Stainless steel alloys - Import export

CNC turning is a manufacturing process in which bars of material are held in a chuck and rotated while a tool is fed to the piece to remove material and create the desired shape. A wide variety of materials can be used in CNC turning, including:Aluminum, brass, bronze, copper, hardened metals, precious metals, stainless steel, steel alloys,ABS...

EZM Edelstahlzieherei Mark is traditionally a manufacturer of speciality products, whose uses also include medical equipment. To do justice to the high, specific demands on this product segment and this market, we have given these products a special status within the company. EZM offers EZM Chirusteel and EZM Chirutan products under the brand family name EZM Chiruline. In addition to placing special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

EZM Edelstahlzieherei Mark is traditionally a manufacturer of speciality products, whose uses also include medical equipment. To do justice to the high, specific demands on this product segment and this market, we have given these products a special status within the company. EZM offers EZM Chirusteel and EZM Chirutan products under the brand family name EZM Chiruline. In addition to placing special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

EZM Edelstahlzieherei Mark is traditionally a manufacturer of speciality products, whose uses also include medical equipment. To do justice to the high, specific demands on this product segment and this market, we have given these products a special status within the company. EZM offers EZM Chirusteel and EZM Chirutan products under the brand family name EZM Chiruline. In addition to placing special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

EZM Edelstahlzieherei Mark is traditionally a manufacturer of speciality products, whose uses also include medical equipment. To do justice to the high, specific demands on this product segment and this market, we have given these products a special status within the company. EZM offers EZM Chirusteel and EZM Chirutan products under the brand family name EZM Chiruline. In addition to placing special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

Niro Präzisionstechnik specializes in the manual mechanical processing and processing of thin stainless steel sheets up to 4 mm. Our specialty are funnels, composite shapes, reductions and transitions, for example from round to square. We only process non-rusting materials such as V2A and V4A stainless steel, titanium alloys and aluminum. Our production conditions allow the manufacture of products for clean room applications such as those used in the pharmaceutical industry, medical technology and in the food industry. Funnels and reducers from Ø 70 - 900 mm invisibly ground weld seams carefully smoothed transitions to avoid product buildup suitable for clean room applications uniform wall thicknesses free of tension and distortion

Dimensions Wire diameter: from 0,2 mm Spring geometry after consultation Material Stainless steel Copper alloy Customized solutions Coating Additional coatings through external services (e. g. gold-plated, silver-plated, tin-plated) Specialities Highest precision because of laser-welded spring ends Optimal contact properties because of inclined coils Automated manufacturing Customer specific packaging Rapid prototyping

Niro Präzisionstechnik specializes in the manual mechanical processing of stainless steel thin sheets up to 4 mm. Our specialty are funnels, composite shapes, reductions and transitions, for example from round to square. All connections are welded while avoiding the inclusion of oxygen, and the weld seams are made invisible through careful polishing. The workpieces are machined free of tension and distortion with uniform wall thicknesses. We only process non-rusting materials such as V2A and V4A stainless steel, titanium alloys and aluminum. Our production conditions allow the manufacture of products for clean room applications such as those used in the pharmaceutical industry, medical technology and in the food industry. Suction devices Ring suction Downpipes Nozzles machine parts Assembly

Turned parts, CNC turned parts, long turned parts Part diameter: 0.3 to 200 mm Parts Length: 1000 mm Materials: steel, stainless steel, brass, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

• THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfun

• THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfun

 • THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfu

In our new production space, we have at our disposal 30 state-of-the-art automated punching & bending machines. In addition to bent wire parts, we also produce bent strip parts here. Production to order with complex forming: Bent strip parts are produced from a broad range of materials, including for instance stainless steel, alloyed or carbon steel, brass, copper, bronze, or even K55 or K75, a specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

Exactly tailored to the respective process requirements of the devices, VersaWeld provides high productivity from the beginning. The application determines which laser source will be used and thus stainless steel, Kovar, Titan alloys and nonferrous metals can be efficiently processed. Typical devices for precision laser welding include sensors, micromotors, medical components and other miniature elements such as housings which require leak tightness.

Engineered for : • Titanium alloys • Metals with high residual stress • Stainless steels • Special alloys • Abrasive non-ferrous metals and graphite

Engineered for : • Steels of the highest tensile strength • Long chipping materials • Stainless steel • Titanium based alloys • Nickel based alloys • Special bronzes

Zinc Alloy and Stainless Steel versions available,Opening angle 180°,ROHS compliance

Zinc Alloy and Stainless Steel versions available,1333key or Non-locking version,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Zinc Alloy and Stainless Steel versions available,Opening angle 180°,Easy Installation,ROHS compliance.Widely used in all kinds enclosures,machines,generators.

Zinc Alloy and Stainless Steel versions available,1333key or Non-locking version,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Zinc Alloy and Stainless Steel versions available,Housing Lengths 18mm,28mm,36mm,62mm available,different Insert Type available,Head Diameter Ø28,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Zinc Alloy and Stainless Steel versions available,5 different Insert Type available,Head Diameter Ø20.8,Door Cutout: Ø16*13.5mm,Vibration Resistant,Easy Installation,ROHS compliance

Examples of applications include pressure switches or thermostats: Deep-drawing techniques to manufacture seamless tubing up to 50mm ID and 450mm length - in wall-thicknesses as low as 0,064mm. Based on this, our smalles precision bellows start with only 6X4,2mm. Mainly requested with individual bottom shape, they are performing as reliable force transmitters. Besides bronze and brass, stainless steel and other alloys are available.

EP-M150Pro adopts patented MPBF™(Metal Powder Bed Fusion)to produce high performance, high accuracy and high details parts at large scale. The machine is capable of optional single/dual laser system, and 200/500W laser source for different production requirements. The available materials are Aluminum alloy, Titanium alloy, Inconel alloy, Maraging steel, Stainless steel, CoCr, Copper alloy and so on.

Hand riveters are essential tools for anyone who needs to join two materials together permanently. These tools work by compressing a metal rivet through two or more layers of material, creating a secure and permanent bond. Hand riveters are used in a wide range of industries, including construction, metalworking, and automotive repair. They are especially useful when working with materials that cannot be easily welded or screwed together. Equipped with 4 heads of different sizes, Ronix RH-1604 is ready to help you in your next repair or maintenance work.

Machine, work and operating platforms from stainless steel for aseptic and hygienic application - for example in the food, beverage, pharmaceutical or chemical industry. We offer the complete package including design and static calculation, manufacturing and assembly. We guarantee stainless steel manufacturing quality made in Germany, quick throughput times and competitive pricing. We are your reliable partner for stainless steel platforms and mezzanines!

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.