Boards - Import export

Optigrun Pitched Roof Board FKD 58SD is used for pitched roofs with a pitch in between 15° and 35°. Made from expanded polystyrene. With precisely fitting Z-fold on top and bottom edge and lateral indentations for safe shear stress transfer in direction of the water flow; no possibility of substrate reaching the protective layer thanks to tight fit of horizontal and lateral edges. The integrated chambers provide excellent anti-slippage for the substrate, high water storage capacity and an integrated water distribution system. Lay out according to manufacturer informations with max. 80 mm overfill (incl. vegetation mat).

Optigrun Meander Water Retention Board FKM 60 is used for multi-layered extensive green roofs.

"The only bristled drive board. – suitable for all pads on the market – Outstanding colour marking for clear identification as drive board – special inclined position of the filaments for optimal fixture and drive of the pads – when using cro-connect with integrated cro-lock there is a safe hold of the pads when lifting the brush unit Pad operating widths: 12"" - 22"""" Fill type: PP 100 Water hole: with / without"

"The velcro drive board for perfect connection with demanding pad backs. – perfect hold of velour backs and the softest pads – dampening effect for a smooth machine run – equals uneven ground surfaces – when using cro-connect with integrated cro-lock it provides a perfect hold of the pads even when lifting the brush unit Pad operating widths: 16"" - 18"""" Water hole: with / without Including matching cro-connect"

Multi-Board with 2 uprights, 1x perforated panel, 1x magnetic panel WxH 1000x600

Water Retention Box made of recycled PP material. With high temporary and possibly permanent retention volume in combination with a Flow Control System for specific regulation of water discharge and/or water storage.

Optigrun root protection membranes are used on non-root-resistant roof waterproofing under extensive and intensive roof greenings.

Optigrun Water Retentionbox WRB 170 on roofs used as retention areas, under extensive and intensive vegetation as well as traffic areas such as terraces, fire brigade access roads, car parks, etc.With closed, load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System With Capillary Bridges to transport stored rainwater from the drainage level into the substrate layer and to increase evaporation High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible)

Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for intensive green roofs with 0° roof pitch and varying layer heights.Base plate with load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible

Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for extensive green roofs with 0° roof pitch.

Optigrun Meander Water Retention Board FKM 30 is used for multi-layered extensive green roofs.

Optigrun Protection and Drainage Board FKD 60BU under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5Under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5 Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

Optigrun Drainage and Storage Board FKD 60BO under intensive roof greening in multi-layer construction and temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16Under intensive roof greening in multi-layer construction filled with Drainage Material Perl 8/16 Under temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16 Unfilled installation under intensive roof greening is possible with a substrate height of up to 400 mm in combination with Optigrün Filter Fleece FIL 300 (it is not possible for vehicles of any kind to drive over the unfilled Optigrün Drainage and Storage Board FKD 60BO) Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

Optigrun Drainage and Storage Board FKD 40 is installed beneath extensive green roofs and single-layered intensive green roofs for drainage and water storage.

Optigrun Protection and Drainage Board FKD 25 plus is installed beneath traffic surfaces and pathways. Also suitable for inverted roofs.

Optigrun Drainage and Storage Board FKD 25 for use on extensive green roofs with single- or multi-layer construction and under path surfaces (can be walked on).On flat roofs up to 5 % roof pitch In a triple-layer structure with filter fleece FIL 105 and extensive multi-layer substrate E Under thin-layer pedestrian pathways in gravel beds without bedding material The large naps can face either downwards or upwards Suitable for non-pitched roofs Suitable for use on inverted roofs With water reservoir

Optigrun Protection and Drainage Board FKD 12UK under public areas on buildings used by vehicles. Suitable for inverted roofsOpen to diffusion Incl. PP thermally strenghended with 23 l/m² x s flow rate (GRC 4) On roof surfaces with a minimum of 2 % regular gradient of the sealing plane Prevents accumulation of water Without water reservoir function

Optigrun Protection and Drainage Board FKD 10GF under pavement areas used for walking, under vegetation areas with no need for a water reservoir but increased pressure load and vertically along ascending, filled structural components.Protection and Drainage Board incl. PP filter fleece with 100 l/m² passage capacity (GRC 2) Incl. PE film adhered on the reverse As drainage element under floor surfaces used on foot with increased frequency For vegetation areas with no need for a water reservoir but increased pressure load Vertically along ascending, filled structural components Prevents accumulation of water Without water reservoir function

Optigrun Protection and Drainage Board FKD 10UK as a drainage element under floor surfaces used on foot and under vegetation areas with no need for water reservoir but increased pressure load.Open to diffusion Incl. PP thermally strenghtended with 75 l/m² x s flow rate (GRC 2) On roof surfaces wiht a minimum of 2 % regular gradient of the sealing plane Prevents accumulation of water Without water reservoir functíon

Optigrun Protection and Drainage Board FKD 10 is used as drainage beneath frequently used pathways and on vertical building components. Incl. PP filter fleece with 75 l/m² x s flow rate (GRC 2) On roofs with a minimum of 2 % regular gradient of the sealing plane Prevents accumulation of water Without water reservoir function

"The classical drive board with high-quality plastic barbed hooks. – suitable for all pads on the market – perfect hold and gentle treatment of the cleaning pad – innovative geometry of the plastic barbed hooks – resistant to chemicals of all common cleaning agents – almost unlimited life through unique plastic formulations – with cro-connect and integrated cro-lock safe hold of the pads when lifting the brush unit Pad operating widths: 12"" - 22"""" Water hole: with / without Including matching cro-connect"

Features • Without pre-drilling in gypsum plasterboard • Screw in directly • No special tool required • In gypsum fibreboards high holding values up to 20 kg per fixing point • Also suitable for M4 screws Description & Area of Application • Metal wall plug (zinc die-cast) with drill tip and pronounced external thread • Also suitable for double-layer gypsum plasterboard • PH2 driver for easy installation • Spiral Plus + Screw: Screw with PH2 driver

Features • Without pre-drilling in single-layer gypsum plasterboards • No cracking of the surface due to special thread geometry • In gypsum plasterboards high holding values up to 8 kg per fixing point • PZ2 driver for simple installation Description & Area of Application • Glass fibre reinforced gypsum plasterboard wall plug • Reinforced drill tip for easy installation without additional setting tool • For single layer gypsum plasterboards • Spiral + screw: Screw with PZ driver

The world´s only drive board with antibacterial effect. - recommended for all commercially available pads, especially for textile/microfiber pads. From a minimum thickness of 12 mm - over 99.9% effective - drive board body and harpoon drive face are fused together by patented laser welding to form an absolutely firm connection - pads are held securely and gently by innovative plastic barbs - chemical resistant to all commercially available cleaning agents - perfect pad hold when lifting the machine due to integrated cro-lock operating widths: 16"" - 18"" Water hole: with / without"

With the EASYPRO CS, you get a configurable system. This customised solution is ideal for industrial applications and saves costs as only the required components are installed. The design of the base plate allows the CS120 to be used in combination with up to three other measured variables in the water. The integrated TOPAX® MC multi-channel controller continuously measures the water parameters and keeps them within the target range. It controls a large number of actuators and final control elements and is simple and intuitive to operate. Components of the EASYPRO CS (mounted on base plate): . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Sample water filter . Flow monitor . DFR 45 flow controller with temperature sensor and sample water tapping point . Inlet and outlet tap . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multicoloured LEDs

With the EASYPRO, you get a customised system for monitoring and controlling the water parameters in your swimming pool. The TOPAX® MC multi-channel controller continuously measures the water parameters and keeps them within the target range. It controls numerous actuators and control elements and is simple and intuitive to operate. Multi-coloured LEDs provide a visual warning if the water parameters are outside the target range. . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Sample water filter . Flow monitor . Flow controller DFR 45 with sample water tapping point and built-in temperature sensor . Inlet and outlet tap . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multicoloured LEDs . Cover bonnet Some of the measuring cells are packaged separately and are not pre-assembled.

Tank gauges, oil pressure gauges, oil temperature gauges, boost pressure gauges, ammeters and voltmeters for additional installation. All items are from wellknown manufacturers in the field of display instruments

Desktop lightboard with RGB backlit glass and illuminated speaker. Antishock tempered ultratransparent glass (from 3mm) resistant to scratches. On metal frame, stable. Size 60x90 cm with illuminated speaker + pack of markers. Requires minimal space.

Desktop lightboard with RGB glass illumination. Antishock tempered ultratransparent glass (from 3mm) resistant to scratches. On metal frame, stable. Size 80x120 + included 2 small lights on racks and a pack of markers. Requires minimal space.