Results for
Germany
Nahtlos, EN 10305-1 und EN 10305-4 Geschweißt, EN 10305-3 und EN 10305-2
Request for a quoteGermany
Spiral welded steel pipes used for the transport of water. Depending on requirements, they can be produced with epoxy lining and 3LPE coating. The pipes are manufactured according to the relevant standards EN 10224 and EN 10217. The wall thicknesses are between 4 mm and 25 mm. The outside diameter is between Ø 219.1 mm and Ø 2540 mm (8" - 100").
Request for a quoteGermany
Stainless steel pipes from HJS for individually adapted exhaust systems. Here you get angles, meter pieces to create an individual exhaust system or manifold.
Request for a quoteGermany
Our stainless steel pipes offer the following characteristics: pipe ends deburred quantity delivered in accordance with customer’s specifications well and protective transport packed
Request for a quoteGermany
The advantages to you: no more deformation of roundness when cutting bends on site easier extension-pipe/tiered pipe bend construction appealing visually pickled surface All of our pipes and pipe bends (both unannealed and annealed) are made of the following material: stainless steel pipe, material no. 1.4301 (AISI 304) longitudinal seam welded pipes hot rolled & cold rolled coils, unannealed, with or without pickling (W1) Make: IltaInox and/or Marcegaglia
Request for a quoteGermany
We can supply you with highly wear-resistant stainless steel pipe bends which have a service life 10 to 20 times longer than that of standard stainless steel pipe bends. This high degree of wear protection is required, for example for conveying fibreglass-reinforced plastic granules or similarly abrasive media. suitable for use of highly abrasive products easy installation no stepped pipe couplings and no flange connections required safe for use with food
Request for a quoteGermany
They are the pipe made by stainless steel 304,mainly use for the connector.
Request for a quoteGermany
This is a welded pipe made of stainless steel,mainly used for connect both of the two sides od the products.
Request for a quoteGermany
Elbows and connections made of steel and stainless steel for oil, gasoline and air hose lines. The connections are pressed onto the assembled hose.
Request for a quoteGermany
Volume booster for large pneumatic actuators to reduce the positioning times. Simple and universal mounting possible with NAMUR mounting plate. Through adjustable gain, the booster can be adapted to the capacity of the actuator.
Request for a quoteGermany
Strainer for protecting downstream plant components against contamination. All parts in contact with the media are made from stainless steel, therefore it is also suitable for aggressive media.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
Stainless steel tubes have become an indispensable part of everyday life. We hold onto them on the bus or use them as railings in houses. In the furniture industry, stainless steel tubes are used as wardrobe rods and as components for furniture. In their largest form, they serve as pipelines for oil and gas.
Request for a quoteGermany
If you want to build a twoflow exhaust system, you need a Y pipe. There are Y pipes with three equal pipe diameters or as Y reducers.
Request for a quoteGermany
Stainless steel pipe connectors and ball joints are used for quick dismantling of two pipes. The ball joints offer the additional advantage of attaching the pipes at a special angle.
Request for a quoteGermany
Suction lances / suction tubes can be delivered in different diameters right from stock. We also can manufacture according to your drawing and/or sketch or sample. material: stainless steel AISI 304 or aluminium AlMgSi 0.5 F22 in all common tube dimension 40.0 / 50.0 and 60.3 mm right from stock special versions can be realised at short notice and for short delivery
Request for a quoteGermany
Suction lances / suction tubes can be delivered in different diameters right from stock. We also can manufacture according to your drawing and/or sketch or sample. material: stainless steel AISI 304 or aluminium AlMgSi 0.5 F22 in all common tube dimension 40.0 / 50.0 and 60.3 mm right from stock special versions can be realised at short notice and for short delivery
Request for a quoteGermany
In pneumatic conveying systems, conveying abrasive products – in particular at high conveying speeds – leads to abrasion and thus to wear in the pipe bends. In order to prevent this, the pipe bend of our highly wear-resistant DWR double-skin stainless pipe bends is encased in a second pipe bend, which creates a double-walled chamber. This acts, so to speak, as a “protective shield”: After the wear has taken place on the internal pipe bend, it fills with the product to be conveyed. When this process is completed, you are then conveying „product on product“ – and no further wear is possible! Version I: „Product-on-product” In this variant, the classic “double skin” comes into effect. not suitable for foodstuffs not suitable for material change Version II: „Lined with concrete” lined with extremely hard concrete colour: light grey not suitable for foodstuffs also available: lined with borosilicate glass
Request for a quoteGermany
Stainless steel pipe couplings have the following product characteristics: food safe, UV-resistant temperature-resistant up to +80°C with grounding strip
Request for a quoteGermany
Our speciality are thin-walled pipe-bends with large bending radius, especially for pneumatic conveying systems. The pipe-bends are cold-bent without any pleats on CNC-mandrel machines. Our quality management generally guarantees: welded seam smoothed or shaved (DIN 11 850 resp. DIN 17 457) absolutely wrinkle-free, no start-up bulges no scratching or scoring extremely low ovality visually aesthetic surface leg extension each side deburred sawing edges
Request for a quoteGermany
Along with highly wear-resistant stainless steel pipe bends of type HVA NIRO® we offer suitably highly wear-resistant branch pipes. They are available in in all sizes, diameters and angle degrees.
Request for a quoteGermany
Cold-rolled (2B/IIIc) and hot-rolled (1D/IIa) in the following versions: • foil-coated • ground • brushed • bright annealed (2R/IIId) in den formats: • small format 1.000 x 2.000 mm • medium format 1.250 x 2.500 mm • large format 1.500 x 3.000 mm • as well as custom dimensions upon request Stainless steel pipes and steel bars upon request
Request for a quoteGermany
Suitable for: Steel pipes Steel waste water pipes Cast iron pipes HDPE waste eater pipes PVC, PE and PP waste water pipes Traditional product for many applications in plumbing Zinc plated version Easy installation through wide opening Forged steel nail We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team
Request for a quoteGermany
ASTM 1066 High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-mechanical Controlled Process (A1066 Gr. 50, A 1066 Gr. 60, A 1066 Gr. 65, A 1066 Gr. 70, A 1066 Gr. 80) EN 10208-1 Steel pipes for Combustible Fluids, pipes of Class A (L210GA, L 290 GA, L 360 GA) EN 10208-1 Steel pipes for Combustible Fluids, pipes of Class B (L245NB, L 415NB, L 245MB, L 555MB, L 360 QB, L 555 QB) API Spec. 5 L/ISO 3183 Steels for Line pipes PSL1 Gr.A (L210) – X 70 (L485) API Spec. 5 L/ISO 3183 Steels for Line pipes PSL2 Gr.BN (L245N) – X 60N (L415N) Gr.BQ (L245Q) – X 56Q (L390Q) X60Q(L415Q) – X80 Q (L555Q) Gr. BM (L245M) – X80M (555M) X90M (L 625M), X100M (L690M)
Request for a quoteResults for
Steel piping - Import exportNumber of results
195 ProductsCountries
Company type
Category