Stainless steel screws - Import export

these screws are used in different machine.

Stainless steel custom screws.

Stainless steel barrel screw joint with a R 2" steel fine outer thread for tubes dia. 32 mm.

Valve machined parts.

Valve screw mechanical accessories.

These screws are produced by automatic turining machine,custom screw fittings are mainly used in small internal parts of machinery.

electrolytical polished*stainless steel screw*capacity 0 – 80 mm*rod Ø 10 mm

The classic end clamp for modules with a frame height of 35 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 35 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 50 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

Ideal for outdoor use Easy installation through wide opening Connecting thread M10 stainless steel Stainless steel screws We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Ideal for outdoor use Easy installation through wide opening Connecting thread M10 stainless steel Stainless steel screws We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Use: Panel insert for thermocouple and RTD circuits. Mounting by means of two screws at front hole with a diameter of 22.5 mm. Ideal panelinsert for instrument cases. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.

Use: Single built-in couplings for installation in front plates, housings, etc. Attachment with two screws M 2.5. Third connection for ground or continuous shield or three wire RTD. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip/Female Body up to 33% of the Working Pressure with Tools Application Agricultural and Forestry Machinery, Construction Machinery, Industrial Hydraulic ISO Interchange ISO 14541 (BG 1-6)

This anchorage point (Ø 16 mm) and its base plate (100 x 100 mm) are manufactured completely from stainless steel. The device is simply screwed permanently onto a wooden beam. It is available in different lengths and comes with the 4 stainless steel screws required for installation. EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Min. beam dimensions: 100 mm x 120 mm Incl. installation set Add a supporting tube for usage as an end or corner post in a lifeline system

This low-cost, stainless steel roof hook has a cranked shaft - perfect for bridging the roof battens - and is secured in a few easy steps by simply screwing 2 stainless steel screws through the counter battens into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Simply screwed onto a wooden beam (min. 60 mm x 120 mm) Incl. installation materials (screw length: 160 mm length, Ø 8 mm)

wege® - the flexible cable gland system in brass, stainless steel and plastic. wege® M Pressing-screws with strain relief. Material: brass nickel-plated,screws: stainless steel, thread: M16-M32, PG9-PG29

- Metric thread - Chambered O-ring - Seals FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Seals FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Seals FPM - Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - swiveling, but not designed for steady motion of the tube

- Metric thread - Chambered O-ring - Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar) - Not designed for steady motion of the tube

- Thread metric - Chambered O-ring - Seals FPM - Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Metric thread- With hexagon socket - Chambered O-ring - Seals FKM - Material 1.4301 / 1.4307 - Temperature range: -20 to +120 °C - Pressure range: -0,95 to 16 bar - Media: Air, vacuum and liquids

- Whitworth pipe thread - Frame components with media contact: Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Frame components without media contact: Material brass chemically nickel-plated - Temperature range 32 to 176 °F (0 to +80 °C) - Working pressure range 0 to 362 psi (0 to 25 bar)

— Whitworth pipe thread DIN ISO 228 — chambered O-ring — Seals FPM — Material AISI 316L (1.4404) — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 232 psi (-0.95 to 16 bar) — Not designed for steady motion of the tube