Stainless steel rings - Import export

Mechanical parts - washers.

These are the pin ring made by stainless steel,which is the accessories used for sensor.

These the accessories used for machines.

Special properties: Slewing ring with high stiffening Simple installation, replaceable, maintenance-free sliding elements made of iglidur® J High wear resistance Available as aluminum or stainless steel version V4A (stainless steel only for PRT-01-60 and PRT-01-100) iglidur® PRT slewing ring plain bearing data d [mm]: Special properties: Suitable up to 180°C, high chemical resistance For all 5 standard dimensions of style 01 Body in aluminium or stainless steel, sliding parts in iglidur® H1 d [mm]: Special properties: Free of lubrication and maintenance. For use in extreme dirt. Corrossion-resistant Robust and ready to install Available in dimensions 60 and 100, oneside (-D) or boothside (-DD) seal d [mm]: Special properties: For use in the food industry with gliding elements made ​​of FDA-compliant iglidur® A180 instead of iglidur® J standard. Can be naturally combined with the stainless steel versions of the slewing ring bearing. Lubricant- and maintenance-free For use in extreme dirt. Ready to install Rugged and wear resistant Application areas: Food processing industry d1 [mm]: Special properties: Slewing ring with high stiffening Simple installation, replaceable, maintenance-free sliding elements made of iglidur® J High wear resistance Available as aluminum or stainless steel version V4A (stainless steel only for PRT-01-60 and PRT-01-100) d [mm]: Special properties: Suitable up to 180°C, high chemical resistance For all 5 standard dimensions of style 01 Body in aluminium or stainless steel, sliding parts in iglidur® H1 d [mm]: Special properties: Free of lubrication and maintenance. For use in extreme dirt. Corrossion-resistant Robust and ready to install Available in dimensions 60 and 100, oneside (-D) or boothside (-DD) seal d [mm]: Special properties: For use in the food industry with gliding elements made ​​of FDA-compliant iglidur® A180 instead of iglidur® J standard. Can be naturally combined with the stainless steel versions of the slewing ring bearing. Lubricant- and maintenance-free For use in extreme dirt. Ready to install Rugged and wear resistant Application areas: Food processing industry d1 [mm]: 1 Aluminum, hard anodized 2 iglidur® J sliding elements

We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. Made of monofilament fabric (surface filtration) Optionally with plastic collar or stainless steel ring

We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. Standard filter bags made of needle felt in PP or PES Optionally with plastic collar or stainless steel ring or galvanized ring

We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. Microfiber multi-layer filter bags with up to 3 m² filter area Very high solids absorption capacity (up to approx. 2 kg) Extremely long service life Graded depth filtration (with integrated pre-filters) Absolute rated separation of 98 - 99.99% Guaranteed without fibre migration Fully welded seams

We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. High performance filter bag made of needle felt in PP or PES (welded/sewn version) Longer lifetime Higher dirt absorption capacity Fully welded seams Special bag filter seal Full compatibility with the entire FTJ filter housing program Production according to the highest quality standards

Category Low pressure hoses and fittings / Industrial couplings / Tank truck-couplings / Tension ring lever / Stainless steel Product number supplier 330500055v

Stainless steel u - washer seals With centering Temperature range: - 30°C up to +100°C metallic flat seal with inner vulcanised, trapezoidal, rubber elastic seal shoulder for static sealing in ... Category Sealings / U-Seal rings / Stainless steel Product number supplier 431388v

Stainless steel u - washer seals With centering Temperature range: - 30°C up to +100°C metallic flat seal with inner vulcanised, trapezoidal, rubber elastic seal shoulder for static sealing in ... Category Sealings / U-Seal rings / Stainless steel Product number supplier 431388v

We love a challenge so we are more than happy to take on special designs. We translate your specifications into top-quality products. In order to meet the most stringent requirements, we rely on our comprehensive machine park and on the production facilities run by highly specialized partner companies. These machines have been designed to manufacture both individual items and batches without any problems. Would you like to have more detailed information on our special designs? Why not contact us directly? We will be happy to assist you. Milling of profiles Special concrete designs Rings for placing Shore test specimens Milling of dumbbell test specimens for tensile tests Multiple test specimens according to DIN 53281ff Stainless steel rings for tests according to EN ISO 10563 Spacers for standard joints according to ISO 11600 Spacers for elongation test according to ISO 11600, made of aluminum or PMMA in various % values Feed mechanisms

Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.

The requirements placed on components in the medical sector are extremely stringent, since, for example, the welds, in addition to the technical quality, must also meet the highest demands in terms of optics. For example, we produce stainless steel slideways for the slip rings of computer tomographs. We were also able to support our customers here in choosing the materials and the definition of the welded joint.

Stainless steel series – for applications where corrosion resistance and high transmissible torque is required. This new design of Shrink Disc is made from stainless steel forged rings and uses high strength stainless steel screws. These units are available from 14mm to 195mm bore. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances...

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated / screws are stainless steel, sealing ring: see data sheet, range of temperature: see datasheet, connection thread: M12 - M63 / PG 9 - PG 48

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated / screws are stainless steel, sealing ring: see data sheet, range of temperature: see datasheet, connection thread: M12 - M63 / PG 7 - PG 48

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 316 Ti, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar/IP69k, range of temperature: -40 °C to +140 °C, thread: M12-M63

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 303, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar/IP69k, range of temperature: -40 °C to +140 °C, thread: M12-M63

Waste disposal ring in stainless steel (AISI 304) for counter mounting on the top side. Deep drawn from one piece; visible surfaces satin finished and brushed. Dimensions Ø 170 x 100 mm

All tart rings and cutters are made exclusively of stainless steel 1.4301. Small Tart Rings & Cutters: round, hexagon, rhombus, oval, acute-oval shaped

Standard-Sizes Diameter 160 - 300 mm in different height. Cake Rings: aluminium, stainless steel, stainless steel adjustable Cake Ringsoctagonal, oval and heard shaped, Florentine Rings "Cobble stone" Glady we supply also special sizes.

3.6 / 01 Silo type 60 Silo type 60 is formed to a stainless steel rounded body. Calibrated edging, pressed cones, butt-welded seams and patented stainless steel valves with clamp closing and hand lever represent Müllers high quality. The clamping ring lid with filling tube allows dust-free docking. Silo Type 60 3.6 / 02 Silo type 90 Silo type 90 with symmetrical rounded body is made of stainless steel. A clamping ring lid with filling tube allows dust-free docking. It is formed with a sealing surface. The patented stainless steel valve with hand lever Type MC is continuously adjustable and guarantees easy cleaning and assembling. Silo Type 90 3.6 / 03 Silo type AS The asymmetrical stainless steel silo type AS is formed with a rounded body. Cones are pressed and all seams are butt-welded. This hopper bin with patented steel valve allows easy cleaning and assembling. All parts inside and outside are polished and brushed to a...

Suction capacity 6,000 to 11,00 m³/h The NASH 2BQ1 590 has a unique performance range. It combines a high gas flow rate (6,000 to 11,000 m³/h) with a discharge pressure range of up to 3.75 bar abs. The standard 2BQ compressor model is equipped with a duplex steel shaft, ductile iron end shields, a massive stainless steel housing and o-rings to seal housing components. Higher quality materials are available on demand by using the modular 2BE3/4 design. The NASH 2BQ1 is certified for ATEX.

Air exchange in sealed housings? No Problem! Our pressure equalisation elements (formerly Gothe & Co. GmbH) have proven themselves reliably worldwide. High temperatures and adverse environmental influences provide continuous pressure fluctuations in sealed housings – protect your sensitive electronics and improve the lifetime of electronic devices with our pressure equalisation elements. Reliable reduction of condensate formation Protection of harmful fluids and particles Special Features Flat construction Easy installation (from inside or outside) 100% Salt retention capacity Very robust Diverse versions Air passage of up to 400 ml/min Technical Data Mounting body/cap brass (optional nickel-plated, chrome-plated or stainless steel) Membrane ePTFE (oleophobic) O-Ring NBR (optional EPDM, FKM or silicone) Water ingress pressure > 0,6 bar Protection class DIN EN 60529 IP66, IP68 (installed) Acceptable temperatures - 40 °C … + 80 °C (150°C temporary)

Hand riveters are essential tools for anyone who needs to join two materials together permanently. These tools work by compressing a metal rivet through two or more layers of material, creating a secure and permanent bond. Hand riveters are used in a wide range of industries, including construction, metalworking, and automotive repair. They are especially useful when working with materials that cannot be easily welded or screwed together. Equipped with 4 heads of different sizes, Ronix RH-1604 is ready to help you in your next repair or maintenance work.

Machine, work and operating platforms from stainless steel for aseptic and hygienic application - for example in the food, beverage, pharmaceutical or chemical industry. We offer the complete package including design and static calculation, manufacturing and assembly. We guarantee stainless steel manufacturing quality made in Germany, quick throughput times and competitive pricing. We are your reliable partner for stainless steel platforms and mezzanines!

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® Bend 30° with plain ends

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® pipe Bend 90° female/male