Spring technology - Import export

With the LED WindSign "Seal Lite" you will attract the attention of customers and your advertising message, especially in dark weather. The powerful battery has a runtime of 16 hours in ecomode. At 100%, a running time of 8 hours is achieved. The pavement display is designed for permanent outdoor use. It is equipped with a fillable plastic base and can be used in highly frequented areas, such as pedestrian zones or walkways. Due to a special spring technology, it is perfectly suited for use in windy locations. The poster can be changed using the folding technology built into the frame. By simply opening the profiles, the protective foil is removed and the insert is exchanged. Thanks to the wheels integrated in the base, the LED WindSign "Seal Lite" can be moved flexibly and moved to the desired location.

Our WindSign "Seal" is designed for permanent outdoor use. The folding technique of the frames guarantees a quick change of the posters. A circumferential sealing rubber mounted on the rear walls prevents water from entering. The rear walls are also made of weather-resistant polystyrene. The anti-reflective covers made of UV-stabilised material prevent the posters from fading. The installation of the customer stopper is very easy. The frame is simply screwed to the plastic base and the stand is ready for use. The high stability of the Wind Sign is guaranteed by the fillable base and the special spring technology, so that the stand can also be used in stormy weather. Thanks to the wheels integrated in the base, the WindSign "Seal" can be moved easily to the desired position.

The new poster stand WindSign "Madera" is made of a 40mm wide beech wood frame and is equipped with lacquered chards boards on both sides and is therefore suitable for various industries. The pavement sign "Madera" is equipped with a double-sided magnetic chalk board. The board area of ​​590 x 780 mm can be labeled on both sides with chalk markers / illumigraphes and then wiped off again. The protection of your advertising message can be ensured by the optionally available magnetic protective film. Furthermore, printed posters can be attached directly to the blackboard by means of magnets. The beech wood coated with high-quality, weather-resistant protective lacquer makes this stand suitable for both indoor and outdoor use. To avoid falling over the customer stoppers, the movable pedestal is filled with water or sand and can then still be easily moved by tilting. The spring technology allows a secure stability in wind and weather.

The new UNI Dicht TRI achieves the highest shielding attenuation values over the complete frequency range and convinces with a very high current carrying capacity for the reliable discharge of undesirably high shielding currents. The installation is simple and safe: only the cable sheath has to be removed at the contact point where the shielding braid is to be contacted. As soon as the cable is inserted into the cable gland, the TRI spring makes reliable contact with the cable shield, even in the case of non-circular or off-centre cables. In any case, this type of contacting from PFLITSCH means that the cable shield does not have to be exposed until directly at the connection point in the control cabinet. Because the shielding braid remains 100% intact, maximum shielding attenuation is achieved and the useful signals are transmitted without unnecessary interference from noise signals.

TECHNICAL DATA Weight: only 2,2 kg! With AIR-SPRING-TECHNOLOGY Press power: 150 kN Operating pressure 850 bar Pressed to code 34 (300 mm²) Dimensions: Ø 73 x 247 mm

TECHNICAL DATA Weight: only 4,5 kg! With AIR-SPRING-TECHNOLOGY Press power: 300 kN Operating pressure 850 bar Pressed to code 44 (625 mm²) Dimensions: Ø 88 x 287 mm

TECHNICAL DATA Weight: only 9,6 kg! With AIR-SPRING-TECHNOLOGY Operating power: 540 kN Operating pressure 850 bar Crimping die indicator to indicator 58 (1000 mm²) Dimensions: Ø 118 x 294 mm

TECHNICAL DATA With AIR-SPRING-TECHNOLOGY Press power: 960 kN Crimping die receiving up/down Operatin pressure max. 850 bar Max. code 87 Fork width 40 mm For insulation diameters 250 mm Weight 26 kg

TECHNICAL DATA With AIR-SPRING-TECHNOLOGY Press power: 1500 kN Crimping die receiving up/down Operatin pressure max. 850 bar Max. code 94 Fork width 50 mm For insulation diameters 250 mm Weight 47,5 kg

TECHNICAL DATA Weight: only 3,3 kg! With AIR-SPRING-TECHNOLOGY Cutting power at 850 bar: 82 kN Operating pressure 850 bar Max. Cabel diameters 45 mm Suitable for cable types Al/St, Al, Cu Dimensions: 104 x 50 x 303 mm design by ipr Entwicklung

TECHNICAL DATA Weight: only 3,3 kg! With AIR-SPRING-TECHNOLOGY Cutting power at 850 bar: 82 kN Operating pressure 850 bar Max. Cabel diameters 45 mm Suitable for cable types Al/St, Al, Cu Dimensions: 104 x 50 x 303 mm design by ipr Entwicklung

TECHNICAL DATA Weight: only 3,2 kg! With AIR-SPRING-TECHNOLOGY Cutting power at 850 bar: 82 kN Operating pressure 850 bar Max. Cable Diameter. 50 mm Suitable for cable types Al, Cu Dimensions: 104 x 50 x 293 mm

TECHNICAL DATA Weight: only 4,3 kg! With AIR-SPRING-TECHNOLOGY Cutting power at 850 bar: 82 kN Operating pressure 850 bar- Max. Cabel diameters. 95 mm Suitable for cable types: Al, Cu Dimensions: 150 x 50 x 432 mm design by ipr Entwicklung The closed form enables you to safely cut your cables in the cable trench and in "the security section".

TECHNICAL DATA Weight: only 4,3 kg! With AIR-SPRING-TECHNOLOGY Cutting power at 850 bar: 82 kN Operating pressure 850 bar- Max. Cabel diameters. 95 mm Suitable for cable types: Al, Cu Dimensions: 150 x 50 x 432 mm design by ipr Entwicklung The closed form enables you to safely cut your cables in the cable trench and in "the security section".

TECHNICAL DATA Weight: only 5,5 kg! With AIR-SPRING-TECHNOLOGY Cutting power at 850 bar: 82 kN Operating pressure 850 bar Max. Cabel diameters. 120 mm Suitable for cable types: Al, Cu Dimensions: 174 x 50 x 479 mm design by ipr Entwicklung The closed form enables you to safely cut your cables in the cable trench and in "the security section".

our super light hydraulic crimping head ipr990hP with 100 tons Crimping force at a sensational weight of only 20 kg!!! TECHNICAL DATA Weight: only 20 kg ! With AIR-SPRING-TECHNOLOGY Operating power: 1000 kN Operating pressure: 850 bar Crimping die diameter: 95 mm Crimping die: Indicators to KZ 68 Suitable for Cable types: Al, Cu Dimensions: Ø 148 x 287 mm

our super light hydraulic crimping head SL990HP with 100 tons Press power is suitable for compression of up to 2500 mm² Cu Cables in a sensational weight of only ca. 20 KG!! TECHNICAL DATA Weight: only 20 KG ! With AIR-SPRING-TECHNOLOGY Press power: 1000 kN Operating pressure: 850 bar Crimping die diameter: 110 mm Crimping die: Indicators at KZ 87 Suitable for Cable types: Al, Cu Dimensions: Ø 158 x 287 mm

The SMA 60 is available in an electrical, compressed-air or high-frequency design. The machine is designed for handling steel, aluminum, copper and plastics. In NE metals and steel up with a tensile strength of 600N/mm², a chamfer width of up to 30mm is possible. In addition to this, a radius processing of 1.2mm to 15mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. Advantages: Booster technology for a higher material removal rate Spring technology for higher service life of cutting inserts Processing chamfers, radii on sheets, containers, inner and outer edges, contours and drill holes Replaceable cutter head for different chamfer angles 0 - 80° Easy and vibration-free work

Excellent translation corner nail pliers 14 cm is especially suitable for thick and deep ingrown feet and fingernails.the serrated handles provide a secure grip when working. Translation corner pliers available in 14 cm and 16 cm, pointed cutting edge with pelvises (halves), i.e. one half of the pliers penetrates the other in the joint (trade). Therefore the pliers are very stable and a precise cutting of the nails is no problem. Especially harder nails such as toenails can be easily cut with these pliers, thanks to the transmission spring technology. Stainless steel instrument: The use of stainless steel ensures not only minimal wear and tear but also excellent, durable cutting properties. Stainless steel instruments are nickel-free, anti-allergic and sterilizable. Suitable for the highest professional demands.

Excellent translation corner nail pliers 16 cm is especially suitable for thick and deep ingrown feet and fingernails.the serrated handles provide a secure grip when working. Translation corner pliers available in 14 cm and 16 cm, pointed cutting edge with pelvises (halves), i.e. one half of the pliers penetrates the other in the joint (trade). Therefore the pliers are very stable and a precise cutting of the nails is no problem. Especially harder nails such as toenails can be easily cut with these pliers, thanks to the transmission spring technology. Stainless steel instrument: The use of stainless steel ensures not only minimal wear and tear but also excellent, durable cutting properties. Stainless steel instruments are nickel-free, anti-allergic and sterilizable. Suitable for the highest professional demands.