Results for
BRUGGER GMBH MAGNETSYSTEME
Germany
The bar magnets are workable on both sides. On the holding surface an individual shape is possible and the adhesive force is adjustable. Bar magnets with an area for a free machining on the adhesive surface moreover offer a better wear protection compared with other bar magnets. Alternative to the standard we also offer individual solutions: » Stainless steel housing + pole shoes » Greater holding power » Greater temperature until 280 °C
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
To differentiate the otherwise identical SmCo series the NdFeB bar magnets are coloured blue on the holding surface. Direct mounting of the bar magnet in iron reduced the holding power by up to 15% due to magnetic short circuiting. To avoid this, certain distances need to be maintained between the brass casing of the bar magnet and the iron. The distances are also to be adhered to if the bar magnet was shortened by dimension A. Please refer to the above column for recommended distances (distance mm). The holding surface is ground and therefore not galvanised. Alternative to the standard we also offer individual solutions: » Stainless steel housing » Housing completely galvanised to better corrosion protection » Greater holding power » Greater temperature until 280 °C » Stainless steel pole shoes
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Direct mounting of the bar magnet in iron reduced the holding power by up to 15% due to magnetic short circuiting. To avoid this, certain distances need to be maintained between the brass casing of the bar magnet and the iron. The distances are also to be adhered to if the bar magnet was shortened by dimension A. Please refer to the above column for recommended distances (distance mm). The holding surface is ground and therefore not galvanised. Alternative to the standard we also offer individual solutions: » Stainless steel housing » Housing completely galvanised to better corrosion protection » Greater temperature until 280 °C » Stainless steel pole shoes
Request for a quoteEMPAC GMBH
Germany
Flutainer® offer perfect conditions for the transport and storage of liquids and paste-like goods. Additionally, they save valuable storage space, because they can be stored space-saving before they are filled and after they have been discharged. This flexible bulk container can be built up by only one person in less than one minute. Rigid containers need the same space, no matter whether they are empty or filled. Flutainer® are different: Flutainer® are only built up when they are needed, for example for liquid sugar, to store auxiliary material for textiles or powder which is sensitive to pressure. Flutainer® are made up of a fabric container on the outside and a multiple PE-inner lining, a wooden pallet, four steel poles and a stacking frame. Fields of application: Glue Dispersions Auxiliary material for textiles Dyes Squash Tomato puree Honey or liquid sugar Dust or granules sensitive to pressure Main industries: Construction industry, chemicals, pharmaceuticals, terrestrial and garden products, drinks and instant beverages, wood products and synthetic material, cosmetics, food, disposal of waste, other pet supplies, cleaning agents, components for further processing and refinement
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Permanent Magnetic Circular Chuck Type RNF with neodymium magnet system and low height are used for clamping of small and thin workpieces. Structure: — Neodymium magnet system, steel body, — Max Pole pitch 1,5+0,5mm — Holding power 80N/cm² — Magnetic field height 4mm — Pole plate wearing limit 4mm — Switch travel MAG-ENT-MAG 180° Recommendation: Fine pole circular chuck for small parts
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Permanent magnetic chucks type PMNEO-X are super strong compact chucks for heavy cutting. Parts from about 30x15x6mm are stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. The chipboard is activated via a removable hex shifter. Structure: — Double neodymium magnet system, steel body — transverse pole pitch 11+4mm — Holding power 150 N / cm2 — Magnetic field height 10mm — Pole plate wearing limit 6mm Recommendation: Super Strong chuck for milling
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of processing tools. The chipboard is activated via a removable hex shifter. PMNM palletising clamping plates are available in 3 versions: Structure: — Neodymium magnet system, steel body, — Transverse pole pitch 1.4+0.5 mm — Holding power 100N/cm² — Magnetic field height about 5 mm — Pole plate wearing limit 6 mm Recommendation: High-precision plate for grinding and eroding
Request for a quoteH. TIMM ELEKTRONIK GMBH
Germany
4 m Neoprene Grounding Cable with 2-pole Grounding Clamp on one and a Ring Terminal on the other side. Simple bonding connection suitable for unsupervised grounding. Purchase of equipment for German customers only. Please contact your local sales partner . Description Neoprene Grounding Cable 2 x 1.5 mm², 4 m long, ready for connection, with grounding clamp type EZ-1 2-pole in stainless-steel with rubber insulating sheath for simple bonding connection. The grounding clamp contacts with the upper and lower bracket, thus marked 2-pole. The grounding line is laid on one ring terminal at the other cable end. Grounding clamp with separate ATEX-Certificate for the use in hazardous areas of zones 1 and 2. The other side will be assembled with a ring terminal end M8 (both cable wires combined) and 10 cm long transparent PVC hose (10 x 13 mm) for mounting a strain-relief.
Request for a quoteH. TIMM ELEKTRONIK GMBH
Germany
Neoprene connection cable (1 x 6 mm²) with 1-pole Grounding Clamp and Grounding Plug TW 700 for Grounding Socket TW 700. Suitable for use with EKX-4 Grounding Control Device and predecessor models (EKK-3, EKN-3 and EKS-3). Description Neoprene Grounding Cable 1 x 6 mm², hereto mounted plug type TW 700 as well as Grounding Clamp type EZ1-1 pole in stainless-steel with rubber insulating sheath; with separate ATEX-Certificate for the use in hazardous areas of zones 1 and 21. Purchase of equipment for German customers only. Please contact your local sales partner .
Request for a quoteASSFALG GMBH
Germany
These Permamax permanent magnetic chucks from ASSFALG are suitable for heavy clamp-lifting processing. These Permamax permanent magnetic chucks can be used for milling, rotating and grinding. Considerable holding forces are still achieved on uneven and rough surfaces. They allow for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thick and large workpieces. A complete, wide transverse pole distribution (steel/brass) guarantees consistently high holding force over the entire width up to the longitudinal sides. These clamping plates can be activated through a hexagonal switch lever.
Request for a quoteASSFALG GMBH
Germany
These permanent magnetic clamping plates Permamax from ASSFALG are suitable for heavy clamp-lifting processing. These Permamax permanent magnetic clamping plates can be used for milling, drilling, grinding and slicing. Considerable holding forces are still achieved on uneven and rough surfaces. They allow for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thick and large workpieces. A complete, wide transverse pole distribution (steel/brass) guarantees consistently high holding force over the entire width up to the longitudinal sides. These clamping plates can be activated through a hexagonal switch lever.
Request for a quoteASSFALG GMBH
Germany
These highly accurate Magnet Sinetables are used for grinding work as well as for eroding. It allows for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thin and fine workpieces. The permanent Microsine magnetic clamping plate is preferably used if a flat and light construction is needed during grinding, eroding or milling. A complete, fine transverse pole distribution (steel/brass) guarantees a consistent holding force over the entire width up to the longitudinal sides. This clamping plate can be activated through a hexagonal switch lever. They are available in two versions: either single-pivotable via the longitudinal axis or double-pivotable via the longitudinal and transverse axis. Gauge blocks can be used to set the tilt angle precisely up to 45 °. The magnet Sinetable is suitable for accurate grinding of workpieces with nonparallel surfaces. Individual designs can be created on request.
Request for a quoteASSFALG GMBH
Germany
This highly accurate magnetic clamping plate is used for grinding work as well as for eroding. It allows for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thin and fine workpieces. The permanent Microfine magnetic clamping plate is preferably used if a flat and light construction is needed during grinding, eroding or milling. A complete, fine transverse pole distribution (steel/brass) guarantees a consistent holding force over the entire width up to the longitudinal sides. This clamping plate can be activated through a hexagonal switch lever.
Request for a quoteResults for
Steel poles - Import exportNumber of results
14 ProductsCountries
Company type