And international - Import export

CIC will be happy to support you if you want to break new ground in your procurement, e.g Procurement management External Purchasing Office ( EPO ) International Purchasing Office (IPO) supplier management Supply Chain Management Supplier Qualification

large portfolio for the internal coating of cans and tubes

internal coating machine for collapsible tubes

internal coating of beverage cans and bottles with a large length-to-diameter ratio

internal coating machine for beverage and food cans

compact internal coating machine for aerosol cans and bottles

high performance internal coating machine for aerosol cans and bottles

compact internal coating machine for collapsible tubes

In every country, different payment customs apply, and collecting claims from abroad is often not easy. Legal and intercultural reasons, in particular, can complicate communication with the debtor. We at Atlas Debt Collection have years of debt collection experience in all countries around the world, making us experts in the field of international debt collection. In addition to comprehensive consultation, we assess the prospects of success for your outstanding international claims in advance and, if necessary, engage our experts on-site to quickly realize your demands. We act as intermediaries between you and your customer, approaching them in their native language and mindset. This significantly increases the chances of success and, in most cases, avoids a time-consuming and costly procedure.

The BSM-03 UV curing chamber with an output of 2 kW is best suited for large-area UV curing, hardening, and bonding. The internal shutter is controlled by the UV-MAT for an accurate dose so that reproducible exposure is achieved even with medium-pressure lamps. With irradiance of 150 mW/cm², the required dose is typically achieved within several seconds. The UV curing chamber can be opened for loading and unloading while the lamp is on. The shutter is monitored and closed with a safety circuit so that no UV radiation is emitted outside the chamber. The sliding sample support also facilitates loading and unloading. It withstands all loads up to 20 kg. With 60 x 40 cm at the base and a height of 25 cm, the irradiation room offers plenty of space. The sample chamber temperature is about 45°C in operation. Due to the high uniformity of the irradiation, the samples may be positioned in any order. UV curing UV sealing UV bonding UV gluing surface activation

The terrestrial 3D laser scanner Z+F IMAGER® 5016 combines compact and lightweight design with state-of-the-art 3D laser scanning surveyor technology - allowing the user to reach new levels. It's equipped with an integrated HDR camera, internal lighting and positioning system. All components of the terrestrial 3D laser scanner have been further developed and adjusted to the new design, resulting in even better scanning results and a more efficient workflow. Dimensions Usable in smallest spaces Carry-on luggage size Weight Laser scanner without battery: ≤ 6,5 kg (14.3 lbs) Laser scanner with 2 batteries: ≤ 7,5 kg (16.5 lbs) Ideal weight for stable setup Makes field work easier

We mount engines to be tested under load or not under load, according to your requests, and ready to start. Wether these engines are provided by us or by you is irrelevant.

HPM Breeze is the consequent development of the common CL-, MQL and MQCL-procedures. Fluids will be checked during the production process and applied in a certain amount at a certain time and at a predetermined location. The HPM Breeze-procedure is extremely fine with an aerosol that adheres like a dense fog around the working area. HPM Breeze forms a completely closed and highly lubricating film. Where previously many litres of liquid were necessary it is now a small fraction thereof which suffices. The HPM Breeze process is used to lubricate and cool machining processes with extremely small quantities of cooling lubricant. An air-fluid mixture that prevents the development of frictional heat with optimal lubrication is employed for this purpose. The remaining heat is dissipated with the swarf. The LSJ Z35 is offered in 2 versions. 10 bar is standard. For more demanding applications, the LSJ Z35 is available in a version with 16 bar.

Our Breeze technology has many enormous advantages over the previous classic lubrication applications. Discover enormous savings potential for mass production when using our LSJ Mini in your process. This system can be used optimally in the event of always consistent tool operations. For the machining process, an average of between 5 and 50 ml of lubricant is used per process hour and tool. These consumption values can also be briefly — depending on the requirements of the individual operation — increased to up to 200 ml per process hour. In addition to this excellent advantage over the previous method, the HPM Breeze method offers further enormous advantages from an economic and ecological point of view. • For optimum use with a cooling channel diameter of 0,9 mm² and up. • Manual adjustment of the pressure parameters • Optimally suited for consistent series processes with one parameter

For decades, the crane magnetic transporters from the SH series have been used throughout Europe as the optimal solution for the crane transportation of sheets, even with larger sizes. Contrary to normal load lifting magnets, crane magnet transporters have a flatter magnetic field allowing them to take up thinner workpieces such as sheets already from 3 mm thickness. They are ideal for horizontal and vertical transport and extremely efficient, but they must be separated from the workpiece using a jacking fixture. With bend presses, they are an interesting alternative to mechanical carrying clamps for metal sheet guiding. The mobile crane suspension makes it possible to lift and move heavy metal sheets. The SH series is used where sheets have to be lifted, transported and moved with a crane, for example, in a material warehouse.

The AY series was developed specifically for sheet handling. They can measure technically with vacuum systems in the thin sheet area and are much more efficient. They are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.

These magnets can be individually adjusted to different tasks. They are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.

The manual magnet transporter HL-series are ideal wherever conventional load lifting magnets are not used due to the low material thickness. They can be used to transport sheets vertically or horizontally directly from the sheet shelf directly to the workplace or on a transportation vehicle. They are used for the secure transportation of sharp steel sheets in sheet storage, burn cutting operations and stamping. All technical data can be found in the .pdf file.

The manual magnet transporter magnetizes and demagnetizes with the push of a button. Nevertheless, it holds like a permanent magnet. Oily, sharp workpieces or hot burn cutting parts can be quickly moved with this. The HL 60-CEL has an ergonomic extended handle bar to pick up components on the ground. It is switched through a remote control in the handle. All technical data can be found in the .pdf file.

The EPM M electropermanent load lifting magnets are used where there is a frequent change of workpieces due to the very short switching times. Only a 230V rated current, depending on magnet with 230V or 400V, must be provided to use these devices and they are then immediately ready for use. Through electrical impulses within seconds, the EPMM from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. The electropermanent battery lifting magnet EPMM can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 4 mm.

The electropermanent load lifting magnets from the EMPH series are suitable for the lifting and transportation of individual slabs and unprocessed blocks. These magnets are used to handle loads with a large air gap or with scaled surface. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the EPMH from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. Through the impulse current control, the EPMH load lifting magnets do not use much energy. The effectiveness and efficiency can be seen on the one hand in the reduction of operating costs and on the other hand in a saving of time.

The SB950-SF is equipped with the highest safety technology. The electropermanent battery lifting magnet SB950-SF is the top product from ASSFALG in the 950kg load range for flat material. 400kg can be lifted for round material. The SB950-SF has an installed sensor. It measures the magnetic force, compares it with the workpiece weight and shows on the display if the workpiece can be transported. Parameters such as surface property, material thickness and material are considered here. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the electropermanent battery lifting magnet SB950-SF from ASSFALG can be automatically or manually switched with the push of a button. Even though no electricity is present during the load transportation, the workpiece is clamped as securely as it would be with permanent load lifting magnets.

These magnets can be individually adjusted to different tasks. They are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.

The EPMB electropermanent battery lifting magnets are considered the best load lifting magnet development in the past decades at ASSFALG. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the EPMB from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. The electropermanent battery lifting magnet EPMB can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 6 mm. All technical data can be found in the .pdf file.

The electropermanent load lifting magnet traverses TBK4 and TBK6 with automatic telescopic arm allow the lifting and transportation of sheets in different sizes from 3m to 16m. The patented solid steel modules are more heat-resistant than comparable modules made with a plastic casting mass. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the magnet traverses from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 5 mm. Magnet modules that are not needed can be switched off with the multi-channel control. This means a large magnet traverse system can be securely used for the transportation of smaller sheets.

The manual magnet transporters SH 12, from German production, are ideal wherever conventional load lifting magnets are not used due to the low material thickness. They can be used to transport sheets vertically or horizontally directly from the sheet shelf directly to the workplace or on a transportation vehicle. They are used for the secure transportation of sharp steel sheets in sheet storage, burn cutting operations and stamping. All technical data can be found in the .pdf file.

These magnets can be individually adjusted to different tasks. They are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.