Strand - Import export

Using EZ-Splice® belt joining strand during installation will dramatically extend your belt life! Belt installations that are rushed and improperly made are often the cause of belt breakage and downtime. EZ-Splice® is a pre-formed, pre-bent joining strand that requires no bending or weaving during installation. This helps to prevent any weak spots in the belt joint.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • For cutting hard and soft wires • Cutting edges inductively hardened • Serrated inside jaws • Ergonomic angled head • Integrated ring spanner • With opening spring and catch • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • The ergonomic design of the pliers reduces work fatigue and also protects tendons and joints of the user • Made of tool steel, forged, oil-hardened

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

Several bunched single wires or bundles made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.005 mm² to 630 mm². Those single wires do not hold a fixed position inside the strand. Their position relative to one another undergoes a permanent change along the entire length of the bunch. The construction of a bunch is derived from the cross-section required, which leads to the electrical conductor featuring a certain resistance level. Different cross-sections with the same resistance value can be generated by applying single wires of varying sizes. Owing to their good efficiency our bunched single wires are versatile in a multitude of applications in cables and conductors.

Strands with a concentric structure made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 630 mm². The individual wires are subject to an exact positioning around a core wire, which ensures an all-out uniform structure. Concentric strands are particularly appropriate for thin-gauge coating with high-grade isolation materials (extrusions). 7-end strands are especially suited for data cables with high frequencies of transmission. The technical qualities of a concentric strand can be extremely well and accurately customized by combining several different alloy wires.

Semi-concentric or concentric strands with very short lay lengths and an extraordinarily smooth surface made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 16 mm². LEONI has had its manufacturing process specifically dedicated to this type of product patented. LEONI smooth bunches boast an exceptionally compact and precise round structure and have a very good Flex life. They are particularly suitable for moving applications and for thin-gauge coating with high-grade isolation materials benefitting from a long flex life as well as weight and space efficiency.

Strands with a semi-concentric structure made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.03 mm² to 16 mm². The individual wires are subject to an exact positioning, yet without an additional core wire, which ensures an all-out uniform structure. Concentric strands are particularly appropriate for thin-gauge coating with high-grade isolation materials (extrusions). The technical qualities of a semi-concentric strand can be extremely well and accurately customized by combining several different alloy wires.

The trimming saw is installed downstream of the last surface-layer mat former, cutting the strand mat precisely to the required width. Two motor-adjustable saws, one each located on either side of the belt, cut the strand mat to the dened width. The trimming waste is discharged through a hopper and recycled to the mat former bins. Features Motor-adjusted saw blades incl. distance measurement Movable mat edge retainers to ensure high-quality cuts Lateral pressure rollers ex saw compact and smoothen the mat edge Movable extraction system adjustable to mat thickness Advantages Recipe-related adjustment of all adjustable axes Eective strand extraction

Compacted material terminals made from Cu-ETP1 and Cu-OF1, in bare and tin-plated, nickel-plated and silver-plated upon request, in hard or soft annealed. Cross-section ranging from 1 mm² to 95 mm² depending on welding area. Compact welded terminals of different copper strands can be automated processed. A production of individual parts is possible as well as large-scale production. Resistance welded strands by LEONI are particularly suitable for high-voltage battery connectors, for high power connectors, for switch contacts and for special applications.

High-flexible round strands and ropes made from Cu-ETP1, Cu-OF1, aluminium and LEONI Histral® alloys (upon request) in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 630 mm² (bigger cross-sections upon request). High-flexible round strands and ropes are mainly suitable for earthing straps, connectors, conductors for low-voltage lighting and for welding technology.

ELKY special cables pass a strict manufacturing and cleaning process, in accordance with medical industry standards. Fundamentally, we only supply low twist and low tension wires and cables with a clean, high sheen, regular surface finish. We deliver manufactured products with extruded insulation made from bio-compatible materials. As well as the standard materials 1.4301 (AISI 304), 1.4310 (AISI 301), 1.4401 (AISI 316), 1.4404 (AISI 316L) and 1.4441 (AISI 316LVM), all other cabling materials authorised for use can be supplied coated and un-coated. Applications: - Guide cables e.g. for stomach tubes - Hollow cables - Strands for Temporary Myocardial Pacing Wires (monopolar, bipolar and quadripolar) - Surgial cutting strand for example for sternal closure - Strands for vein eraser - Surgical cutting strands - Wire and cables for endoscopic applications - Wire and cables for orthopaedic applications