Standard parts - Import export

Korrodin offers you the entire range of ISO and DIN standard parts for fastening technology. We procure every DIN or ISO part in connection with the connection technology. Whether screws, washers, nuts, grooved pins, cylinder pins and many more.

Overview for E2/000 advantages Other information Series EF2.21 Inner height hi: 21 mm Inner widths Bi: 25 - 50 mm bending radii R: 35 - 180 mm Pitch: 33.3 mm E-Chain®, snap-open along the outer radius Series 1500 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the outer radius Series 1400 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the inner radius Series 1450 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Half energy tube, snap-open along the inner radius Series 1480 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Full energy tube, snap-open along the inner radius Series 2500 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the outer radius Series 2400 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the inner radius Series 2450 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 100 - 250 mm Pitch: 46 mm Half energy tube, snap-open along the inner radius Series 2480 Inner height hi: 25 mm Inner widths Bi: 38 - 103 mm bending radii R: 100 - 250 mm Pitch: 46 mm Full energy tube, snap-open along the inner radius Series 2700 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the outer radius Series 2600 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the inner radius Series 2650 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 100 - 250 mm Pitch: 56 mm Half energy tube, snap-open along the inner radius Series 2680 Inner height hi: 35 mm Inner widths Bi: 50 - 100 mm bending radii R: 100 - 250 mm Pitch: 56 mm Full energy tube, snap-open along the inner radius Series 3500 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the outer radius Series 3400 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the inner radius Series 3450 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 150 - 300 mm Pitch: 67 mm Half energy tube, snap-open along the inner radius Series 3480 Inner height hi: 45 mm Inner widths Bi: 75 - 115 mm bending radii R: 150 - 300 mm Pitch: 67 mm Full energy tube, snap-open along the inner radius Series 255 Inner height hi: 24 mm Inner width Bi: 25 mm Bending radii R: 55 - 250 mm Pitch: 27.8 mm E-Chain®, snap-open along the outer radius CRC series. 255 Inner height hi: 24 mm Inner width Bi: 38-103 mm Bending radii R: 150 - 250 mm Pitch: 27.8 mm e-chain® Series CRC. 255 Assembly tool E"2/000 e-chains® - quick opening with assembly tools. Assembly tool Overview E2/000 bow chains Two-part - the E2 standard as clamp chain version Overview E2/000 bow chains ESD classification: Electrically conductive ESD/Atex versions on request IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0 UL94 V0 classifications on request 46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0 iF Design Award for the E2/000 series EF2.21 Overview for E2/000 advantages Other information Series EF2.21 Inner height hi: 21 mm Inner widths Bi: 25 - 50 mm bending radii R: 35 - 180 mm Pitch: 33.3 mm E-Chain®, snap-open along the outer radius Series 1500 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the outer radius Series 1400 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the inner radius Series 1450 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Half energy tube, snap-open along the inner radius Series 1480 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Full energy tube, snap-open along the inner radius Series 2500 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the outer radius Series 2400 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the inner radius Series 2450 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 100 - 250 mm Pitch: 46 mm Half energy tube, snap-open along the inner radius Series 2480 Inner height hi: 25 mm Inner widths Bi: 38 - 103 mm bending radii R: 100 - 250 mm Pitch: 46 mm Full energy tube, snap-open along the inner radius Series 2700 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the outer radius Series 2600 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the inner radius Series 2650 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 100 - 250 mm Pitch: 56 mm Half energy tube, snap-open along the inner radius Series 2680 Inner height hi: 35 mm Inner widths Bi: 50 - 100 mm bending radii R: 100 - 250 mm Pitch: 56 mm Full energy tube, snap-open along the inner radius Series 3500 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the outer radius Series 3400 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the inner radius Series 3450 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 150 - 300 mm Pitch: 67 mm Half energy tube, snap-open along the inner radius Series 3480 Inner height hi: 45 mm Inner widths Bi: 75 - 115 mm bending radii R: 150 - 300 mm Pitch: 67 mm Full energy tube, snap-open along the inner radius Series 255 Inner height hi: 24 mm Inner width Bi: 25 mm Bending radii R: 55 - 250 mm Pitch: 27.8 mm E-Chain®, snap-open along the outer radius CRC series. 255 Inner height hi: 24 mm Inner width Bi: 38-103 mm Bending radii R: 150 - 250 mm Pitch: 27.8 mm e-chain® Series CRC. 255 Assembly tool E"2/000 e-chains® - quick opening with assembly tools. Assembly tool Overview E2/000 bow chains Two-part - the E2 standard as clamp chain version Overview E2/000 bow chains IPA Classification Report IG 1303-640-1, tested 1500.050.038.0 at v = 0,5 / 1,0 / 2,0 ISO Class 2, according to DIN EN ISO 14644-1 E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links, filling of the E-Tubes. Assembly Instructions System E2/000 Recommended installation accessories Application examples Applications in various industrial sectors and in the igus® test laboratory. System E2/000 The E2 standard Quickly opened from the right or left with a screwdriver or by hand - opening mechanism accessible from above Lightning fast installation using thumb - safe seat without additional closing mechanism The separators and interior separation sit safely, even when the E-Chain® is open Excellent mechanical stability; design and material provide long service life Typical industrial sectors and applications General construction machinery Materials handling technology Construction machinery Wood machines Machine tools Glass machines Plastic machines Long travels Semiconductor Theater and entertaining industry Vehicles And much more ESD classification: Electrically conductive ESD/Atex versions on request IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0 UL94 V0 classifications on request 46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0 iF Design Award for the E2/000 series EF2.21

The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4026-45H. Dimensions and tolerances depend on the current status of the standard. The threaded pins with hexagon socket have a universal thread and are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts. Moreover, through the universal thread, they benefit from a continuously adjustable magnetic attachment point.

Turned parts, CNC turned parts, long turned parts Part diameter: 0.3 to 200 mm Parts Length: 1000 mm Materials: steel, stainless steel, brass, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

Turned parts, CNC turned parts, long turned parts Part diameter: 0.3 to 200 mm Parts Length: 1000 mm Materials: steel, stainless steel, brass, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

Thickness and strength: 0.3 to 100 mm Parts length: to 500 mm Materials: steel, stainless steel, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc

The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4017-8.8. Dimensions and tolerances depend on the current status of the standard. Hexagon screws are suitable for being tightened with an open-end spanner. This is a special advantage in comparison to our round flat pot magnets, which only can be screwed on by hand. The hexagon screws are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts.

STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc

STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

Test bench couplings are applied in miscellaneous test benches. By reason of manifold, specific requirements TOK system is designed according to the modular design concept, to be applicable on almost every engine test bench. For specific requirements, e.g. special-test benches, the standard parts can be combined with specific-designed parts to derive solutions corresponding to individual conditions. Advantages of the TOK-ZW coupling system: Lowest possible torsional stiffness utilizing two flexible elements Simple adjustment of the torsional stiffness by changing of elements Compensation of axial-, radial- and angular misalignment Self-centering, backlash-free and maintenance-free Flanges adapted to DIN or SPICER bolt patterns, respectively on demand Variable installation lengths utilizing telescopic spacer shafts Ideal for highest speed Lowest possible weight by using high-tensile aluminium and CFRP We are glad to see that you are interested in our product line and are happy...

Just as with the solid wood items, we can also accommodate many customer preferences for round wood veneer furniture parts. We manufacture the parts according to your specifications and use the materials you want Lamella, hardboard, particle boards, bendable plywood, specific wood veneers and edges, or we will work according to a given pattern and use our own discretion. Here again, our 5axis CNC moulding machines ensure precision workmanship. Edge processing, borings and mouldings are part of our standard repertoire in the 3D area, too.

The Datapaq AutoPaq is a customized thermal profiling system for temperature monitoring of paint, adhesive and sealant cure processes used in the automotive assembly market. Offering up to 20 channels of measurement in a single system, the AutoPaq is the perfect tool for performing detailed cure validation of new installations or optimizing existing lines for new models. With real time RF capability, the system may also be the preferred choice for routine live monitoring of paint operations as part of standard QA procedures. For detailed information and specifications, download the AutoPaq brochure. To learn how the AutoPaq can benefit your operation, download the 3 Key Wins document. Datapaq CoilPaq Thermal Profiling System The Datapaq CoilPaq is used in surface coating lines to monitor the temperature profile of the coil strip at various points across its width, as it is fed through the oven. The design of the CoilPaq allows you to place this instrument

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. Typical main areas of application therefore include: — When normal resistors prove to be too large scale — For test and calibration of resistance measurement devices — For tests on electrical temperature measuring equipment — For laboratory setup of a Wheatstone bridge — As shunt resistor for accurate current measurement — As part of standard equipment in research laboratories — For a large part of measurements in calibration laboratory. Features: — Range 10 μΩ ... 100 kΩ — Low capacitance and low inductance design — Suitable for direct current and technical frequencies — High stability < ± 0.01 % over years

THE MULTI-SPINDLE SHAFT DRILLING MACHINES OF THE TBM roto series ARE DESIGNED FOR PERMANENT PRODUCTION USE. THEY ARE PARTICULARLY DURABLE, EXTREMELY ROBUST AND GUARANTEE THE HIGHEST PRECISION: 24/7/365! TBM roto – shaft drilling machine for production For machining rotationally symmetrical workpieces such as gear shafts, camshafts, steering rods, common rails, standard parts... Customer-specific solutions, automation, handling, workpiece clamping, workpiece cleaning… Long-lasting machines for parts with the highest precision Additional units, features or modules available Optimized accessibility to all components for maintenance and service

A flue gas heat exchanger is part of the standard equipment for energy-optimised and environmentally friendly boiler operation. — Effective heat recovery and reduction of flue gas losses — Maximum efficiency gain when using condensing technology — Fuel savings of up to 7%, or up to 15% when using condensing technology — Intelligent control for a long service life and high level of efficiency — Compactly integrated into the boiler or as a stand-alone version for simple retrofitting

The GEMÜ C60 CleanStar ultra pure 2/2-way diaphragm valve has a plastic piston actuator and is pneumatically operated. A stroke limiter and an optical position indicator are integrated as standard. All medium wetted parts are made of PVDF or PTFE. —High purity due to cleanroom manufacturing —High Flow version —High flow rates —Minimal deadleg —Optional flow direction —Also available as T valve —The valve is available with ECTFE union nut as an option. Thus you achieve: brief equipment rinsing times, clearly improved Kv values (High Flow), high "MTBF" and reduced costs

The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.

The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.

DATAPAQ temperature profiling systems include high-accuracy industrial-strength data loggers, analysis software, thermal barriers, and thermocouples. DATAPAQ AutoPaq is a customized thermal profiling system for temperature monitoring of paint, adhesive and sealant cure processes used in the automotive assembly market. Offering up to 20 channels of measurement in a single system, Datapaq AutoPaq is the perfect tool for performing detailed cure validation of new installations or optimizing existing lines for new models. With real time RF capability, the system may also be the preferred choice for routine live monitoring of paint operations as part of standard QA procedures. Range of silicone-free barriers providing safe and contamination-free options to suit single and multi-run operations Oven Insight Professional software written for the automotive paint engineer to perform process QA or full validation quickly, efficiently and accurately

Performance The patented STAUFF Form tube forming system is without doubt one of the most high-performing solutions currently available on the market for connecting metric sized tubes. Apart from its simplicity, it also provides a maximum level of safety, reliability and reproducibility. STAUFF Form has been designed as standard for seamless cold-drawn precision steel tubes as well as stainless steel tubes with dimensions between 6 x 1.5 mm and 42 x 4 mm in the Light Series and between 6 x 1.5 mm and 38 x 6 mm in the Heavy Series. Parameters for alternative materials (copper, brass, CuNiFe, Tungum etc.) can be added by the manufacturer, if required. System Design and Components The system is based on standard parts and consists of only four key components: The STAUFF Form Ring with an integrated and thus undetachable elastomeric sealing is slid onto the tube end, which has previously been mechanically contoured. This creates a positive-locking connection that provides a...

STAUFF High Pressure Filters type SF-SM are designed for manifold block mounting in hydraulic and lubrication applications, with a maximum operating pressure of 315 bar / 4.560 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ High pressure filter designed for manifold mounting ▪ Threaded mounting holes and fluid ports on side of head ▪ Option of standard or two-part top loader version Operating Pressure ▪ Max. 315 bar / 4.560 PSI Nominal Flow Rate ▪ Max. 1.135 l/min / 300 US GPM Materials ▪ Filter head: Spheroidal Graphite Cast Iron ▪...

STAUFF High Pressure Filters type SF-TM are designed for manifold block mounting in hydraulic and lubrication applications, with a maximum operating pressure of 315 bar / 4.560 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ High pressure filter designed for manifold mounting ▪ Threaded mounting holes and fluid ports on top of head ▪ Option of standard or two-part top loader version Operating Pressure ▪ Max. 315 bar / 4.560 PSI Nominal Flow Rate ▪ Max. 1.135 l/min / 300 US GPM Connection ▪ BSP Materials ▪ Filter head: Spheroidal...

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps in addition to clamps in the Heavy Series and the Twin Series according to German Industry Standard DIN 3015 (Parts 2 and 3), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 42 mm / .24 inch to 1.65 inch. Clamp bodies manufactured from various thermoplastics – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions.

STAUFF High Pressure Filters type SF are designed for in-line hydraulic and lubrication applications, with a maximum operating pressure of 420 bar / 6.000 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ High pressure filter designed for in-line assembly ▪ Threaded mounting holes on top and fluid ports on side ▪ Option of standard or two-part top loader version Operating Pressure ▪ Max. 420 bar / 6.000 PSI Nominal Flow Rate ▪ Max. 1.135 l/min / 300 US GPM Connections ▪ Option of BSP, NPT, SAE thread or SAE flange (ISO...