sites where it demonstrates its versatility, adaptability and flexibility, for foundations, walls, shafts, round walls, columns or beams. The degree of difficulty of the structures to be build can vary considerably, because the balanced range of panels means that the formwork can be adjusted ideally to all layouts and cross sections. The size of the structures to be build does not matter: small surfaces are not a problem for the Modular panels. And as far as large sizes are concerned, preassembled Modular panels can stay together as units or are supplemented by larger GE panels, with unlimited compatibility.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
The shoring frames TG 60 are made of steel tube of higher strength and are stiffened with 2 small diagonal braces. To transfer tensile forces, every frame is secured by hinged pins, locking pins or bolts to each other. In this way the towers can be assembled on the ground and placed by a crane. The shoring frames TG 60 are designed symmetrically – because of that you don’t have to care about the direction of the diagonal braces.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Our slab edge formwork is made up of three components: bracket, hook headed bolt connection and stop. In addition to slab edges, with and without overhangs, the slab edge formwork (bracket) can also be used for forming floor slabs.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
With its robust but lightweight steel frame, the e-deck can be used anywhere a crane cannot reach. All of our e-deck formwork is compatible with our Modular universal formwork. That means that connections and transitions between wall and slab or beams can be created without difficulty.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Circular Formwork with adjustable radii for waste water treatment plants, reservoir construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. - For fair-faced concrete - perfect concrete finish (no bolt impressions) - Infinitely adjustable for diameters from 5 meters to infinity - Only 0.28 - 0.55 ties/m² - Delivered ready to use to the construction site - Integrated crane lifting clamps - Perfectly round and with exact dimensions - System solutions for haunch girders and uneven surfaces
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
GASS is a further development of the commercially available aluminium shoring systems. With a maximum safe working load of up to 140 kN per leg, this is the aluminium shoring system with the greatest load-carrying capacity.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
The flexible slab formwork is ideally suited for ceilings in residential and industrial construction due to the optimal adaptation to any floor plan, the possibility of using any slab thicknesses and the lightweight individual parts. With only three main components, the formwork system also impresses with optimised material deployment.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
The multifunctional working-platform Multip by PASCHAL has proven to be one of the most efficient and most highly-safeguarded systems for work platforms on formwork. If you combine the PASCHAL formwork systems with Multip, this complete system comprising both formwork and scaffolding provides even better forming times, combined with the necessary working safety.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Reliable lateral protection according to safety standard EN 13374 - For a variety of applications (wall formwork, slab formwork, window and door openings, concrete slabs and exposed slab edges and upper wall edges) - Quick, easy assembly - According to safety standard EN 13374 - Use with a protection fence or wooden planks is possible A key element is the railing post lateral protection, which can be used for a range of applications when combined with various connecting parts. Thanks to the flexible application of the lateral protection system, you will save on investment and storage costs.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
PASCHAL Dam bracket is used wherever single-sided climbing is required, for example for reservoir dams, port and harbour constructions, lock-up constructions in inner city projects and refurbishment measures. The formwork panels can be tilted in fully variable positions on the dam brackets in both directions, allowing for ideal adjustment to the full range of wall slopes and wall abutments. All working platforms remain horizontal while the formwork is tilted.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
The climbing platform KBK, folding is a working and climbing scaffold which is supplied to the building site ready assembled. After erecting the guard railing post and unfolding the platform, KBK is ready to use and can be dropped into the clevis shoe using the crane.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
PASCHAL climbing systems – the complete solution for safe and economical climbing. The climbing units consist of rigid or slidable climbing brackets, adjustable props for supporting the formwork, boards, railing and possibly suspended scaffolds.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
It supports the efficiency and cost effectiveness of climbing systems in adjusting flexibly to the structure geometry and in permitting larger formwork units. With the climbing bracket 240 PASCHAL wall formwork systems can be also used as climbing formwork. This is especially an advantage for building a structure in several height phases. A complete climbing unit consists of climbing platform (bracket + planking), formwork, concrete and suspended scaffold and can be moved with only one crane cycle. Hereby efficient and economic work sequences can be achieved.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Circular Formwork with adjustable radii for waste water treatment plants, container construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. Advantages of clamp connection: - Less connecting pieces - Fast segment connection - Clamps can be “stored” at the segment - Stepless segment positioning with height offset
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Circular Formwork with adjustable radii for waste water treatment plants, container construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. - Infinitely adjustable for diameters from 2 - 5 meters, and 5 meters to infinite - Only 0.28 - 0.55 ties/m² - Delivered ready to use to the construction site - Perfectly round and with exact dimensions - System solutions for haunch girders and uneven surfaces - Compatible with all PASCHAL systems
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
The tie points for the one-sided tie rod equipment can be operated by just one person - this guarantees optimised working even with less manpower requirements and in confined spaces. The new system has the particular advantage of being able to be anchored either on one side or conventionally, depending on requirements.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
The adjustable modular column formwork by PASCHAL is a steel frame formwork whose elements are assembled according to the so-called windmill principle. With four elements each square and rectangular column cross-sections can be formed in the adjustment range of 20 cm to 50 cm in increments of 5 cm.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PASCHAL-WERK G. MAIER GMBH
Germany
The variable Grip column formwork is based on the windmill sail principle and achieves short shuttering times together with high quality surface finish for open-faced concrete.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
The PASCHAL circular column formwork consists of two identical half circles which are connected together with big keybolts rated for high tensile loads. The particular advantages of PASCHAL circular column formwork include the great pour heights and the large quantities of columns which can be built.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Lifting platforms are used as working platforms and for raising and moving inside formwork for elevator shafts and staircase cores as well as other structures where normal climbing units cannot be used because of the lack of space. The PASCHAL klik-klak beams are a modular component system which can be adjusted to all layouts.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
For special fields of application such as shaft formwork, tunnels or vaults PASCHAL will work out solutions in close cooperation with its clients: These custom formwork are made of wood, steel or compound material.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
The LOGO.S formwork system with a concrete pressure capacity of up to 100 kN/m² is fully compatible with all system components in the LOGO series which means it can be used universally around the world. This product has been designed specifically for the French housing and industrial construction sector as there is particular demand for steel facing. Moreover, strict requirements in terms of occupational safety are in place and adherence to these is checked by means of regular controls. In order to satisfy these specifications, the LOGO.S has an integrated working platform “Multip”.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Thanks to real-time monitoring, PASCHAL Maturix facilitates the efficient concreting process and, at the same, time provides well-founded evaluations. Based on the real-time analysis of the concrete strength, the optimal time for dismantling is determined. As a result, the number of defects due to early dismantling is reduced on the one hand, and, on the other hand, there are no unnecessary waiting times during the concrete maturity phase. The user receives a convenient notification as soon as the target value has been reached or if there is too much difference in the internal temperature. In order to guarantee the best possible concrete quality, the concrete temperature can be controlled and adjusted from any location by means of heating and cooling systems.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
PASCHAL Ident technology provides a unique electronic number to every formwork element,quite similar to a human fingerprint. Through this process, one is guaranteed with unmistakable and unique identification which is a pre-requisite for credit processes or for leasing. RFID technology has three essential components - the reader, the transponder(a computer chip with an antenna and casing) and the software that is associated with the reader. Data associated with the formwork element is transmitted online from the reader to the PC, or directly to the online portal.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Due to the low weight (30 kg/m²), the NeoR can be moved easily by hand – ideal for construction sites, even without a crane. - Universal fields of application: Foundations, columns, beams, walls - Height offset of the panels can be performed via oblong holes in the panel frame - Well-balanced range of panels - Keybolts as lightweight, friction-locked and cost-effective connecting pieces - Easy attachment of accessories using the hook head principle - The structural height is just 7.5 cm → low storage and transport volume - The flat steel frame guarantees robustness and durability - Fresh concrete pressure capacity of 50 kN/m² - Compatible with all PASCHAL systems Technical Data Panel widths: 90/75/60/45/30/15 cm Panel heights: 150/90 cm Large-size panel: 180 x 300 cm Frame depth: 7,5 cm Plywood: 12 mm birch plywood Max. concrete pressure: 50 kN/m² according DIN 18218 Tolerances of deflection: According DIN 18202, table 3, line 6
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
PASCHAL-Plan was created on the basis of the AutoCAD architecture. The layouts of this product can be entered into AutoCAD, or, alternatively, loaded from existing drawings. The formwork plans are then generated from predefined formwork elements. The plans generated in PPL can be edited and loaded into PASCHAL-Plan pro, with the panels and accessories being positioned at predefined locations. The connection and tie materials are automatically calculated, while users can work on the layout directly in various views. The construction sites are simplified, while the clear 2D drawings are generated after using this product, which can contain information that is relevant for the present task. Next, the detailed representations in 3D show the layout of various accessories and elements and the colored graphics help users understand the drawings.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
PASCHAL LOGO.3 wall formwork is an effective and robust large-size system. It can be adapted to any floor plan with its well-balanced range of panels. From the 2.40 metre wide large-size panels to the small plastic filler pieces, any formwork task in the system can be completed using the PASCHAL LOGO.3, with no need for expensive on-site solutions. Expensive on-site solutions can therefore be reduced to a minimum. LOGO.3 can be used in residential and business buildings as well as in industrial and engineering construction.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
PASCHAL formwork planning for the next generation for the planning with BIM technology. PPL assists building contractor’s work preparation department so that the use of formwork can be planned in an optimal way. The warehouse module shows the available equipment necessary for realisation of the planning. The additional equipment to be provided for construction in due time will be shown too. The interface to the PASCHAL AR app makes it possible to use in mobile form on the construction site.
Request for a quoteResults for
Concrete formwork panels - Import exportNumber of results
29 ProductsCompany type