Steel drums - Import export

The HTSD-High Temperature Drum Heater is our high temperature drum heater (220 °C) and exclusively suitable for steel drums. The heating jacket is used in areas where large surfaces need heating over 90 °C. This barrel heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISD heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. The heating element of the HTSD heating jackets is sewn into a fleece made of silicone-insulated fibreglass material. The insulating outer housing consists of a binder-free mat made of textile glass. The heating element is therefore double insulated (protection class II). An optimal contact with the barrel, as well as a quick assembly and dismantling are achieved by the use of quick release buckles.

The HISDpro - Side Drum Heater is a simple yet effective silicone insulated drum heater for the heating of barrels up to 90°C. The Silicone heating jacket is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISDpro heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. These heater jackets are not only used on drums but also containers and any kind of glass-fibre reinforced plastics. They can be produced with any number of belts, e.g. to enable them to be clamped on to rotor blades.

The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. This prevents the danger of the liquid splashing while being poured from a high height – for example if the filling container is standing on the floor. The user also has both hands free while dispensing and is able to remove larger quantities conveniently. A scale with container can also be placed on the storage area so the liquid that is being dispensed can be measured accurately. The holder can be used for Bürkle pumps with discharge tube or discharge hose. Discharge hoses can easily be inserted into the foldaway fastening. Can be used for plastic or stainless steel drums.

The HSHP – Drum Heater (220 °C) is suitable for steel drums (and with restrictions also for plastic drums). The outer material is a Teflon which is released for contact with food. The material possesses high levels of chemical and acid resistance. However, products such as waxes, soaps and materials with high water content can be heated excellently as well. The drum heating jacket is lightweight, robust and free of silicone. The excellent thermal transfer properties due to the perfect fit result in homogenous temperatures. Our silicone-free high-temperature drum heater is available in the standard size of 200 liters but can also be made to customer specification.

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated muffler up to model size AODD 1" * also available in the Pure version (5234-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2

FRP - Pneumatic drum mixer The FRP is Geppert Rührtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler. Additionally we can provide you with a vessel clamp applicable for open lid drums.

FR - Electric drum mixer The FR series is a fast running electric drum mixer that can directly be mounted on 200 l steel drums with a 2“ bung hole. The mounting on the drum is done with a 2” threaded adapter with which the agitator is screwed into the bung hole. The agitator shaft is connected to the drive shaft by means of a sleeve coupling. Folding propellers are used as mixing elements, which can be inserted into the drum through the 2” bung hole when being folded. The FR series mobile mixer is delivered as a turn-key solution with an on-/off-switch with low voltage breaker and connection cable. Upon request, the FR series mixer can also be supplied with an integrated frequency inverter. Additionally we can provide you with a vessel clamp applicable for open lid drums.

The FR series is a fast running electric drum mixer that can directly be mounted on 200 l steel drums with a 2“ bung hole. The mounting on the drum is done with a 2” threaded adapter with which the agitator is screwed into the bung hole. The agitator shaft is connected to the drive shaft by means of a sleeve coupling. Folding propellers are used as mixing elements, which can be inserted into the drum through the 2” bung hole when being folded. The FR series mobile mixer is delivered as a turn-key solution with an on-/off-switch with low voltage breaker and connection cable. Upon request, the FR series mixer can also be supplied with an integrated frequency inverter. Additionally we can provide you with a vessel clamp applicable for open lid drums.

The FRP is Geppert Ruhrtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler.

Balancers are holding tools in a waiting position. The needed tools in production are always ready for use. They increase safety and ergonomics at workplace. Features: Safe suspension with freely rotating and swivelling screw-type spring hook Housing of very impact-resistant and abrasion-resistant plastic Housing cover of painted sheet steel Cable drum of high-strength, abrasion-resistant plastic High-strength special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Simplified load setting

Facts: Hose extension: A longer hose available upon request Safe suspension with freely rotating and swivelling screw-type spring hook Housing of very impact-resistant and abrasion-resistant plastic Housing cover of painted sheet steel Cable drum of abrasion-resistant plastic High-strength special suspension spring High-strength, sturdy 5 x 8 air hose Infinitely adjustable hose stop buffer CEJN quick coupling, rotating coupling for supplying the R ¼” tool Maximum operating pressure: 10 bar Air flow: 900 l/min at 6 bar Simplified load setting Safety: Closed unit Rigid, impact-resistant design Electrically insulated suspension via screw-type spring hook (freely rotating and swivelling design) Includes safety chain as fall protection Mechanism for locking the cable drum High-strength special suspension spring GS-certified

The linear movement of a flexible steel cable up to 2m long is converted into a rotary movement by a measuring drum. A return spring prevents the steel cable from sagging. The measuring drum is connected to a pulse generator, which generates two pulses every 0.1 mm offset by 90°. The measuring drum winds the steel cable in a single layer so that the resolution is independent of the position. The rope entry is protected against dirt by brushes.

-suitable for charging retention basins, depots for hazardous materials, drum stacking pallets etc. -with a towing bar -swivel castors Ø 180 mm, fixed castors Ø 80 mm -Type FHR 600 G for steel bunghole drums, steel drums with a lid, steel rolling hoop drums, plastic l-ring drums, plastic double l-ring drums, plastic drums with a lid, rectangular drums and conical drums with a lid ranging from 110 to 220 litres also open drums -individual construction on request: e.g. stainless steel for “ex”-zones in compliance with “ATEX 95”

-steel construction -spray painted or hot-dip galvanized -Load capacity in kg: 360 -Dimensions (l x w x h) mm: 1020 x 100 x 450

-4-point clamping system -release activated by the guiding rod Types available -Type 4P for 200 litre steel bunghole drums, steel drums with a lid, 220 litre plastic L-ring drums and plastic double L-ring drums -Type 4P-D for plastic drums with a lid ranging from 120 to 220 litres

-steel construction -spray painted or hot-dip galvanized -Load capacity (in kg): 300 -Dimensions (l x w x h) in mm: 768 x 200 x 419

-sturdy construction -clear line of vision for the driver -standard galvanized gripping head -rubber guard(s) to prevent damage to drum(s) -gripping mechanism screwed to frame -incredible gripping strength -can be secured to prevent slipping Types available -Type RS/M for 200 litre steel bunghole drums, steel drums with a lid, rolling hoop drums and 220 litre plastic L-ring drums -Type RS/91 for 200 litre steel bunghole drums, steel drums with a lid, 220 litre plastic L-ring drums and plastic double L-ring drums, with wide drum rim edge

Clamp 124151 data of the Tension rings 1.5 mm, verzinkt, überlappt Diameter 571 mm Application Metallfässer

Clamp komplett in Materialstärke 2mm data of the Tension rings verzinkt, DX 51, 100mm überlappt, 2 mm Diameter 571 mm Application Metallfässer, flüssigkeitsdicht

Clamp 124510, flache Bauhöhe data of the Tension rings verzinkt, DX 51, überlappt, 1.2 mm Diameter 571 mm Application Metallfässer

Clamp 124151 data of the Tension rings DX 51, 1 mm, nicht überlappt Diameter 571 mm Application Metallfässer

Clamp 123943 data of the Tension rings verzinkt, 1 mm, nicht überlappt Diameter 400 mm Application Metalfässer

Clamp 124431 data of the Tension rings 1.5 mm, verzinkt, überlappt Diameter 589 mm Application Metallfässer

Clamp Ozen 134260 rechts Ozen 134261 links data of the Tension rings Material: DX 51, 1mm Diameter 571 mm Application Metallfässer

Clamp 123943 data of the Tension rings Verzinkt, DX 51, 1 mm, überlappt Diameter 330 mm Application Metallfässer

Clamp 123943 nach DIN 6644 data of the Tension rings 1.25 x 26 mm, DX 51 Diameter 360 mm Application Metalltrommel

Clamp 124242 data of the Tension rings 40 x 1.5 mm, sendz. verzinkt, überlappte Ringenden Diameter 571 mm Application Rekonditioniertes Stahlfass

3.1 / 01 Stainless steel hopper type 60 The symmetrical stainless steel hopper type 60 has an angle of 60" and is available for all Mueller drums. Deep-drawn lid rims, pressed cones, butt-welded seams and patented stainless steel valves with clamp closing and hand lever represent Müllers high quality. All parts inside and outside are polished and brushed to a 320 grit. Hopper for Müller drum type 60 3.1 / 02 Stainless steel hopper type 90 The symmetrical stainless steel hopper type 60 has an angle of 90" and is available for all Mueller drums. Deep-drawn lid rims, pressed cones, butt-welded seams and patented stainless steel valves with clamp closing and hand lever represent Müllers high quality. All parts inside and outside are polished and brushed to a 320 grit. Hopper for Müller drum Type 90 3.1 / 03 Stainless steel hopper type AS The stainless steel hopper type AS is asymmetric and is available for all Mueller drums. The...

7.8 / 01 Accessories for stainless steel drums 7.8 / 02 Drum tuck 7.8 / 03 Discharge aids for hoppers