• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • coils

Results for

Coils - Import export

GermanyStuttgart, Freiburg and Baden-Wurtemberg

Germany

Verified by Europages

The »speedfit« compressed air piping system is characterised by its simple and fast installation and it is ideally suited for conveying compressed air and liquids. It is installed without tools and the connections can be quickly fastened and released with additional sealing material not required. The »speedfit« compressed air piping system is fabricated according to BSX 5750 Part I, ISO 9001, EN 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

Request for a quote

Germany

Verified by Europages

width 50 cm age 2008 semi automatic electric coil inserting machine Wire comb book binder for Renz Ring Wire book, calendar and skip binding KA 300 calendar hanger system max. 1.000 cycles / h (neutral running) block thickness up to approx. 26 mm (approx. 260 sheets) electr. foot switch mobile sub-frame box delivery Ref: RE230187A Please ask for price. We ship and install worldwide!

Request for a quote

Germany

Verified by Europages

The robust metal detector can be variably used in dry and wet environments. It ensures best test results for packaged or unpackaged piece goods. VARICONcompact safely checks for any contaminants enclosed in the product such as steel, stainless steel and non-ferrous metal, e.g. aluminum. The compact metal detection system works with highest detection sensitivity. Ideally suitable for a save test performance. With its robust stainless steel conveyor belt construction the VARICONcompact inspects piece goods of up to 20 kg. A very short metal-free zone (MZ) ensures interference-resistant, reliable inline metal detection.

Request for a quote

Germany

Verified by Europages

Metal detection coil INTUITY reliably detects enclosed contaminants in your product or bulk goods. INTUITY can be flexibly used in dry or wet areas and achieves best results with its multi-simultaneous frequency technology: It simultaneously checks with at least two frequencies if your packaged or unpackaged product contains steel, stainless steel, iron or non-ferrous metal. The metal detection coil helps you to enhance the quality of your products and to minimize the risk of possible recalls. INTUITY reliably checks if your packaged or unpackaged products or bulk goods include metal foreign objects. It is impressive in terms of its high accuracy: With its multi-simultaneous technology it checks at the same time with at least two frequencies within a range between 30 and 900 kHz

Request for a quote

Germany

Verified by Europages

A very interesting aspect of our STS-spiral coils is the type with inverted fill material that is used, for instance, for polishing, descaling or removal of corrosion off rods or wires in a continuous operation. With an outside diameter of only 20 mm it is possible to reach an inner diameter of zero. Offering an enormous choice of dimensions and fill material qualities this brush has almost unlimited applications. The pioneering of this brush type has left its mark and shows in every detail of this brush. The diagram below shows how the STS coil is constructed: the fill material is fixed with a locking wire inside the backing tape. Available backing tapes We manufacture our STS-spiral brushes in eight different coil widths (WB) from 2,5 - 13,5 mm. As material we use mild steel, stainless steel (1.4301 or 1.4571) or brass. Variety The STS-spiral coil offers an enormous choice of dimensions in fill material, fill configuration, fill density.

Request for a quote

Germany

Verified by Europages

The STS-spiral coil is the only brush type that can be produced with very small diameters starting at an overall diameter of 17 mm. Offering an enormous choice of dimensions and fill material qualities this brush has almost unlimited applications in light or medium work. The long period of development of this brush type has left its mark and appears in every detail of the brush. The diagram below shows how the STS coil is constructed: the fill material is fixed with a locking wire inside the backing tape. Available backing tapes We manufacture the STS-brush in eight different coil widths (WB) from 2.5 mm to 13.5 mm. As material we use mild steel, stainless steel (1.4301, 1.4571) or brass. STS-spiral coils can be supplied for self installation, as well as a complete roller brush with shaft. Variety The STS-spiral brush offering an enormous choice of fill material, fill arrangements and fill densities. Depending on the fill material and dimension we can also increase the density by...

Request for a quote

Germany

Verified by Europages

Back in 1931 the history of an inimitable brush began: Kullen-Koti was already the patentee for this spiral brush with a double-sheet backing tape. Since then we have been developing this brush type and have manufactured the most variations. But one thing always remained the same: the double-sheet backing tape. Because of our experience, this system is the most effective and safe method. See our illustration which shows you the construction. Available brush sections: We manufacture our spiral brushes with four different section types in backing widths (WB) ranging from 4 mm to 18 mm. According to your requirements we choose the appropriate backing width considering the essential parameters: core diameter, fill material, fill density and working conditions. We supply backing tapes in bright steel as well as galvanised steel or stainless steel and acid/heat-resistant steel quality 1.4301, 1.4571, and 1.4541 (AISI 304, 316Ti) Manifoldness The roller brush coils with roller core are...

Request for a quote

Germany

Verified by Europages

Automatic inspection and test unit: Automatic choice of measuring ranges from 200 μΩ to 20 kΩ Resolution up to 1 nΩ Standard interfaces IEEE488, RS232, RS485, (USB and Ethernet option) Checking of tolerances, classifi cation with statistics Highest measuring accuracy: Measuring error ≤ 0.01 % Future-orientated measuring method with thermal e.m.f. compensation. High level of stability due to constant comparisons with internal reference values. Inductive probes: Current regulation results in voltage-free disconnection, calculation of cooling curves of coils. Menu control: Setting for measuring current entry for absolute or relative limits, classifi cation with statistics, bar display for calibration of measuring probes, determination of resistivity, and many other functions. The operation of the measuring section of the RESISTOMAT® model 2304, 2305 high-precision inspection and test unit is based on an upgraded 4-wire design.

Request for a quote

Germany

Verified by Europages

The GEMÜ 52 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. —Good cleanability —The solenoid can be replaced without removing the valve body from the pipeline —Hermetic separation between medium and operator

Request for a quote

Germany

Verified by Europages

The GEMÜ 202 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. Good cleanability The solenoid can be replaced without removing the valve body from the piping Hermetic separation between medium and actuator Connection types: Solvent cement socket \ Threaded connection Connection standards: DIN \ ISO Body materials: PVC-U, grey \ PVDF Conformities: EAC \ UL

Request for a quote

Germany

Verified by Europages

Technical Data Mat EN 10270-3-1.4310 - type of material Wri Left - coiling direction d 0.4 mm Wire diameter Di 1.6 mm inner coil diameter Ditol 0.08 mm (+/-) tolerance of inner coil diameter Dd mm diameter of mandrel Ddmin 1 mm Min. possible mandrel diameter Ddmax 1.3 mm maximum possible mandrel diameter Lk0 1.2 mm length of spring body Ls 20 mm leg length LsH mm leg length of the lever leg LsR mm leg length of the recumbent leg alpha 0 degree leg position when relaxed alpha1 degree prestressed rotational angle alphah degree working rotational angle alphan 23.35 degree maximum

Request for a quote

Germany

Verified by Europages

Technical Data Mat EN 10270-3-1.4310 - type of material Oefo 1/1 deutsche - loop shape Oest 180 degree loop position Oesttol 25 degree (+/-) tolerance of loop position d 0.2 mm Wire diameter D mm mean coil diameter De 2.7 mm outer coil diameter Detol 0.15 mm (+/-) tolerance of outer coil diameter Dh 3.2 mm minimum bush diameter F0 0.061 N initial tension Fn 1.101 N Maximum spring force Fntol 0.13 N (+/-) tolerance of maximum spring force Lk 2.5 mm length of unstressed spring body L0 6.2 mm length of unstressed spring, measured from inner edge of loop to inner edge of loop L0tol 0.6 mm

Request for a quote

Germany

Verified by Europages

Torsion springs in 1600 spring sizes for fast delivery from stock made of stainless steel EN 10270-3-1.4310 from Gutekunst. The torsion springs are made of round spring steel wire in a cylindrical shape with tangential straight legs and a linear spring characteristic in quality grade 2 (medium tolerance range) according to DIN EN 15800. The torsion springs are offered in the leg positions 0, 90, 180, 270 degrees and in the left and right winding direction. Simply select the right torsion spring on www.Federnshop.com and order it directly from Gutekunst using the shopping cart. In addition to its catalog program, Gutekunst produces individual torsion springs in any desired size and shape up to 12.00 mm wire diameter from all common types of spring steel in small quantities and large series.

Request for a quote

Germany

Verified by Europages

Technical Data Mat EN 10270-1 - type of material d 0.2 mm Wire diameter D 2.9 mm Mean coil diameter Dd 2.3 mm maximum diameter of mandrel De 3.1 mm Outer coil diameter Detol 0.25 mm (+/-) tolerances of outer coil diameter Dh 3.4 mm minimum diameter of bush F1tol N (+/-) tolerance of prestressed spring force F2tol N (+/-) tolerance of loaded spring force Fn 0.46 N maximum force in static use Fntol 0.1 N (+/-) tolerance of maximum force in static use Lk mm buckling length L0 7.5 mm unstressed spring length L0tol 0.96 mm (+/-) tolerance of unstressed spring length

Request for a quote

Germany

Verified by Europages

Extension springs in 4280 spring sizes for fast delivery from stock made of normal steel EN 10270-1 and stainless steel EN 10270-3-1.4310 from Gutekunst. The extension springs are made of round spring steel wire in a cylindrical shape with a 1/1 German eyelet on each side and a linear spring characteristic in quality grade 2 (medium tolerance range) according to DIN EN 15800. Simply select the right tension spring on www.Federnshop.com and order it directly from Gutekunst via the shopping cart. In addition to its catalog program, Gutekunst produces individual extension springs according to customer specifications in any desired size, design and eyelet shape from 0.2 to 12.0 mm wire diameter from all common types of spring steel in small quantities and large series. In addition to the classic cylindrical extension spring designs with a linear spring characteristic, Gutekunst also produces conical or barrel-shaped tension springs individually as required.

Request for a quote

Germany

Verified by Europages

Compression springs in 4536 spring sizes for fast delivery from stock made of normal steel EN 10270-1 and stainless steel EN 10270-3-1.4310 from Gutekunst. The compression springs are made of round spring steel wire in a cylindrical shape with a constant pitch and linear spring characteristic in quality grade 2 (medium tolerance range) according to DIN EN 15800. Simply select the right compression spring on www.Federnshop.com and order it directly from Gutekunst using the shopping cart. In addition to its catalog program, Gutekunst manufactures individual compression springs in every desired size and shape from 0.2 to 12.00 mm wire diameter from all common types of spring steel in small quantities and large series. In addition to the classic cylindrical compression spring design , with a linear spring characteristic , compression springs are also happy to be in special conical designs used with a progressive spring characteristic.

Request for a quote

Germany

Verified by Europages

High-performance drives are introducing completely new requirements for brake technology. On the one hand, the motor speeds and drive torques are constantly increasing. On the other hand, the installation space for the brake is shrinking. So, brakes are preferred which are both very efficient and require little space. The INTORQ BFK468 multi-pole spring-applied brakes meet precisely these requirements. Taking advantage of modern multi-coil technology, it reliably ventilates through its large air gap even when operating under strong forces. This level of performance is second to none!

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

Hot Dipped Slit Coils

Request for a quote

Germany

Hot-Rolled Slit Coils

Request for a quote

Germany

Cold-Rolled Slit Coils

Request for a quote

Germany

Electrolytically galvanized Slit Coils

Request for a quote

Germany

In powered mode, the field strength generated in the solenoid pulls the plunger against the spring tension out of the non-powered position. Solenoids for DC and AC voltage add considerably to the range of technical variants. As the solenoid encompasses the plunger guide tube and the plunger moves in this encapsulated structure, these solenoid valves are called plunger valves.

Request for a quote

Germany

eldec brazing systems: automatic induction brazing of pole coils The semi-automatic equipment is designed for manufacturing pole coils of hydro and wind power generators. The machine is based on the experience of the previous manufactured equipments. The machine is designed as a sturdy, high quality and low maintenance machine. The operating is very simple, on automatic mode by 2-hand operation with step by step program and on manual mode by touch-panel.

Request for a quote

Germany

Disc diameter Ø 360 mm or Ø 600 mm other diametres on enquiry Bent for Unwinding (for drums): up to Ø 550 mm width max. 200 mm

Request for a quote

Germany

This motorized ring and drum winding machine is designed for winding coilable material such as cables, pipes, hoses, steel ropes, plastic profiles etc. either as rings or on spools and drums. With the appropriate components such as length measuring device and material cutter, the material can be measured and cut to length. The winding speed is adjustable at the operating desk by means of a rotary potentiometer. The frequency-controlled winding drive allows a smooth winding of the material. * other coiler heads and winding spools available on request

Request for a quote

Germany

This motorized ring and drum winding machine is designed for winding coilable material such as cables, pipes, hoses, steel ropes, plastic profiles etc. either as rings or on spools and drums. With the appropriate components such as length measuring device and material cutter, the material can be measured and cut to length. The winding speed is adjustable at the operating desk by means of a rotary potentiometer. The frequency-controlled winding drive allows a smooth winding of the material. * other coiler heads and winding spools available on request

Request for a quote

Germany

Avs Romer Order Number : 606041 Without manual override for DC not for L-coils, Country of origin: Germany, Customs tariff number: 84812090

Request for a quote

Germany

AVS ROMER Item.Nr. : 616832 Country of origin: Germany HS Code: 84812090 Weight: 0.948 kg

Request for a quote