Steel filters - Import export

Forged parts made of steel, stainless steel and aluminum including mechanical processing. Pressed brass blanks including mechanical processing, also on rotary transfer machines. Sintered parts made of sintered bronze, sintered porous brass and stainless steel. Filter elements for air, liquids and fuel made of sintered ball material or mesh.

Advantages Parallel alignment of multiple filter cartridges enables a large filtration area on limited space Low flow speed guarantees long filter life cycle Area of application For the filtration of coolants with minor impurities Applicable as protection filter For the filtration of oil, water, condensate, chemical products and fuels Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid with Filtration degree 3-5 µm Medium oil, emulsion and water Filter material stainless steel or paper

Advantages Parallel alignment of multiple filter disks enable a large filtration area on limited space Low flow speed guarantees long filter life cycle Area of application For the filtration of coolants with minor impurities Applicable as protection filter For the filtration of oil, water, condensate, chemical products and fuels Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid with Filtration degree 3-5 µm Medium oil, emulsion and water Filter material stainless steel or paper

Weight-optimized bell probe with steel rod and integrated filter technology. This probe is included in the complete set. Extremely light, yet very robust construction for fatigue-free work. The bell probe has a dust and a water filter integrated in the lower section and is used for unpaved surfaces. When the carpet probe can no longer be used, the bell probe is used for above-ground control or for concentration measurement in the ppm range. Both probes are often carried along; the CFRP mini bell probe is ideal for this. All bell and borehole probes are available with a demountable rod to fit in the carrying case - complete set with borehole probe CFRP, bell probe CFRP and foldable carpet probe CFRP weight-optimized.

Weight-optimized bell probe with steel rod and integrated filter technology. Extremely light, yet very robust construction for fatigue-free work. The bell probe has a dust and a water filter integrated in the lower section and is used for unpaved surfaces. When the carpet probe can no longer be used, the bell probe is used for above-ground control or for concentration measurement in the ppm range. Both probes are often carried along; the CFRP mini bell probe is ideal for this. All bell and borehole probes are available with a demountable rod to fit in the carrying case - complete set with borehole probe CFRP, bell probe CFRP and foldable carpet probe CFRP weight-optimized.

We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. Microfiber multi-layer filter bags with up to 3 m² filter area Very high solids absorption capacity (up to approx. 2 kg) Extremely long service life Graded depth filtration (with integrated pre-filters) Absolute rated separation of 98 - 99.99% Guaranteed without fibre migration Fully welded seams

We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. High performance filter bag made of needle felt in PP or PES (welded/sewn version) Longer lifetime Higher dirt absorption capacity Fully welded seams Special bag filter seal Full compatibility with the entire FTJ filter housing program Production according to the highest quality standards

We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. Made of monofilament fabric (surface filtration) Optionally with plastic collar or stainless steel ring

We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. Standard filter bags made of needle felt in PP or PES Optionally with plastic collar or stainless steel ring or galvanized ring

Filter belts are used for a continuous filtration of polymer melt. These filter belts, but also wire mesh pre-cut parts, are manufactured in various dimensions and weaves. For high demands the fabrics are available with high tenacity warp wires. Plasma cut edges assure a continuous and frictionless passage of the filter belts Materials:Stainless steel, plain steel, combinations of various materials.

Measuring devices are the first step to the perfect weld. Precise purging is essential for controlling weld quality, particularly when welding high-alloy, corrosion-resistant materials that are highly sensitive to oxygen in the welding process. Oxy Smart: — Battery powered device — For inert gases — For mixed gases with hydrogen (max. 10%) — Measuring cell made of zirconium oxide (maintenance free), long lifetime through intelligent software — Robust for use at site (protective frame out of rubber) — Dust- and moisture-proof, also for use around high humidity — Intuitive operator guidance through symbols — Coloured enlighten display — Battery indicator — Fault indication in case of error Package includes: — Oxygen analyser — Charging cable with various adapter plugs for worldwide use — Hose set, 1m, incl. filter and stainless steel probe — Calibration certificate — Plastic case with inlay

The finum Tea Clicks are a clever option for closing tea filters. Simply do the following: Using both thumbs push the clip outwards (against the curve) until it opens. Place the Teabag opening into the clip and press clip to close. Place the filter into the teapot, hanging the clip on the rim of the pot. After the tea has been brewed , simply remove the clip and dispose the tea bag . Highlights made of stainless steel 13.8 cm long with a flexible chain hook that attaches to almost every teapot Packaging 1 Tea Click / sachet 150 sachets / carton 900 sachets / pallet 3 languages (DE, EN, FR)

BREWING BASKET M – The micro-fine permanent filter. The finum® permanent filters offer ample room for tea leaves to unfold and to release their full flavor. They are made of stainless-steel micro-mesh in a heat-tolerant frame from BPA-free material. These filters are durable and dishwasher-safe. The hat of the filter helps to prevent heat loss and doubles as drip-off tray. Highlights suitable for mugs & pots available in black, red, green and blue suitable for brewing tea, coffee or herbs with stainless-steel mesh suitable for brewing tea and coffee filter basket with hang-up hole BPA-free material lid serves as drip-off tray easy to clean, dishwasher-safe Packaging 1 filter / gift box 18 boxes / master carton 1440 boxes / pallet 4 languages (EN, DE, FR, ES)

STAUFF Return Line Simplex Filters SRFL-SW are specially developed for direct installation into the pipeline of industrial water cycles. Depending on their size, SRFL-SW filter housings are suitable for nominal flow rates up to 13.330 l/min / 3.300 US GPM at a maximum operating pressure of 16 bar / 232 PSI. The SRFL-SW have been designed to be used in the steel industry for pre-filtering or coarse filtering in descaling plants. For use with deminerlised water we recommend the Return Line Filters SRFL-SW in Stainless Steel. The filter element construction as a Stainless Steel basket screen filter ensures a long service life. Valves (available as an option) ▪ Drain valve Clogging Indicator (available as an option) ▪ Differential pressure gauge Filter Elements ▪ Filter elements of REL series Construction ▪ Industrial filter, designed for in-line applications in water cycles ▪ Version: Simplex Operating Pressure ▪ Max. 16 bar / 232 PSI Nominal Flow Rate ▪ Max. 13330 l/min / 3521 US...

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request Consult STAUFF for alternative materials. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids Special sizes, designs, materials and...

STAUFF RFS Carbon Steel Return Line Filters are designed as tank top or in-line filters. They are mounted directly on the tank top and if 100% of the system oil is filtered, they provide the optimum removal of contaminants from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed with a connection, threaded or flanged, for extending the return oil beneath the surface thus preventing the entrainment of air. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Filter Elements ▪ Filter elements of RE series Construction ▪ Tank top or in-line mounting Operating Pressure ▪ Max. 25 bar / 365 PSI Nominal...

Molded glass with permanent filter of long-lasting stainless steel mesh. The filter provides enough room for tea leaves to expand and develop their body. While gently steeping your tea, the hat prevents heat-loss and retains the aroma. When the brewing has finished the hat serves as a practical drip-off tray for the brewing basket. The very robust glass is ideal for hotels, restaurants and catering. Highlights molded glass easy to clean and dishwasher safe filter made from tasteless PP plastic and micro-fine stainless steel mesh hat prevents from heat-loss and serves as a handy drip-off tray for the brewing basket ø glass: 85 mm upper edge height glass: approx. 10,3 cm height filter (without hat): 7,8 cm inner diameter filter: 5,8 cm outer diameter filter: 9,5 cm Packaging 1 Set / Unit 8 Units / Case 256 Units / Palett 4 Languages (DE, FR, EN, ES)

The finum® glass systems are equipped with perfectly matching permanent filters – a simple and elegant solution for individual tea brewing. Each system comes with a hat to prevent heat loss and to serve as drip-off tray after brewing. The double-wall glass keeps your drinks hot longer. Highlights 130ml / 5oz clear with black, stainless-steel mesh permanent filter for tea leaves, coffee and herbs lid serves as drip-off tray for tea bags tasteless heat-resistant double-wall glass borosilicate glass BPA-free material easy to clean dishwasher safe Packaging 1 Hot Glass system / gift box 12 boxes / master carton 660 boxes / pallet 4 languages (DE, GB, FR, ES)

Service pressure: 0-52,5 MPa Service temperature: -40°C up to 85°C Noiseless in filling and operation direction Compact design incl. 10µ filter, checkvalve Stainless steel Ni > 13%, corrosion resistant All seals are suitable for H² EC 79 is planned The valve is equivalent of heavy metal regulation Burst pressure: > 132 Mpa, 20° Orfice diameter: 2-3 mm Inlet / outlet: acc. customer specifications Coil: 12V, IP6k9

Service pressure: 0-87,5 MPa Service temperature: -40°C up to 85°C Noiseless in filling and operation direction Compact design incl. 10µ filter, checkvalve Stainless steel Ni > 13%, corrosion resistant All seals are suitable for H² EC 79 is planned The valve is equivalent of heavy metal regulation Burst pressure: > 200 Mpa, 20° Orfice diameter: 2-3 mm Inlet / outlet: acc. customer specifications

Service pressure: 0-30 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Compact design Stainless steel, corrosion-resistant The filter is equivalent of heavy metal regulation Filter size in µ : 50 Inlet / outlet: acc. customer specifications High flow, noiseless Filter with 50µ has a free flow area = 75mm 2

Service pressure: 0-30 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Compact design Stainless steel, corrosion-resistant The filter is equivalent of heavy metal regulation Filter size in µ : 50 Inlet / outlet: acc. customer specifications High flow, noiseless Filter with 50µ has a free flow area = 28mm 2

MSE stainless steel filter presses comply with the high hygiene and purity standards both in design and processing. With the stainless steel filter press, all components in contact with the product are covered with high-quality stainless steel. This also provides optimum protection against corrosion. FDA-COMPLIANT SOLID-LIQUID SEPARATION WITH THE MSE STAINLESS STEEL FILTER PRESS A large number of materials with different properties are used in the food sector in particular. Here, especially care must be taken to ensure that no ingredients are released into the food. The law stipulates a FDA certification for this. Accordingly, all materials used must be FDA-certified. The FDA certification stands for high purity and durability. Each component such as the filter plates, filter cloths and piping systems complies with the FDA guidelines. This contributes to high hygiene and safety requirements.

Flashback Arrestors / Flame Arrestors WITT flashback arrestors / flame arrestors are used to protect single cylinders, outlet points or pipelines and can be used for almost all technical gases. Through the combination of established safety elements, flashback arrestors provide protection against flashbacks and backfire. Flashback arrestors also prevent the formation of dangerous gas mixtures within the pipeline. WITT flashback arrestors / flame arrestors meet all relevant standards (EN730-1/ISO5175), with the according tests from licensing offices such as the BAM (Federal Institute for Materials Research and Testing). A 100% product control assures highest quality. The flashback arrestors / flame arrestors are mountable in any orientation and are available with all connections and in brass or stainless steel. High-quality materials and filters in the gas inlet provide long service life of WITT flashback arrestors.

Technical data Deisgn Y-strainer, body FBE-coated. Face to face EN 558-1 Row 1 Connection Flange DN25 … DN200, PN16 drilled, Flanges DN65 – PN16 will be delivered in 4-hole execution! Mounting position In horizontal pipes with below hanging top cover, observe to the flow direction! Pressure Range PN16 Temperature Range 0°C … +80°C Mesh Normal filter: Ø1,0mm, DN25 … DN65 Ø1,2mm, DN80 … DN200 Fine filter: Ø0,25mm Material Body: GGG-50, FBE-coated Cap: GGG-50, FBE-coated Filter: Stainless steel 1.4301 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

SCHÜTZE Inline-filter for all hoses. For cleaning fluids or air. Filter housing made from stainless steel . Available filter sizes : 50 mesh 100 mesh 200 mesh. Other filters on request.

AEROMetallic filters are permanent filters with layers of aluminium slit and expanded into mesh of differing densities, encased in an aluminium or galvanized steel frame. FLA9 model filters are washable type panel filters made up of 9 ply aluminium filter media in single layer or two layers, encased in an aluminium or galvanized steel frame. FLA12 model filters follow the similar construction, but use a 12 ply filter media to enhance the filtration and dust holding capacity.