Square shape - Import export

RK Rose+Krieger has expanded its range of electric cylinders with the introduction of an additional electromechanical heavy-duty cylinder: the SLZ 63. Thanks to its square shape, slots in the external profile and fitting dimensions according to DIN ISO 15552, the SLZ 63 can be integrated flexibly into a wide range of customer-specific applications.

The guide profiles of the Alpha Colonne are exactly square shaped. This makes the side forces identical for all sides. Compared to other systems, it has a third guide step with a large overlapping when it is extended which improves its stability. Max. travel 600 mm Max. compressive force 3000 N Max. compressive force 3000 N Max. travel speed 8-18 mm/s Protection rating IP 30

Product name: 1000g container Article number: 235 Shape: square Closure system: Tamper Evidence Material: PP Dimensions: 125,50mm x 125,50mm x 105,00mm Nominal volume: 1000g Possible decoration: IML-label Units per box: 288 pcs. Units per pallet: 5.760 pcs. Fitting combination article: Lid 1000g 234

Foam rubber round cord rings, square or shaped profiles can be glued cleanly and durably to form round seals or frame seals. No mix-up possible With our molded parts and profiles made of foam rubber, a variety of technically safe solutions can be achieved. The extreme range of variations in terms of softness, elasticity, surface, shape and durability make foam rubber distinctive and indispensable as dimensionally stable seals, sound insulation elements, elastic bearings and for countless other applications. Let yourself be amazed by the versatility of our options and inspired by the safety and durability of our products. Foam rubber from KOPP - no mix-up! Your use of foam rubber We have foam rubber available for you as profile goods, ie foam rubber round cords, shaped profiles and square profiles in numerous standard dimensions. We also produce special profiles and molded parts according to your specifications. Foam rubber in sheet form completes this offer.

MOVE cutlery inserts feature simple no-frills linework and square shapes. The combination of fixed elements and movable dividers within the multi-purpose compartments complements the design and introduces greater flexibility to the organization of kitchen drawers. Modern vacuum thermoforming and tool technology make it possible to control the flow of material in the production process to such an extent that a good material distribution is achieved even when handling highly stretched surfaces. The new styling devoid of radii and graduations harmoniously adapts itself to the design of the drawer guidance systems. As one has come to expect from AGOFORM, every carcase size has its own divisions and variants from 300mm to 1200mm width in two different depths. A sturdy construction coupled with hygienic polystyrene makes for a durable, easy-clean product of the highest quality.

MOVE cutlery inserts feature simple no-frills linework and square shapes. The combination of fixed elements and movable dividers within the multi-purpose compartments complements the design and introduces greater flexibility to the organization of kitchen drawers. Modern vacuum thermoforming and tool technology make it possible to control the flow of material in the production process to such an extent that a good material distribution is achieved even when handling highly stretched surfaces. The new styling devoid of radii and graduations harmoniously adapts itself to the design of the drawer guidance systems. As one has come to expect from AGOFORM, every carcase size has its own divisions and variants from 300mm to 1200mm width in two different depths. A sturdy construction coupled with hygienic polystyrene makes for a durable, easy-clean product of the highest quality.

Product name: Lid 1000ml Article number: 194 Shape: square Closure system: Tamper Evidence Material: PP Dimensions: 136,50 x 136,50mm x 11,80mm Possible decoration: IML-label Units per box: 800 pcs. Units per pallet: 16.000 pcs. Fitting combination article: 1000ml icebox 195

Product name: 1000ml icebox Article number: 195 Shape: square Closure system: Tamper Evidence Material: PP Dimensions: 139,00mm x 139,00mm x 74,80mm Nominal volume: 1000ml Possible decoration: IML-label Units per box: 2.160 pcs. Units per pallet: 4.320 pcs. Fitting combination article: Lid 1000ml 194

Product name: 775ml square tub Article number: 841 Shape: square Closure system: Tamper Evidence Material: PP Dimensions: 100,70mm x 100,70 x 120,50mm Nominal volume: 775ml Possible decoration: IML-label Units per box: 2.156 pcs. Units per pallet: 6.468 pcs. Fitting combination article: Lid square 275ml/600ml/775ml 393

Product name: lid square 275ml/600ml/775ml Article number: 393 Shape: square Closure system: Tamper Evidence Material: PP Dimensions: 97,50mm x 97,50mm x 6,30mm Possible decoration: IML-label Units per box: 2.160 pcs. Units per pallet: 43.200 pcs. Fitting combination articles: 275ml square tub 392 600ml square tub 391 775ml square tub 841

Product name: 600ml square tub Article number: 391 Shape: square Closure system: Tamper Evidence Material: PP Dimensions: 100,70mm x 100,70mm x 90,20mm Nominal volume: 600ml Possible decoration: IML-label Units per box: 2.310 pcs. Units per pallet: 6.930 pcs. Fitting combination article: Lid square 275ml/600ml 393

Product name: 275ml square tub Article number: 392 Shape: square Closure system: Tamper Evidence Material: PP Dimensions: 101,50mm x 101,50mm x 43,20mm Nominal volume: 275ml Possible decoration: IML-label Units per box: 3.080 pcs. Units per pallet: 9.240 pcs. Fitting combination article: Lid square 275ml/600ml 393

Square stainless steel tubular heaters BASE-flex (1.4541) are a reliable industry standard for the use in heating platens and manifolds. In contrast to traditional tubular heaters with a round section which have to be bent by machines, square BASE-flex can be fitted into any rectangular groove with simple hand tools. Moreover, the square shape results in a bigger heat emitting area of up to 80% compared with a corresponding round section. Finally, the easy manual mounting saves the usually high technical expenditure for casting-in / soldering / cementing of bent round tubular heaters. A soft version of the BASE-flex, the NICKEL-flex (2.4068) is available as special execution. Due to the soft, easy to form nickel material, the NICKEL-flex is suitable for manual mounting with hand tools in round sections, too. Furthermore, Nickel has a better capability to conduct heat compared with stainless steel.

Product name: Lid 1000g Article number: 234 Shape: square Closure system: Tamper Evidence Material: PP Dimensions: 123,10mm x 123,10mm x 7,80mm Possible decoration: IML-label Units per box: 1.248 pcs. Units per pallet: 24.960 pcs. Fitting combination article: 1000g container 235

LMF JDN Low Headroom Trolleys The trolley for areas where headroom is restricted Carrying capacities: from 0,5 t up to 6,3 t When only very low headroom is available we recommend the JDN-Ultra-Low Monorail Hoists. Standard Features State of the art by using JDN Air Hoists PROFI TI as well as a new driving motor Low-maintenance and low-wear operation of the motors by means of a reduction of components No additional motor lubrication required 2-step travelling speed Changeable track width * Advantages Able to negotiate curves Longer cross beams to improve the minimum headroom even with bulky loads Options Rack and pinion drive Spark-resistant package Offshore paint Energy Feeding Systems The energy can be fed by various different systems: Energy chain C-shaped rail Square rail Spiral hose Hose trolleys * Please contact us.

PROFI 6 TI LM JDN Trolleys Carrying capacities: up to 20 t as manual trolleys (LN) for pushing or pulling the trolleys by hand as reel chain trolleys (LH) for moving the trolleys by unwinding the reel chain as motorised trolleys (LM) powered by an air motor Standard Features easy to install with anti-climb and anti-drop devices robust and with little maintenance able to negotiate curves Options Rack and pinion drive 1 Spark-resistant package 2 Offshore paint 2 Energy Feeding Systems The energy can be fed by various different systems: Energy chain C-shaped rail Square rail Spiral hose 1) From LM 3.2t upwards 2) Not available for LN 1t

Not all extruded profiles are required to be circular in shape! Whether it is a seamless or porthole hollow-profile, at ALUnna, we have a multitude of possibilities. Simple profiles, such as a solid profile or an angle profile, are also available. On some profiles we may have the possibility to further improve the dimensional tolerances by adding a subsequent drawing step to achieve final dimensions. In addition to round tube, shaped, square or rectangular tubes in both medium strength and high-strength alloys can be produced.

In the areas where seller and customer meet in direct contact, special hygiene regulations must be observed in the current situation. The spitting protection "Construct" is optimally suited to protect employees and customers. The shapely aluminium square tube provides the stable frame around the plastic pane. This is crystal clear and with a size of 1,000 mm width and 500 mm height, it offers exactly the right hygiene protection. The entire frame has a height of 750 mm, which allows the possibility of a pass-through in the lower area. The height of the pass-through is 250 mm. Would you like the product in a different format? No problem. Please contact us! We recommend cleaning the material with a soft microfibre cloth and warm soapy water.

It is possible to have square as well as round shapes, drilled holes and slots from Ø2 – Ø30 mm, with counter bores and tapped holes. To reduce stress concentration and shearing stress when mounting, we recommend the reinforcement of the clamping areas by fixing glass reinforced laminate (GHGW) plates. GHGW-reinforcement plates can be purchased loose or attached to the leaf spring. A special two-component adhesive is applied for the bonding. Following images indicate possible spring shapes:

Waste bin with motion sensor for contactless operation. Capacity 6 litres. • Touchless waste bin with sensor technology • Opens via a movement sensor and closes automatically. Can also be operated manually via an Open/Close button • Removable inner bucket with handle and bin bag holder • Removable lid for easy emptying • Soft-close lid • Stainless steel outer body with anti-fingerprint coating • Non-slip base and square, space-saving shape • Four AAA batteries required (not included) • Capacity: 6 litres

Closure Variations – Woven Bags – Permanent Carrying Bags Customers who would like to better protect their articles in a PP woven shopping bag or to ensure that their products are not exposed to sun, dirt, or rain, can choose between various possibilities. Woven bags with snap buttons offer protection even in the bag opening. Most woven bags have no closure at all. Snap buttons are available in plastic or metal quality and in multiple colours. For woven bags which are square shaped and have a depth of up to 15cm, a snap button in the middle of the top of the folded rim is often adequate. When the bags are to be used as promotional, shopping, or trade fair bags, customers want them to be easy to open and close again. Both the closure you choose as well as the format and measurements of the bag you design will help to achieve this. Functionality for the user comes from a combination of form and function. If you're looking for woven bags to be filled with broschures and give-aways...

Combination Braid of ePTFE with incorporated Graphite and Para-Aramid Fiber Corner Reinforcement with Special Blocking compound Practical useful application data: max. temperature: +200 °C Characteristics Reinforced packing with reduced wear through improvedheat conductivity Recommended shaft surface hardness: HRC 50 Safe universal packing for abrasive media Extrusion resistant, ideal for worn equipment with bigger gap width Development: Better sealability of stuffing box Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 3 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Waste water technology Chemical industry Variant Square shape S12K Plunger with ParaAramid-Corner...

Para-Aramid Fiber Packing with PTFE Impregnation and Run-In Lubricant­ Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High cross section density through PTFE blocking agent, which protects against penetration of crystallizing media Excellent value for money Good resistance against wear, with abrasive and hardening mediums Recommended shaft surface hardness: HRC 50 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.20 g/cm³ Practical useful application data: max. temperature: +200 °C Haupteinsatzgebiet Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Power plant technology Waste water technology Mining industry Variant Square shape P7 Form of delivery This packing can be manufactured in...

Adjustable feet in over 20,000 variations — fixed adjustable foot — hinged adjustable foot function: — screw-on (with screw-on hole/with extension arm/through accessories: floor mounting for trapeze plate) — levelable — swiveling — anti-slip (by accessories: anti-slip plate made of thermoplastic elastomer) — EDS-capable Plate shape and size: — Round — Trapezoidal shape — Square — Diameter 20 mm to 120 mm other shapes on request Material plate: — Plastic PA, glass ball reinforced — steel, galvanized — zinc die casting — stainless steel other materials and surfaces on request Threaded rods for adjustable feet with/without ball head — swivel range 0° - 20° degrees — M5, M6, M8, M10, M12, M14, M16, M20, M24, M30 — Length: 20 - 300 mm — Alternative: ball head with internal thread — Material: galvanized steel, stainless steel Colors: black, silver, other colors on request

The bin blender is a special form of free-fall blender. Bin blenders are used wherever the volume of usually available containers are not sufficient for the batch, or the given process requires a fixed clamped blending container. The design of the bin blender can be customized to customer specifications. Whatever the bin shape - square, rectangular, round with a cone, double cone - symmetrical or asymmetrical, V-container - all these bin blenders from SERVOLIFT can be extended in order to perform the installation and extension functions as with typical container blenders. This includes an optional and useful WIP cleaning to clean the blender chamber. Blend in customer-specific containers Technical description Stainless steel or cGMP-compliant design Free-standing or floor- or ceiling-mounted design Loading using docked containers, vacuum transport systems, gravimetric feeding and discharging. Dosing systems for discharging Safety housing depending on where set up, and...

Compact braided square and rectangular copper flexibles made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys (upon request) in bare, tin-plated or silver-plated. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.20 mm. Cross-section ranging from 0.47 mm² to 50 mm² (further dimensions upon request). Square copper braids require less space in comparison to round copper braids with the same cross-section. There is a precise positioning owing to square or rectangular shape, which allows for failure-free and fully automated downstream manufacture. Squre or rectangular copper braids are characterised by very good Flex life, being absolute free from twist, a compact cutting surface, a very high degree of dimensional accuracy and a very long lifetime. Compact braided square and rectangular copper flexibles are particularly suitable for applications in carbon brushes industry, connection technology, switches and aviation industry.

◆44kW spindle enabling high-production (high-speed and high-power) cutting ・Double built-in motor is installed in the square ram ・High-level of productivity is enabled by the compact spindle with 44kW power and 1,200N·m torque ・Best-in-class chip discharge amount is achieved ◆Stable high-accuracy achieved by a high-rigidity structure ・High-rigidity and thermally symmetric angular columns employed ・The Z and W axes are driven by double ball screws driven at the center of gravity ・Center through cooling is provided as standard equipment for the Y and Z axes ball screws ◆"Easiness to use" taken into account ・The NC controlled W axis can be used as the machining axis and synchronized in operation with the Z axis ・Work accessibility is improved by the cylindrically shaped tip of square ram ・High customizability can cope with different needs

samples available finishing from 100 pieces from stock available fast delievry comeptitive prices European delivery

Shape: Square Material: EN AW-6060 (AlMgSi0,5), 3.3206 Type of production: pressed Condition: solution annealed, artificially aged Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020303 UNSPSC 11.2: 30102406 Dimensions: Edge length (mm): 8 - 60 Length (mm): 6,000