Stops - Import export

Blocking valves control the opening and closing of piping systems. They control the inlet, flow or outlet of liquids and gases. Flow valves regulate the volume flow of the fluid used. We have throttle valves, throttle check valves, check valves and stopper valves. Furthermore we offer quick relief valves, toggle lever valves, compact pressure controllers and functional connectors. All mentioned blocking and flow valves are available in various sizes, materials, and pressure, flow and temperature ranges.

safety pilot, thermocouple, air regulation, stop-cock, pilot flame

The stop screws are screwed into the thread (option) of the guide rails. An attached rubber cap dampens the stop. For rail lengths with initial hole dimensions below L11 min. we deliver the drilling pattern offset by half a drilling jump.

The sliding gate valve type 8041 in the short design is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant design. This sliding gate valve with its small stroke achieves a very high cycle capacity combined with extremely fast cycle times. Metal bellows Limit switch Pilot valve Stroke limitation . . .

The sliding gate valve type 8040 in reinforced design and long construction is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. This sliding gate valve with its small stroke achieves a very high switching capacity with extremely short switching times.

The sliding gate valve type 8040 in the long design is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. This sliding gate valve with its small stroke achieves a very high switching capacity with extremely short switching times.

To make a sampling procedure reproducible, it should always be carried out under the same conditions. For this purpose, the depth stop for samplers is a helpful accessory. The depth stop can be clamped to any height of the sampler by means of a C-clamping screw. This ensures that the sampler penetrates to the same desired depth each time it is pierced. The penetration depth is thus fixed and can be precisely recorded, e.g. in a test report or sampling instructions. In addition, the depth stop can prevent accidental puncturing during sampling. The depth stop for samplers is useful in all areas where the sampling parameters must be precisely determined and defined, e.g. in the outgoing and incoming goods inspection of bulk materials that can segregate. Simply attach the depth stop for samplers to a sampling tube with Ø 25 or 50 mm and tighten with an Allen key (5 mm).

Stop valves for shutting off and locking in the event of an unintentional drop in pressure. Pneumatically unlockable, for direct installation in the cylinder air connection.

air regulation, stop cock, pilot flame

air regulation, stop cock, pilot flame

Ready-to-use solution for spraying with a proactive scent against marten bites. Can be used in engine compartments, garages and attics. Use biocidal products with caution. Always read the label or product information before use. Other sizes available on request

 • THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfu

air regulation, double lever stop cock, pilot flame

air regulation, double lever stop cock, pilot flame

double lever stop-cock, pilot flame, DIN 30665

• THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfun

• THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfun

double lever stop-cock, pilot flame

Easy-Click closure - stop-it can be opened and closed in any position - without tiresome screwing on and off. High quality material - stop-it made from the heat resistant and chemical resistant plastic PVDF. The clamp is galvanised steel. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the hose clip stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

The materials steel and aluminium ensure that the tubing clamp stop-it metal is extremly heat resistant and sturdy. The tubing clamp is available in four different sizes, for hose diameters up to max. 30 mm. The tubing clamp can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the tubing clamp stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

INOX Oil Loss Stop can be used in all petrol, gas and diesel engines. Abrasion and wear will be significantly reduced ultimately leading to a reduction in oil consumption. INOX Oil Loss Stop can be mixed with all commercially available oils.

Positioning via servo motor Input of measure and quantity, push button to move carriage Display for actual value / control of measure Clamping of carriage / position control Feeding of the carriage on a steel carrier profile Integrated cable channel – accuracy ± 0,1 mm/m Manual stopper up / down Load bearing capacity 200 Kg/m, with intermediate plates and support Colour RAL 7016

The Non-Stop pallet was specifically designed for use in the automated printing industry and guarantees uninterrupted logistics processes for delivery and removal of paper stacks in all standard formats. The optimal arrangement of the bridges on the thermoformed top deck of the print shop pallet ensures a fault-free removal of stacks via the Non-Stop stacker (computing system) of the printing machine. Dimensions L x W x H: 1200 x 800 x 175 mm Weight: 20,0 kg Material: PE Load capacity: static 7500 kg, dynamic 1000 kg Colour: redbrown / black Runners: 3, welded Euro pallet with thermoformed top layer Especially designed for use with Heidelberg printing machines Materials guarantee production processes without any interruption

Whether on the conveyor belt or on the machine – when maximum safety is required, BERNSTEIN rope pull switches provide a proven and reliable technical solution.The switches can be deployed flexibly, are easy to install and convenient to handle.And most importantly: they offer maximum safety when it is needed. The SR series of safety rope pull switching devices are designed and approved in accordance with the standards IEC 947-5-5, DIN EN 60947-5-5 and ISO 13850. On actuation or in the event of cable breakage, the emergency stop switching device locks automatically and can only be reset to its initial setting by using the resetting device on the switch. • Protection class IP67 • Stable and durable plastic housing (PA 6 GV) • Can be deployed at temperatures between –25 °C and +70 °C • Flexible handling with three M20 x 1.5 cable entries • Easy installation due to the maximum connection space • Up to four positively driven NC contacts

BERNSTEIN AG manufactured SR and SRM safety cable pulling switch devices as per IEC 947-5-5, DIN EN 60947-5-5 and ISO 13850 standards. These technical demand that when 'actuation' or the act of the breakage of the cable, there is automatic lock out as the switch moves to stop position, and reset for further use.

When it comes to maximum safety on the assembly line, in the production line, or directly at the machine, the Safety Rope Pull Switches from BERNSTEIN AG are a reliable and proven solution. BERNSTEIN has added a particularly small and compact version to the product family of safety rope pull switches. Thanks to its modular design, the SRO (Safety Rope Pull) is extremely space-saving as well as being highly versatile. The modular principle has the advantage of always being able to offer exactly the right product for a specific customer application.

Unlike standard suspension system solutions with individual screens or IPCs, the CS-4000 neXt meets the requirements of the Machinery Directive by the possibility of integrating emergency stop devices. Due to its two-chamber design and clever construction, an IP65 solution can be achieved. • Flexible concept as console or column configuration • High protection class IP65 at area of closed column chamber • Internal cable routing • IPC and keyboard shelf holder can be positioned individually • IPC holder with graduated tilt control • Optional integrated control elements (to fulfil the Machine Directive 2006/42/EG) • Column of high-quality extruded aluminium sections (naturally anodised, 2-chamber column) • Customer-specific length of the column possible

PRODUCT-HIGHLIGHTS • Current status clearly visible through large LED display • Comprehensive diagnostic possibilities thanks to patented BERNSTEIN DCD Technology • Reduction of downtimes due to visible status display and extensive DCD diagnostic data • Simple wiring thanks to integrated M12 connector •OPTIONAL: Local reset function maximises user safety