Adaptor - Import export

With the thread adapter made of high-quality stainless steel 1.4301 (304) a pump, a drain cock or any other connection with thread G 2" (Whitworth pipe thread) can be screwed onto a container with G 1 1/2" thread. The thread adapter adapts and thus compensates for different thread shapes. The drum adapter ensures that decanting is liquid-tight; a seal made of ePTFE reliably seals the connection. The thread adapter made of stainless steel is electrically conductive and highly chemically resistant. It can therefore be used for filling solvents and other flammable liquids (e.g. alcohols, petrol, diesel etc.) as well as for weak alkalis and acids.

Enlarger made of polyamide for the enlargement of threaded or clearance holes to larger thread sizes. Features: — Temperature range -30 °C / + 100 °C — Protection grade dependent on the combination with other components

Enlarger made of nickel-plated brass for the enlargement of threaded or clearance holes to larger thread sizes. Features: — Temperature range -60 °C / + 200 °C — Protection grade dependent on the combination with other components

Reduction made of polyamide for the reduction of threaded or clearance holes to smaller thread sizes. Features: — Temperature range -40 °C / + 100 °C — Protection grade dependent on the combination with other components

Reduction made of nickel-plated brass for the reduction of threaded or clearance holes to smaller thread sizes. Features: — Temperature range -60 °C / + 200 °C — Protection grade dependent on the combination with other components

Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be mounted quickly and easily with clamping screws and can be used for different container openings. With G2" connector thread for Bürkle drum screw connections and pumps with immersion tube diameter up to 32 mm. The container connectors make decanting even easier and safer with their more secure connection to barrels. The connectors secure the pump in the barrel, enable a vertical position change and allow the required air exchange.

The discharging head DK 206 of the KERSTEN neXt® product family eliminates electrostatic charges on a wide variety of materials. .

Adaptive optics is a special form of high-performance laser mirrors. Their characteristic is that the mirror surface is designed as a membrane, which can be deformed in a controlled manner by pressure change on its back. The shape errors occurring in this case are extremely low; we tolerate them with a maximum of 0.0005 mm. Our adaptive optics are suitable for use with laser power up to 10 KW thanks to integrated direct water cooling and HR coating. Most common types are the adaptive optics with elliptical membrane as these can be used directly to the 90 ° deflection. They are identical to our standard planes of identical aperture and therefore do not need special housings. In addition to the elliptical varieties, LT Ultra also offers round adaptive mirrors. As a rule, these replace the concave spherical mirror of an existing telescopic beam expander directly at the resonator. Round adaptive mirrors can only be used with deflections <10 °. …

The range of material grades available and individually customisable pumping and stirring technologies provide optimum boundary conditions for any substrate composition. Pre or post treatment of the substrate can be carried out by installing additional tanks (e.g. hydrolysis, sugar beet silos and post digesters). With Lipp tanks for biogas plants which are built and used all over the world, you will benefit from 50 years of experience in plant and tank construction. They are constructed using VERINOX stainless steel which is characterised by maximum leak tightness and high quality. Stainless steel digester with a digester chamber volume of 100 to 10,000 m3 Wide range of tank roofs With or without optional gas accumulator Flexible stirring technology which can be adapted to the digester and substrate Smooth internal walls and uniform temperature distribution

Technical data The AM 03 C is an electropneumatic, modular stripper-crimper for rapid and reliable processing of small, loose male and female contacts and for small cross-sections. The contacts are automatically fed by a feeding bowl. The adjustment of the stripping and crimping depth is manually. 50 different programs can be stored. Adjustment and programming is done with the touch display. The touch display shows all important data, functions and status. The machine may be adapted to different contacts and wires using the corresponding tools. Options Especially for short, turned contacts and cross sections Cost-effective entry-level model Fast cycle time Compact design Short infeed length

Technical information Electropneumatic driven, easily adaptable crimpmodule for processing of loose Z+F ferrules integrated in fully automatic machines. In the range of 0.5 to 10 mm² (AWG 20 – 8) wires and ferrules can be crimped. Standard is the trapezoidal crimp corresponding to DIN 46228 part 4. The machine can optionally be adapted to other crimpforms. Adjustments, important data, functions and status will be programed and shown on the touch display. Universal use in the specified range without tool change. I/O interface enables easy integration and time-optimized function in fully automatic systems.

Technical information The AI 02 S3 is a stripping machine driven by an electric motor. Special feature: A special adapted funnel allows to insert two or three wires and strip it in a single step. By turning the stripping blades, the minimal stripping length can be reduced to 3 mm.

The PERFECT AirVent cable gland: protection for hermetically sealed electro-technical and elecronic enclosures against condensation water from alternating temperature and pressure. Features: — continuous ventilation — adaptation of the inner pressure — water entry pressure of the Membrane > 0,3 bar — available in sizes M20, M25 — for cables from 5 to 16 mm — temperature range -20 °C / +100 °C — protection grade IP66 / IP68

The PERFECT AirVent cable gland: protection for hermetically sealed electro-technical and elecronic enclosures against condensation water from alternating temperature and pressure. Features: — continuous ventilation — adaptation of the inner pressure — water entry pressure of the Membrane > 0,2 bar — available in sizes M12, M16 and M20 — for cables from 2 to 13 mm — temperature range -20 °C / +100 °C (dynamic) — protection grade IP66 / IP68

Adapter enabling electrical equipment using an earthed socket system to be used in countries with the British plug system. This travel adapter is not a transformer or a frequency converter. Childproof socket. With 13 A fuse. In blister packaging. Max. load: 13 A/250 V

With 1 earthed socket and 2 Euro sockets. With illuminated ON/OFF switch. Childproof sockets. Colour: White Plug-in system: DE

Efficient surge protection made from gas discharge tube and metal oxide varistors with thermal fuse. Protects electrical appliances against surges with a max. up to 13.500 A. Protects phase, neutral- and the protective earth. Indicator for the protective function. Max. loading of 16 A/3680 W. Childproof socket. In blister packaging. Nominal current: 16 A Colour: Silver/Black Plug-in system: DE

Plug: CEE 16 A, 230 V, 50/60 Hz. Socket: earthed 16 A, 230 V, 50/60 Hz, IP 44, with childproof. Plug: CEE 230 V/16 A Socket: 2 pin + E 16 A (DE) Equipment: with childproof socket

For universal outdoor use and permanent use on sites, IP 44. When touched by current-conducting leads or parts, the current supply is automatically interrupted to protect against dangerous bodily injury and electric shocks. For the best possible protection when using electrical equipment. With RCD plug IP 44 and water-jet protected connector. Function test indicator. Easy to use: simply connect to socket and connect the required appliances. Cut-out time: Residual current: 30 mA. Working temperature: -25 °C bis 40 °C. Design protected. Cable length: 2 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Plug-in system: DE

Adapter with comfortable, external foot switch. Robust hand/foot switch with flexible 1.5 m cable. Convenient switching state indicator on the external switch. Switchable sockets with childproof, max. 3500 W. In blister packaging. Nominal voltage: 230 V Nominal current: 16 A Cable length: 1,5 m Plug-in system: DE

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, short connection thread: M12-M63, PG7-PG42, long connection thread: M12-M63, PG11-PG29

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, short connection thread: M12-M63, PG7-PG48, long connection thread: M12-M63, PG7-PG48

PP films non top-coated HERMA PP films without a topcoat are versatile, ranging from white 40 µm films for visually very attractive glossy labels to weather and UV resistant films for outdoor use that combine high printing quality with great durability. They achieve excellent printing results with standard printing methods such as flexo, letterpress, offset, and gravure printing. Before printing, it is recommended to refresh the corona pretreatment.

PP fims top-coated A special surface treatment ensures good printing results with all standard printing methods, allowing users to produce very attractive glossy labels. The films are especially suitable for labelling of cosmetics products, household cleaners, etc., and for applications requiring weather and chemical resistance.

The DaiTec offers all the advantages of the Conti-TDS technology and is specially tailored to the requirements of the milk processing and food industry. It is characterized by its 3A certified design and a powder feeding table with integrated hopper at an ergonomic working height. It is connected directly to existing containers and is ready for operation after a few simple steps. Due to its powerful suction vacuum, the machine can suck in and disperse directly from the powder container by means of a suction pipe in addition to suction from the hopper. It ensures dust-free container emptying, powder transport, powder introduction, powder wetting and dispersion. Agglomerate-free, highly concentrated, homogeneous and very stable dispersions due to the use of high shear energy and the wetting/dispersing of powders under vacuum. Excellent emulsifying properties - narrow spectrum of droplet size even without high pressure homogenizer. 3A-certified design

The quick and economical shuttering adapters from RATEC allow for efficient and safe fixing of shuttering elements. Our adapters feature integrated Pro-Magnets and can be combined to make the perfect addition to any shuttering system, for example for recesses, additional upstands in every corner or for fixing insert parts. Find out for yourself what our multitalents can really do. We would also be happy to develop individual adapter solutions for you.

No problem to change-over from O.D. clamping to I.D. clamping Change-over from O.D. clamping to perfect I.D. clamping, without changing the clamping device? No problem with MANDO Adapt: Place the mandrel in the mounted clamping device, tighten three screws, and lock the mandrel in the clamping device. Reduce time In this process the mandrel engages in the coupling of the clamping device via a sophisticated mechanism, where otherwise the clamping head engages. MANDO Adapt is attractive with extreme rigidity and precision. Without adjusting For rotating products, concentricity of 0.005 mm between chuck taper and mandrel taper can be achieved. For stationary clamping devices repeatability of 0.003 mm is possible. And best of all: This can all be accomplished without adjusting.

No problem to change-over from O.D. clamping to I.D. clamping Change-over from O.D. clamping to perfect I.D. clamping, without changing the clamping device? No problem with MANDO Adapt: Place the mandrel in the mounted clamping device, tighten three screws, and lock the mandrel in the clamping device. Reduce time In this process the mandrel engages in the coupling of the clamping device via a sophisticated mechanism, where otherwise the clamping head engages. MANDO Adapt is attractive with extreme rigidity and precision. Without adjusting For rotating products, concentricity of 0.005 mm between chuck taper and mandrel taper can be achieved. For stationary clamping devices repeatability of 0.003 mm is possible. And best of all: This can all be accomplished without adjusting.