Results for
IMPEXRON GMBH
Germany
Avs Romer Order Number : 606041 Without manual override for DC not for L-coils, Country of origin: Germany, Customs tariff number: 84812090
Request for a quoteIMPEXRON GMBH
Germany
AVS ROMER Item.Nr. : 616832 Country of origin: Germany HS Code: 84812090 Weight: 0.948 kg
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 52 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. —Good cleanability —The solenoid can be replaced without removing the valve body from the pipeline —Hermetic separation between medium and operator
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 202 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. Good cleanability The solenoid can be replaced without removing the valve body from the piping Hermetic separation between medium and actuator Connection types: Solvent cement socket \ Threaded connection Connection standards: DIN \ ISO Body materials: PVC-U, grey \ PVDF Conformities: EAC \ UL
Request for a quoteSTAIGER
Germany
In powered mode, the field strength generated in the solenoid pulls the plunger against the spring tension out of the non-powered position. Solenoids for DC and AC voltage add considerably to the range of technical variants. As the solenoid encompasses the plunger guide tube and the plunger moves in this encapsulated structure, these solenoid valves are called plunger valves.
Request for a quoteSTAIGER
Germany
Application: Solenoid valve system for automatic monitoring the leaks of water supply pipes and tubes. To be used in household and laboratory equipment. Installation Fully automatic monitoring can be built in to the supply pipes of a water source. The sensor lays on the floor and is connected with the control electronics through a cable. The solenoid coil and control electronics are built in to a plastic housing. The voltage supply occurs over a network cable with an adapter connector. Function: Upon energizing, the control electronics opens the solenoid valve. The sensor can monitor a water film of approximately 0.5 mm and sends a signal to the electronics. The solenoid valve is closed and an audible alarm signal is triggered. This condition will be reset by interrupting the power supply. • Normal widths from DN10 to DN50 • Fittings G1/2 to G2 • Piezo alarm system • LED indicator of operation • Drinking water admittance on enquiry
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Coils and solenoids - Import exportNumber of results
6 ProductsCompany type