At motors - Import export

The PSE 34x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link).

The PSE 31x/33x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link).

The PSE 30x/32x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link).

The PSE 31x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link). Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link).

The PSE 272 positioning system is a complete system consisting of an actuator and a closed loop with a torque of up to 5 Nm. The target value is predefined via an analogue signal. The position is measured via an absolute measuring system and up to 15 rotations are possible. A release-input ensures additional security during positioning.

The PSE 30x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link). Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link).

The PSE 21x/23x-8 positioning systems are compact solutions with integrated intelligence that frees up the machine´s central control unit. The intelligent positioning system automatically adjusts auxiliary and positioning axes using a DC-motor, gear, controller, measuring system and CANopen, DeviceNet or Modbus RTU interface. No external motors, proximity or limit switches are required. The absolute measuring system at 64 revolutions (optional) eliminates the need for time-consuming reference runs and increases the efficiency of the machine. The economical motor also makes the system suitable for automation jobs that were previously uneconomic due to the cost. The separated supply voltages for the control and performance electronics provides an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches (optional) simplify start-up, even without the knowledge of the control software.

The HIPERDRIVE HDA 70 positioning drive allows adjustment procedures for positioning and auxiliary axes to be performed efficiently, at low cost and with a high degree of precision. The HIPERDRIVE is available with Industrial Ethernet interface for direct connection to a control module. Status massages retrievable via bus. With an durable EC motor.

The PSE 200 positioning system is a complete system consisting of an actuator and a closed loop with a torque of up to 10 Nm. The target value is predefined via an analogue signal. The position is measured via an absolute measuring system and up to 50 rotations are possible. The position report is via an analogue signal 0 .. 10 V or 0/4 .. 20 mA. A release-input ensures additional security during positioning (optional).

Compact and powerful single phase two-value capacitor motor. Light and convenient Quiet and durable With motor protection switch, connection cable and plug Quick motor assembly/disassembly by Lutz hand wheel Type of drive: Electric Explosion Protection: not explosion-proof

The small drum pump COMBIFLUX with removable motor FBM-B 3100 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. The small diameter of the outer tube allows pumping even out of narrow openings. The pump kits consists of pump with motor, 1,5 m hose and hand nozzle. Product attributes: - Connection motor and pump via quick-action coupling - Sealless in the liquid area - Small outer tube diameter - Holding hook for hand nozzles at the pump discharge - Low weight Benefits: - Motor easy to remove - Several pumps can be operated in series with one motor - Also suitable for filling smaller quantities - Can transfer from narrow-necked and containers difficult to access - Minimal force required to change drums - Hand nozzle always quickly at hand due to holding hook - Low storage space required

For driving the FLUX pump a wide range of electrical to pneumatic motors is available. Even if you work in hazardous areas or with flammable liquids. Depending on the application, different pumps can be driven by different motors. Thus, the output of a drum pump depends, among other things, on the power of the motor. Here you will find the most economical and safest drive solution for your application. Battery motor: FBM-B 3100 Commutator motors: FEM 3070 FEM 4070 F 457 F 458 F 460 Ex Compressed-air motors: F 416 Ex FPM

2-phase stepper motors Our 2-phase stepper motors are reliable and low-cost drives with a long service life. They are available in different sizes and types of power output, are continuously developed and are thus suitable for a variety of applications. AC servo motors The AC servo motors meet the highest demands regarding dynamics and accuracy and are used if dynamic, exact positioning or smooth running characteristics are required. The different types of power output and sizes cover the most diverse requirements. The benefits at a glance Highly dynamic High efficiency Long service life

The highest accuracy class “Ultra-Precision plus” impresses with an accuracy of 0.0005 mm, thus 0.5 µm. Due to the fact that the control unit of the Föhrenbach slides is compatible with the interfaces of almost all measuring systems, this extraordinary repeatability does not depend on a particular system or a specific provider. Föhrenbach profiled guide slides with integrated linear motor are available in the series PFL (with bellows covers) and PCL (with sheet metal covers). For both series three sizes are available. We developed three resp. two linear motors of different force.

age 2013 main motor incl. mentor control suitable for KBA RA 106 Machine condition: cleaned and checked Delivery time: immediately from stock Ref: KB200403A Please ask for price. We ship and install worldwide!

The manual premium vertical slicer sets worldwide standards in terms of ergonomics, hygiene and safety. It stands out due to its wealth of variants. Individual and powerful slicer for a variety of products to be sliced in manual mode. The vertical carriage ensures ergonomic, upright operation while providing an optimal view of the slicing result. The core component is a powerful blade drive, optionally with intelligent motor control Emotion®. In addition, the VS12 can be fitted with a Ceraclean® surface which is easy to clean and ensures easy product feeding to the blade.

Servo motors in hydropower plants normally operate water hydraulically. These servo motors perform the functions of opening, closing and control of shutoff and regulating devices and must be able to maintain the setting position at any prevailing pressure.

Technical information The stripper-crimper AM 03 universal is an electropnaumatic driven machine for rapid and reliable processing of loose male and female contacts. The contacts are automatically fed by a feeding bowl. In the range of 0,14 up to 2,5mm2 (AWG 26-14) wires and contacts can be crimped. Standard is a 4/8-indent crimp corresponding to MIL 22520/1-01. The adjustment of the stripping and crimping-depth is motoric. Different values for 50 programs can be stored. Adjustment and programming is done with the touch display. The touch display shows all important data, functions and errors. The machine can also be converted for different conatcts by using specific tool kits. All tools are easily replacable. Options Z+F crimp force monitor

Technical information The AI 04 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 8 mm is possible. Adjustments are very easy to handle with an adjustment knob.

Technical information The AI 01 E is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 5 mm is possible. Adjustments are very easy to handle with an adjustmend knob. In addition a special funnel to infeed thin wires is also delivered. Special: An integrated battery allows up to 10,000 working cycles when fully charged and without external power supply.

MPW Modular with air-cooled eddy-current brake, particularly for testing smaller electric motors smaller slowly running 1-cylinder engines drive units of e.g. two-wheelers. Essentially, three different types of construction may be distinguished: 1. MPW Modular for combustion engines and electric motors (primarily 1-cylinder combustion engines) 2. MPW Modular for foot-mounted electric motors 3. MPW F for flange-mounted electric motors Special designs, e.g. for foot- as well as flange-mounted electric motors may be offered on request. MPW engine test beds are available in four sizes with different load-carrying capacities (0,5 ... 40 kW).

Superlight, Quiet New lowvibration sander Small and Lightweight for Comfort and Convenience Free Sander fits the hand like a glove. It's humanengineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots. Minimized Hand Vibration The turbine motor of FS100C and the singleball air motor of FS50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.

PSD 48 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is ideal for automatic format changeover. The stepper motor with integrated control and bus communication permits higher velocities at lower torques. The PSD can be easily addressed by rotary switches (not for IO-Link). The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. The optional rotatable attachment housing allows you to attach the direct drives to the machine in any position, no angle plugs are required.

PSD 40 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is ideal for automatic format changeover. The stepper motor with integrated control and bus communication permits higher velocities at lower torques. The PSD can be easily addressed by rotary switches (not for IO-Link). The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. The optional rotatable attachment housing allows you to attach the direct drives to the machine in any position, no angle plugs are required.

Cleco's Right Angle Grinders meet the challenging requirements of many industries. They feature a high-performance 1,25 kW motor, to maximize material removal rates for the most demanding applications. The Right Angle Grinders’ internal components are built to last long, and are protected by a dual-layer, high-impact housing providing extreme durability. The most important informations: -Available in 100, 115 and 125 mm disc sizes -Versatile 270° adjustable guard -Intelligent Spindle lock for quick and easy abrasive changes -Quieter operation with rear exhaust overhose standard -Ergonomic, anti-vibration handle for increased comfort and less operator fatigue -Designed to fit all Type 27, Type 27 threaded hub and Type 1 abrasive discs