Stainless steel locks - Import export

We use many different welding methods to produce endlessly spliced conveyor and process belts, always depending on the material and intended application. The endless splice punched finger splice stepped finger splice multilayered stepped splice conical splice The mechanical fastener Steelgrip fasteners, stainless steel Wire hooks, steel or stainless steel Polyester zip splice Self-lock fastener, stainless steel Plastic splice Nieka fastener Bonded wire hooks PVC/PU Minet fasteners

NLTR Next Axis vertical with RFID, electronic lock metal, stainless steel finish, operation by Mifare Transponder, surface mount, with pull handle, shared use, incl. strike plate 2549

NLTR Next Axis Standard RFID, electronic lock metal, stainless steel finish, operation by Mifare Transponder, surface mount, with pull handle, shared use, incl. strike plate 2549

NLSK Next Axis vertical keypad, electronic lock metal, stainless steel finish, black buttons, surface mount, with pull handle, shared use, incl. strike plate 2549

1) Modified PVC coated fabric is suited for placing heavy materials within the working space, occasional drive-in or –out scenarios and pedestrian traffic 2) Chemical resistant and withstands long-term UV exposure— great for outdoor use 3) Patented Rigid-Lock integral stainless-steel wall-support system is 30 cm deep and locks at 90° for secure, leakproof containment 4) Single-piece construction – patented Rigid-Lock wall-support system integral to berm provides unobstructed work space 5) Quick and easy setup – no assembly required

Rent our foldable berms for spill containment: 1) Modified PVC coated fabric is suited for placing heavy materials within the working space, occasional drive-in or –out scenarios and pedestrian traffic 2) Chemical resistant and withstands long-term UV exposure— great for outdoor use 3) Patented Rigid-Lock integral stainless-steel wall-support system is 30 cm deep and locks at 90° for secure, leakproof containment 4) Single-piece construction – patented Rigid-Lock wall-support system integral to berm provides unobstructed work space 5) Quick and easy setup – no assembly required

Wall distributor 5623E with 5 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half-cylinder lock, even with plugged-in standard plugs. The surface-mounted wall distributor 5623E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5620E with 2 CEE slots and a housing made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The on-wall distributor 5620E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost

Wall distributor 5606E with 6 slots. The housing of the wall distributor is made entirely of stainless steel. The door can be locked with a profile half cylinder lock and can also be closed with standard plugs inserted. The 5606E on-wall distributor is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Levers ▪ Straight and off-set design available ▪ Made of zinc, steel, stainless steel or aluminium Locking Devices ▪ Various designs and configurations available, depending on the actual type and size of the ball valve ▪ Universal field-installed devices avaibale Pneumatic Actuators ▪ Single- or double-acting Limit Switches

Specially small dimensioned self-centering Locking Assembly without axial displacement. As the locking srews are located out of the actual clamping area and the pressures are relatively low, the hub can be designed economically small. Specially small dimensioned self-centering Locking Assembly without axial displacement. As the locking srews are located out of the actual clamping area and the pressures are relatively low, the hub can be designed economically small. Tolerances We recommend the following mounting tolerances Shaft: h8; Hub: H8

Self-centering 2-piece Locking Assem­blies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. Self-centering 2-piece Locking Assemblies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. Tolerances We recommend the following mounting tolerances Shaft: h8; Hub: H8

These flange type units is made of stainless steel and fix the hub positively against their extended flange preventing axial movement during tightening. Applied wherever self-centering action and good concentricity of mounted components are essential and hubs with straight-thru bores are used. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point, preventing bending or lifting of the inner ring during assembly and thereby ensuring easy dismantling. High rotation speed – the dimensional accuracy of the RfN 7013 Locking Assemblies allows their use in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial...

Identical in design and function to the traditional 7012 device, this unit is made of stainless steel for applications requiring rust free installation. Torque capacity is somewhat reduced due to the nature of stainless steel. Slimmest design - especially suitable for applications where space is limited. The Locking Assembly RfN 7012 stainless compensates small tolerance deviations and compensates small mounting errors. Large transmittable forces and moments – several Locking Assemblies RfN 7012 stainless can be placed one behind the other. The transmissible torque and axial forces are added - please take in this respect consulting with our technical experts. Easy installation – in comparison to crosspress fits temperature treatments and fitting are eliminated. Locking Assemblies RfN 7012 stainless steel can cover a big fitting clearance. Low risk to contamination – during the tightening process the functional surfaces of the device and connection are pressed together generating...

The slit versions are useful in applications requiring the bridging of bigger tolerances and/or higher torques. Stacking of the elements is not recommended. Characteristics Customized application – by varying the number of Locking Elements, size and quantity of clamping screws, the connection can be adapted to fit most applications concerning surface pressures, materials, hub/shaft dimensions and available mounting space. Transmission of high loads – to increase the transmissible torque and axial forces up to 4 Locking Elements can be used in series. Maximum reliability – no matter whether the connection is subjected to static, pulsating, dynamic or intermittent loads. Simple manufacture – shaft and hub are designed without keyway. Apart from this, relatively large tolerances are admissible. Easy adjustability – Locking Elements work without positive connection. So they can be adjusted at any place to any position by following the simple installation and removal...

Telescopic Rail 53 x 19 mm, Stainless Steel, Standard Length 500 mm, Load Capacity up to 120 kg per pair Full Extension Ball Bearing Guide Load Capacity up to 120 kg per pair Standard Rail Length 500 mm The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.

Protect the upper thread and Data Matrix code of your ABS-Lock III-BE anchorage point from deformation through accidental hammer damage. Before hammering your anchor into place, simply screw this extension piece on top of the thread - and remove it afterwards to make room for your anchorage eyelet. Protects your ABS-Lock III-BE thread and Data Matrix code from accidental hammer damage Manufactured completely from stainless steel material

Upgrade your ABS-Lock X anchorage point for usage as a corner or end support in a lifeline system. This additional stainless steel reinforcement (Ø 42 mm) includes an energy absorber and is capable of withstanding the pre-tensioning load exerted on your stainless steel cable. Supporting tube for Ø 16 mm posts Designed for usage as a corner or end support in a lifeline system Includes an energy absorber

To prevent an ABS-Lock III anchorage point from being accidentally bent during the pre-tensioning process, it can be reinforced using one of our specially designed stainless steel ABS-Lock III Supporting Tubes (Ø 42 mm). Simply contact us to check whether your anchorage point can be upgraded prior to installation. Supporting tube for Ø 16 mm posts Designed for usage as a corner or end post in a lifeline system Includes an energy absorber

The 3C Tri-Clamp connector is easy to use: Simply press the two flange-like connector pieces against each other and fasten them together using the locking clip. A sealing ring is situated between the connector pieces to maintain a proper seal. The resulting connection is form-fit and smooth and a wing nut on the locking clip makes it easy to quickly open and close the connection at any time. The Tri-Clamp connection can be combined with a 1+, 1A or 1C flexible tube connector, a 2N pipe connector or a male thread.

Rack & pinion jack 1524 Inox Rack & pinion jack, load 0,5 t, easy functioning, self-locking worm gear, stainless steel Rack & pinion jack for lifting, lowering, adjusting and fixing of mechanical components, devices, machines etc

Rack & pinion jack 1524Rack & pinion jack, load 0,5 t, easy functioning, self-locking worm gear, also available stainless steel Rack & pinion jack 1555 Rack & pinion jack, load 1 t, easy functioning, self-locking worm gear Rack & pinion jack 1557 Rack & pinion jack for lifting, load 1 t, easy functioning, self-locking worm gear, rack inhoused

The "haacon AX" trailer supports are suitable for mounting on vehicles with air suspension. Both aluminium chassis and steel chassis are suitable for mounting. All vehicles with air suspension benefit from the weight reduction of up to 100 kg thanks to the "haacon AX" detachable supports. Operators of tipper vehicles, which often cover short distances when fully loaded, benefit in particular from being able to load more. haacon has selected a wrought aluminium alloy with high strength. Available heights are 795 mm and 995 mm. The maximum support height is 1,295 or 1,445 mm. The pendulum foot safely transfers a load of 10 t and compensates for slight horizontal movements of the trailer. The aluminium fifth wheel support "haacon AX" is free of lubricants, corrosion-resistant, maintenance-free, easy to clean and can also be cleaned with high-pressure cleaners. The downpipe is secured with a spring-loaded, captive stainless steel locking pin at 50 mm intervals.

Goodridge Lock wire is an Aircraft grade 321 stainless steel lock wire made to military specifications is perfect for positioning hoses or mounting hardware. Lock wire or safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration as well as other forces. The presence of safety wiring also serves as an indicator that the fasteners have been properly tightened. Lock wire is available in a variety of gauges and materials, depending on the application. In racing applications, stainless steel wire is used, most commonly in 0.032" in (0.81mm) diameter. Typically, the wire is threaded through a hole drilled into a fastener or part, then twisted and anchored onto a second fastener or part, then twisted again

Stainless Steel 316 or 304 Lock, with 40mm profile half cylinder,ROHS compliance

Steel or Stainless Steel versions available,with key locking or non-locking,Size:84*68mm and 127*101.5mm,Door Cutout: 72*56mm and 109*83.5mm ,Easy Installation,ROHS compliance

Steel or Stainless Steel versions available,with key locking or non-locking,Size:140x108mm，H=31.5mm，Door Cutout:115*84mm,Easy Installation,ROHS compliance

ARRI True Blue ST1 P.O., 230V, G22, without switch, with connector, incl. barndoor and filter frame ARRI TRUE BLUE represent an unprecedented evolution of the studio fixtures that have been popular workhorses for over two decades. Following extensive research and feedback from lighting professionals around the world, combined with advances in technology, ARRI has designed a series of six highly innovative lampheads with over 30 new improvements for studio and location lighting. Cross Cooling System: new, highly effective cooling streams in addition to conventional cooling Sliding Stirrup: centre of gravity adjustment Tilt Lock: stainless steel friction disc for rigid lock-off Top Latches: application-oriented Top Latches for location or studio use Adjustable Accessory Brackets: adjustable 2-scrim and 4-scrim position Stainless Steel Lens Protection: maximised light transmission and high temperature stability Extremely Robust Barndoors: made of special alloy with high strength-to-weight ratio and effective tightening function Maintenance: more shared parts, very fast access to all interior workings with three torx drivers only Improved Weather Protection / IP23: safe indoor and outdoor use Safety Certification: CE, TÜV-GS, NRTL-US-C SPECIFICATIONS > Lamp Type: CP40 / CP71 1000W 230V G22 > Lens Diameter: 175 mm > Packed Size: 460 x 400 x 400mm > Shipping Weight: 8,5 kg > Protection class: IP23 > Beam angle: 12° - 57°