Steel fabrication - Import export

The LIPP® Large Thermal Storage Tank is a customized solution to effectively store excessive heat from biogas plants, biomass heating plants, solar plants or other heat sources. The carbon steel tanks are fabricated on site with the patented automated LIPP® Welding Technology. The horizontal welding process enables the infinitely variable production of tanks up to 6,000 m³ volume with horizontal welding only. The largevolume, above ground storage tanks are fitted with all necessary safety and operation equipment. Additional, individual components according to client’s specification can be considered. The roof and wall insulation is individually adapted to local conditions. The LIPP® Thermal Storage Tanks operate at atmospheric pressure, at a temperature of up to 95° C and are suitable for use with heating water. Speciality No additional nitrogen system necessary.

Transportation of hard material in different grain sizes in wet and dry conditions. The hoses are characterized by abrasion resistance, flexibility and low bending radius. For mobile suction dredger vehicles from all major manufacturers. Individual adjustment of each type with different wall thicknesses and designs. Temperature resistant from -30 ° C to + 80 ° C. Construction: Highly abrasion-resistant tube Tension resistant fabric inlays Concealed steel spiral Abrasion-resistant, weather-resistant cover Interior smooth, exterior corrugated Optional: electrically conductive In different fixed lenghts with cuffed ends. Other versions and dimensions on request.

Suction and Pressure hose for liquid media, also with solids content. Resistant to faeces and light alkaline solutions. Suitable for use on suction vehicles and fixed-location pumping stations. Temperature resistant from -40°C to +100°C. Construction: Faeces-resistant tube Optional: Oil and petrol-resistant tube Tension and pressure-resistant fabric inlays Concealed steel spiral Abrasion-resistant cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

For road or pavement sweepers of all well-known manufacturers, espacially for suction of material like leaves and garbage. In fixed length with high service life, extraordinary flexibility and low weight. Individual voting on the specific vehicle parameters, taking into account the user requirements. Construction: Black, highly abrasion-resistant tube Tension and rot-proof fabric inlays Concealed steel spiral Abrasion-resistant, weather-resistant cover Interior smooth, exterior corrugated Cut to length with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

For road, airport or pavement sweepers of all well-known manufacturers. In fixed length with high flexibility and axial movement. Individually matched to the vehicle type involved by means of variable rubber qualities, profiles and wall thicknesses. Construction: Black or, on request, dyed, highly abrasion-resistant tube High-tensile fabric inlays Concealed steel spiral Abrasion-resistant, weather-resistant cover Interior and exterior corrugated Cut to length with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

For use on disposal vehicles. Highly flexible, stable cross-section and can be used universally as a reel hose or compartment hose. Low elongation and good vibration damping. Temperature resistant from –40°C to +100°C. Construction: Abrasion-resistant, antistatic, oil-resistant tube Tension and pressure-resistant fabric inlays Concealed steel spiral UV, ozone and weather-resistant cover Interior and exterior smooth, fabric patterned Optional: Exterior corrugated or ribbed Supplied by the roll or cut to length with fittings and/or widened hose endings. Other versions and dimensions on request.

For use as an expansion joint in suction and pressure lines. As a suction hose on suction dredgers with narrow bending radiuses. To handle fine and coarse-grained materials. Also suitable for tough transport applications of dry materials in the mining field. Construction: Highly abrasion-resistant tube Tension and pressure-resistant special fabric inlays Concealed steel rings UV, ozone and weather-resistant, abrasion-resistant cover Interior smooth, exterior deep corrugated Cut to length with built-in flanges. Other versions and dimensions on request.

For use in floating or fixed pipelines. To handle fine and coarse-grained materials with high vacuum loads. Applications: Wet dredging, sand and gravel excavation, suction dredging and gravel washing systems. Construction: Highly abrasion-resistant tube Tension and pressure-resistant special fabric inlays Concealed steel spiral UV, ozone and weather-resistant, abrasion-resistant cover Interior smooth, exterior corrugated Sections cut to length with cuffed ends and/or widened hose endings or built-in flanges. Suction dredging hoses also available with enhanced vacuum performance for pure suction applications at customer request. Other versions and dimensions on request.

Connection element to drain waste water from bridge structures. Highly flexible, compressible version with and without widened endings. Operation as a rule at zero-pressure. Temperature resistant from –35°C to +100°C. Construction: Tube in black, faeces-resistant quality Fabric inlays Concealed steel spiral Abrasion-resistant, weather-resistant cover Interior and exterior corrugated *) Coupling wall In fixed lengths with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

For suction of a wide range of media in the industrial field (dust, sawdust etc.). Especially flexible version for easy handling with good tensile strength and particularly small bending radiuses. Temperature resistant from –35°C to +80°C. Construction: Abrasion-resistant, electrically conductive tube Fabric inlays Concealed steel spiral UV, ozone und weather-resistant, electrically conductive cover Interior smooth, exterior corrugated Cut to length with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

To handle abrasive media at normal bending radiuses and high vacuum. The standard version for a large number of very different applications in hydraulic or pneumatic transport. Temperature-resistant from –35°C to +90°C. Construction: Abrasion-resistant, antistatic tube Optional: Embedded copper wire Tension and pressure-resistant fabric inlays Concealed steel spiral UV, ozone and weather-resistant cover Interior and exterior smooth, fabric patterned Sold by the roll or in fixed lengths with cuffed ends and/or widened hose endings. Version without spiral also available. Other versions and dimensions on request.

The universal hose to handle fatty (especially animal and vegetable fats/oils) and non-fat foods. Also for conveying alcoholic and non-alcoholic beverages and fruit juices. Construction: Light-coloured NBR tube Tension and pressure-resistant fabric inlays Concealed steel spiral Blue abrasion-resistant, weather-resistant Optional: black, light or red cover Optional: Embedded copper wire Interior smooth, exterior fabric patterned Suitable for CIP and conventional cleaning, brief steam cleaning up to 130°C All food qualities used by SIMON meet the current requirements of the German Institute for Consumer health Protection and Veterinary Medicine (BfR) and the US Food & Drug Administration (FDA). Supplied by the roll or cut to length. Also available without spiral or in reinforced version to transport abrasive foodstuffs. SIMON food quality hoses are available with built in fittings using the SIMON – Vulkofix method on request. Other versions and dimensions on request.

For all types of mineral oil products, especially technical oils and lubricants, petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with an aromatic content up to 50%, diesel fuels, heating oils based on mineral oil. Highly flexible and robust finish. Temperature resistant from –35°C to +90°C. Conforms to DIN EN 12115. Construction: Oil and petrol-resistant, conductive NBR tube Tension and pressure-resistant fabric inlays Concealed steel spiral Optional: Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned Supplied on rolls or cut to length. Other versions or dimensions on request.

SOLUTION TO EFFECTIVELY STORE EXCESSIVE HEAT FROM BIOGAS PLANTS – FROM 2,000 TO 6,000 M³ The LIPP® Thermal Storage Tank is a customized solution to effectively store excessive heat from biogas plants, biomass heating plants, solar plants or other heat sources. The carbon steel tanks are fabricated on site with the patented automated LIPP® Welding Technology. The horizontal MAW welding process enables the infinitely variable production of tanks up to 6,000 m³ volume with horizontal welding only. The large volume, above ground storage tanks are fitted with all necessary safety and operation equipment. Additional, individual components according to client’s specification can be considered. The roof and wall insulation is individually adapted to local conditions. The LIPP® Thermal Storage Tanks operate at atmospheric pressure, at a temperature of up to 95° C and are suitable for use with heating water. No additional nitrogen system necessary.

The automatic mitre bandsaws from BEHRINGER are saws to really get things moving. Particularly when it comes to classical series production such as cutting to fixed lengths and mitre sawing in automatic mode. And also when cutting layers and packages they make a good impression. By their excellent cutting performance and short nonproductive times, your productivity can be increased significantly. Using an NC controlled feed gripper in conjunction with an NC controlled saw frame mitre box, fully automatic mitre cuts can be performed on both sides. The PC control system provided as standard makes for extremely simple menu-prompted operation of the saw and peripheral devices. The BEHRINGER mitre bandsaws contain many useful features already in the basic price: - Convenient PC control - Fast NC-controlled mitre system - Vertical clamping unit - NC-controlled feeding gripper with 3.000 mm feeding length in single stroke - Spray mist cooling system

FX-VV is the lifting magnet for profiles and hot components. The long, narrow design is conceived to pick up beams and profiles, also on the inner web of the beam, and reach their maximum holding force even with comparatively thin material thickness, so that even thin sheets can be lifted safely. Thanks to the 90° double prism, angle profiles can now be can now be picked up on the inside and outside, or components can be turned. Steel fabricators rely on FX-VV.

The finum® permanent filters offer ample room for tea leaves to unfold and to release their full flavor. They are made of stainless-steel micro-mesh in a heat-tolerant frame from BPA-free material. These filters are durable and dishwasher-safe. The hat of the filter helps to prevent heat loss and doubles as drip-off tray. Highlights heat resistant plastic frame with stainless-steel fabric dishwasher safe extra tasteless materials lid doubles as a drip-off tray set comes with one blue and one green filter height (without lid): 7,3 cm inner diameter: 6,0 cm outer diameter: 7,0 – 9,7 cm Packaging 2 filters / pack 12 packs / master carton 720 packs / pallet 4 languages (EN, DE, FR, ES)

For the production of conveyor belts with steel-cord or fabric layers, Siempelkamp oers a multi-cylinder down-stroke press including 2-track production. Conveyor belts having a width of up to 3,200 mm and a thickness of up to 50 mm can be manufactured at a pressure of 400 N/m2. To this end, Siempelkamp's multi-cylinder presses provide a pressure distribution previously unattainable with hydraulic-mechanical press systems. In addition, the thickness tolerances of the conveyor belts could be reduced here compared to traditional press concepts. Services Conveyor belt thickness starting at 5 mm Optimal pressure distribution due to our multi-cylinder concept Material reduction by eliminating the hot platen insulation Stable press gap parallelism High safety standards Advantages Improved process safety Low material and production costs due to reduced thickness tolerances Minimal foundation requirements Ease of maintenance and long service life

SV Loader units are designed to load small vehicles from either level access or dock levellers. Ideally suited for the parcel, postal and 3PL markets, this unit is easy to use and can be combined with our BestFlex, PowerFlex or BestConnect to create a total loading solution. Construction Heavyduty construction and supporting framework make Mobile Loaders one of the most robust units of its type on the market. Shrouded Buttons To limit the damage to emergency stops, FMH Conveyors add fabricated steel shrouds to the exposed emergency stop buttons. Fully Guarded All moving or rotating parts are fully guarded to prevent entrapment and injury. Mobile Mobile Loader units are fully mobile utilising 200mm heavy duty castors. Power Mobile Loaders are normally powered via a simple 240Vac plug connection. 110Vac and 415Vac versions are available. Each unit comes with ancillary sockets to power adjoining flexible conveyors.

The Mobile Loader is designed specifically for use in premises without a raised loading dock, which makes it ideal for loading vans and other smaller vehicles. Using this unit makes your vehicle loading/unloading operation faster, safer and more efficient, and helps you comply with manual handling regulations. Construction Heavyduty construction and supporting framework make Mobile Loaders one of the most robust units of its type on the market. Shrouded Buttons To limit the damage to emergency stops, FMH Conveyors add fabricated steel shrouds to the exposed emergency stop buttons. Fully Guarded All moving or rotating parts are fully guarded to prevent entrapment and injury. Mobile Mobile Loader units are fully mobile utilising 200mm heavy duty castors.

germanBond® HS CFC-free Applications: For hot vulcanising rubber steel cord conveyor belts and fabric conveyor belts. Specifications: Colour: black Density: 0.75 g/ml Application: Brush Application quantity: approx. 150 - 200 g/m² per coat Storage requirements: dry, cool, in tightly closed buckets Shelf life: minimum of 6 months Packing units: 0.6 kg - 4.0 kg - 20.0 kg Downloads: Safety Data Sheet germanBond® HS - English [PDF] Application Instructions germanBond® HS - English [PDF]

Heating solution germanBond® HS CFC-free Universally usable solution for hot vulcanization of splices at steel cord and fabric conveyor belts made of rubber. Our germanBond® HS heating solution contains a special elastomer compound whose adhesive system significantly improves the stickiness of the connecting parts and thus contributes to an optimal splicing strength. Applications: such as in the vulcanization of conveyor belt splices and conveyor belt repairs. ... more