Acid-resistant - Import export

are bolts hot forged from all common materials including stainless, acid resistant and heatproof (inductive hardening, case hardening, quenched and tempered) steel. Diameter range of M 12 - M 80 with lengths reaching up to 800 mm. Tailored manufacturing according to specific standards, drawings and samples.

The fluoropolymer coating for special tank systems and containers. Modern tank and environmental technology requires safety and cost effectiveness. Gutbrod stands for innovative ideas and a dedication to service in coating with fluoropolymers and other technical, high-performance materials. Using products with the name, a chemical and acid resistant inner coating that is sustainable and cost-effective can be applied to special tank systems and containers through an access port. The material for this Fluorpolymer-coating, which will be applied with a specific method, is highly resistant against chemicals and acids, and has extraordinarily advantages, compared with common coating and lining systems.

Tantalum is a shiny grey, very hard and yet ductile heavy metal from the vanadium group, it is easy to form and weld. Tantalum belongs to the refractory metals, is very resistant to almost all acids (except hydrofluoric acid) and has a high absorption capacity for hydrogen and nitrogen. In nature, tantalum only occurs bound together with niobium. Tantalum is used in electrical engineering, chemistry, in high-temperature furnace construction, in evaporation plants and even in nuclear technology. Tantalum is added as an alloying component to rust and acid-resistant steels. Tantalum carbide is used for the production of hard metals. At E.WAGENER you can obtain tantalum in all common forms, alloys and processing forms, always in accordance with your requirements.

Material: AlMg5 Properties: acid-resistant, low specific weight, electrical and thermal conductivity We produce our STAX aluminium fibers AlMg5 in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm and fine 60 μm. STAX aluminium fibers AlMg5 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter Application for STAX aluminium fibers AlMg5 you find within products for lightweight, shielding, damping or insulation. If you are looking for aluminium fibers for your specific application, please do not hesitate to contact us.

Material: 1.4841 (X15CrNiSi25-20) AISI 314 Properties: highly heat-resistant, corrosion- and acid-resistant, not magnetizable, austenitic. In-house developed production equipment allowos us to produce fibers of this material in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm and on demand fine 60 μm. STAX stianless steel fibers 1.4841 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter STAX stainless steel fibers 1.4841 find application in the automotive area, as filter material, sound damping and -insulation as well as in many other areas with high demand to heat-resistance. If you are looking for stainless steel fibers for your specific application, please do not hesitate to contact us.

Material: 1.4113 (X6CrMo17-1) AISI 434 Properties: heat-, corrosion- and acid-resistant, magnetizable We produce our STAX stainless steel fibers 1.4113 in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm, fine 60 μm and on demand extra fine 30 μm. STAX Edelstahlfasern 1.4113 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter Applications for STAX stainless steel fibers 1.4113 are for friction material as in brakes pads, further as filter material or special round filters (as well in half-round version, see photo), sound damping or -insulation. If you are looking for stainless steel fibers for your specific application, please do not hesitate to contact us.

Our hygiene area mainly includes button brushes and handle brushes. They are boil-proof, acid and alkali-resistant and have a long service life. They are often used in the food industry. Different colors are used to divide into different hygiene areas.

The brush cores are made of special reinforced polypropylene making them light, resistant to acids and alkalis and suitable for use in the food industry. The range of options is extensive. All in all we offer seven standard core diameters with three fill density variations each: low, medium, and high - making a total of twenty one standard cores to choose from. Almost all fill material qualities can be used. To assemble a complete roller brush is remarkably quick an easy as it does not involve any complicated mechanical connections, simply slide the brush segments on to the brush shaft and secure them in position with two locking collars. By standarding the sizes of our brush cores we are able to offer lower unit prices and faster delivery times. But the fact that our brush carrier sizes are standardised certainly does not mean that the choice we offer is limited. If required the standard internal bore diameter of the brush segments and locking collars can easily be reduced by...

Back in 1931 the history of an inimitable brush began: Kullen-Koti was already the patentee for this spiral brush with a double-sheet backing tape. Since then we have been developing this brush type and have manufactured the most variations. But one thing always remained the same: the double-sheet backing tape. Because of our experience, this system is the most effective and safe method. See our illustration which shows you the construction. Available brush sections: We manufacture our spiral brushes with four different section types in backing widths (WB) ranging from 4 mm to 18 mm. According to your requirements we choose the appropriate backing width considering the essential parameters: core diameter, fill material, fill density and working conditions. We supply backing tapes in bright steel as well as galvanised steel or stainless steel and acid/heat-resistant steel quality 1.4301, 1.4571, and 1.4541 (AISI 304, 316Ti) Manifoldness The roller brush coils with roller core are...

These brush types are especially versatile to mount and visually adaptable. The core material is PVC, resistant to acids and alcalines and suitable for temperatures from -40°C to +60°C. We deliver our standard types from stock in 15 different profile types, filled with synthetic filaments of polyamide (PA6) and polypropylene (PP). As our standard types which are available from stock we chose our most demanded sealing brushes concerning the trim heights and overall lengths.

Cylinders with Ertalyte piston rods are particularly suitable for use in the food and chemical industries. High resistance to acids, good electrical insulating properties, wear resistance, excellent sliding properties and even resistance to gamma rays or X-rays allow it to be used under difficult conditions. For the use of pneumatic cylinders in environments with radioactive radiation, we also stock cylinders with radiation-resistant seals.

Applications High-quality fluorinated materials like ETFE, PFA and the Thermoplast PE, are used by ChemResist. ETFE and PE are also available as electrically conducting versions. ChemResist ETFE is FDA- and EU-conform. This also applies to electrically conductive specifications. Partly and fully fluorinated polymers offer universal and permanent resistance to acids, alkalis, solvents and chlorides. ChemResist possesses an extremely smooth and anti-adhesive surface and thus prevents bacterial adherence or growth. In the manufacture of highly pure products (chip industry, high purity grade chemicals) ChemResist prevents impaired quality from foreign substances or dissolved metallic ions. If special parts are to be lined, ChemResist possesses distinct advantages both from an economic as well as a qualitative point of view. The process can be adapted flexibly to the circumstances or requirements (preparation of tooling is not required). Even rigid construction specifications can...

Applications High-quality fluorinated materials like ETFE, PFA and the Thermoplast PE, are used by ChemResist. ETFE and PE are also available as electrically conducting versions. ChemResist ETFE is FDA- and EU-conform. This also applies to electrically conductive specifications. Partly and fully fluorinated polymers offer universal and permanent resistance to acids, alkalis, solvents and chlorides. ChemResist possesses an extremely smooth and anti-adhesive surface and thus prevents bacterial adherence or growth. In the manufacture of highly pure products (chip industry, high purity grade chemicals) ChemResist prevents impaired quality from foreign substances or dissolved metallic ions. If special parts are to be lined, ChemResist possesses distinct advantages both from an economic as well as a qualitative point of view. The process can be adapted flexibly to the circumstances or requirements (preparation of tooling is not required). Even rigid construction specifications can...

The spigot Compact for canisters and barrels captivates everyone through its compact build, which makes the valve on the canister ideal for use in refrigerators and on racks, etc. The short discharge does not protrude out over the lower edge of the container, which makes the valve a perfect choice even when space is very limited. The discharge's specially optimised design creates an even stream of liquid with no splashing or spattering. The spigot features easy motion and a tight seal. It is screwed on with a connecting cap nut. This guarantees a vertical position of the valve and makes it possible to adjust the valve later on. The Compact spigot fits all containers with G 3/4" connecting threads. PP, PE and PTFE are materials that offer outstanding chemical resistance to acids and alkalis. The Compact spigot is the ideal addition to the compact jerrycans – for perfect storage and filling when space is at a premium!

OTAL® foot pumps with delivery tubes made of PP, resistant to weak acids, alkalis and detergents. The telescopic immersion tube adapts itself to the container height on insertion of the foot pump. This ensures good removal of residual liquid and means that the foot pump can be used with different containers.

OTAL® hand pumps with PP delivery tubes, resistant to weak acids, alkalis and detergents. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the hand pump can be used with different containers.

Cable marker holder with wings Material PVC Colors Clear transparent. Temperature range Shape permanence from –30°C to +60°C (–22°F to +140°F). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Program (except for battery acid). Resistance to temperature and ageing meets norms of Partex Product Test Program. Attachment Cable tie

Material Acid-resistant stainless steel to Swedish Standard SIS2347/SIS 2348, equivalent to AISI316 L and DIN 17440. Print Stamped Text Single-character markers: 0– 9, A– Z, Å, Ä, Ö, special characters and symbols. Multi-character markers: alphanumeric characters 0 – 9, A – Z, Å, Ä, Ö, special characters and symbols with customized text arranged in either one or two rows. Temperature range Non-flammable. Resistance Good resistance to heat, cold, corrosion, acids, chemicals etc. Attachment Stainless steel cable ties

Closed marker holder with a pocket to hold marker tags Material PT+: PVC PTZ+: Halogenfri (ZEREX) Colors PT+: Clear transparent. PTZ+: Yellow sleeve, transparent pocket Temperature range PT+: Shape permanence from –30°C to +60°C (–22°F to +140°F). NB! Only the sleeve. PTZ+: –30°C to +90°C (–22°F to +194°F). NB! Only sleeve. Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Programme (except for battery acid). Resistance to temperature and ageing meets norms of Partex Product Test Programme.

Flat, hard-wearing holder for combination or multi-character marking using Partex PK(Z), POK and PO(Z)-09. Material PKH070 – cadmium and silicon free PVC. PKH70 POL – Polyamide 6.6 (halogen free). PKH110 POL – Polyamide 6.6 (halogen free). Colors Black, homogeneously coloured. Temperature range Shape permanent between –30°C and +70°C (–22°F to +158°F). Resistance Self-extinguishing Good resistance to chemicals, gamma and UV radiation. Polyamide 6.6 resistant to organic solvents with limited resistance against acids and alkalics Attachment Cable tie

Electrostatically conductive “ec” floorings for optimum ESD protection of electronic devices and equipment. Suitable for areas with a risk of explosions and fork-lift-truck areas. Largely resistant to acids and alkalis. Key Features: Good for very heavy usage Very high footfall sound absorption (10 dB) R9-slip resistance Free of PVC Increased safety thanks to high fire-retardant properties No coatings needed

All media contacted parts are resistant against acid and demineralised water, media must be compatible with V2A stainless steel, version 1.4301. Mobile, integrated 60 l tank, stepless adjustable pressure, metering device for cleaning agent, water shortage control, overheat fuse. Volume 2,4 l/m. 10 KW, 16A. 5 m hose with large pistol, hand screw coupling and lance ESR-LA 600. Hose with quick change couplings at the device.

All media contacted parts are resistant against acid and demineralised water, media must be compatible with V2A stainless steel, version 1.4301. Mobile. Parts cleaning collector with sturdy drip-off grid, 80 kg load capacity, 30l. Water recycling via special sedimentation system with filter monitoring. 60 l water tank, 5 l cleaning agent reservoir, stepless adjustable pressure, metering device for cleaning agent, water shortage control, overheat fuse. Volume 1,8 l /m. 10 KW, 16A. 5 m hose with large pistol, hand screw coupling and lance ESR-LA 600, 2 m hose with small pistol, quick change coupling and nozzle ESR-ST. Hoses with quick change couplings at the device.

For seams requiring a high degree of heat resistance for protec tive clothing of firefighters, metal-processing industries, foundries as well as for battle dresses, canvas covers and equipments. / Special treads made of NOMEX® / Self-extinguishing after the contact to a flame / Good chemical resistance against weak acids and alkalis / Gütermann K is a long staple spun sewing thread / The benefits of the long staple spinning technique are uniformity and high breaking strength / The benefits of the long staple spinning technique are uniformity and high breaking strength.

Outdoor textiles are expected to last for many years. Gütermann offers a special thread made of polytetrafluorethylene (PTFE). This product has very good temperature-, ultra-violet light and chemical resistance and its shows high breaking strength and abrasive resistance. Sun, rain, wind and weather are particularly hard on outdoor textiles. Seams are placed under the most severe strain, and quickly lose their resilience and firmness under the influence ofUV radiation and extreme weather conditions. Functional capabilities of standard sewing threads lessen if permanently exposed to outdoor conditions by up to 50 percent in the firstyear; but Gütermann PTFE 30 shows its strength. 100% PTFE / best temperature, ultra-violet light and chemical resistance / insensible against acid rain / High breaking strength and abrasive resistance