Results for
HFP BANDSTAHL GMBH & CO KG
Germany
Spring steel is a model of load-bearing capacity. Characteristic for this material group are homogeneous microstructures and optimal surfaces. It stands for above-average service life, dimensional stability and constant quality in every end product. Spring steel obtains its special properties through special treatment in the production process, whereby the even distribution of the carbon content is of particular importance. It undergoes several rolling processes and repeated heat treatments in numerous work steps - this is how we guarantee optimum quality for your products! C 67 S - C 100 S/➔ according to DIN EN 10132 - 4 Depending on the customer's requirements, we supply treatment states from soft annealed to high cold solidified.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
This parts used for mechanical parts.
Request for a quoteLESJÖFORS INDUSTRIAL SPRINGS & PRESSINGS GMBH
Germany
Stainless steel gas springs function the same as their common hydraulic counterparts, but give an alternative when operating under rough conditions such as off-shore and other outdoor exposure applications. Other commons application areas for stainless steel gas spring include health care products, food industry and medical devices.
Request for a quoteSPIROL
Germany
SPIROL offers a line of austenitic stainless steel Disc Springs in diameters ranging from Ø8mm to Ø71mm. Austenitic stainless steel is typically used for static and low cycle applications that require a heightened level of corrosion resistance. It withstands fresh water and atmospheric marine conditions very well, and is suitable for many other industrial conditions including acidic environments. This material will continue to work harden with use so cycle life is limited, but creep resistance is good. SPIROL supplies both single Disc Springs as well as Pre-Stacked Disc Springs in custom configurations, packaged in shrink wrap with a perforated tab for easy of assembly.
Request for a quoteSPIROL
Germany
SPIROL manufactures Coiled Spring Pins out of 316 stainless steel to meet specific application requirements. Type 316 stainless steel is similar to 302/304 stainless steel with a slightly higher nickel content and the addition of molybdenum. The molybdenum content increases the chemical resistance of this alloy greatly. 316 exhibits superior pitting resistance against sea water, acetic acid vapors, chlorides, sodium and calcium brines, hypochlorite solutions, phosphoric acid, and the sulfite liquors and sulfurous acids used in the paper and pulp industry. This alloy is also austenitic, non-magnetic and non-hardenable using conventional methods. 316 stainless steel has better mechanical properties at elevated temperatures than 302/304 and offers excellent mechanical integrity at subzero temperatures. Typical applications for SPIROL's 316 Stainless Steel Coiled Pins include the following: marine, processing equipment, industrial, oil and gas and medical.
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped spring steel plain bearing | Requires maintenance | DIN 1498 | DIN 1499 FER-MET® is a spring steel plain bearing without integrated sliding material. Lubrication of the bearing point is necessary. Very high load capacity and impact resistance for heavy-loaded applications with impact loads. Very wear-resistant. A standard gap design with a straight slot and without chamfer inside [EG], but can also be manufactured with other slot shapes if required. For technical details, please visit the product page on our website!
Request for a quotePIERON GMBH
Germany
Dimensions Spring dimensioning according to customer request Material All spring materials Stainless steel Coating In-house phosphating Color code on the spring Additional coatings through external services Specialities Wave springs highly resistant against dynamic stress Wave springs highly resistant against static stress Minimal relaxation through heat treatment Automated setting- and force-inspection Customized dimensioning Axial installation space saving up to 50 % High spring rates with low tolerances
Request for a quotePIERON GMBH
Germany
Dimensions Wire diameter: 0,2 – 8,0 mm Outside diameter: > 120 mm after consultation All wire profiles feasible Material All spring materials and quality steels with lower strengths Coating All commonly coated spring steels In-house phosphating In-house stove-enameling Additional coatings through external services Specialities Clamping rings made of round wire or flat material Clamping rings with a stamp Rings with defined bendings Minimum burr cut-geometry Additional processing available after consultation Customer specific packaging Rapid prototyping
Request for a quotePIERON GMBH
Germany
Dimensions Wire diameter: 0,3 – 4,5 mm spring-hardened Wire diameter: 0,3 – 7,0 mm soft Profiles other than round wire after consultation Material All spring materials and quality steels with lower strengths Coating All commonly coated spring steels Additional coatings available after consultation Specialities Tight torsional tolerances Torsion springs with max. two coils (toggle springs) All kind of hook and leg configuration Rapid prototyping
Request for a quotePIERON GMBH
Germany
Dimensions Wire diameter: 0,2 – 8,0 mm Spring length up to 1500 mm Special profiles feasible Outside diameter max. 120 mm Customer specific spring shape Material All spring materials Coating All commonly coated spring steels In-house phosphating In-house stove-enameling Additional coatings through external services Specialities Compression springs highly resistant against dynamic stress Compression springs highly resistant against static stress Minimal relaxation due to heat treatment Fully automated setting- and force-inspection Smallest force tolerances Customer specific packaging Assembling and mounting with other components Rapid prototyping
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology, Stainless Steel Traction force range max. 1,200 N Stroke 50 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology, Stainless Steel Traction force range max. 150 N Stroke 20 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.
Request for a quoteFWH FEDERNFABRIK WILHELM HESSE GMBH
Germany
Generally, helical compression springs are made from circular spring-steel wires. The first and last windings are connected to the next one and usually ground with a diameter of 0.4 mm or more. Normally, the pitch (distance between the coils) and thus the spring characteristics are constant. In reality, special forms of compression springs are, according to space conditions and various needs, often required. Do not hesitate to ask us, we gladly optimize your applications with you.
Request for a quoteDIETZ GMBH
Germany
Production to order – also with special-purpose materials as required: We only produce in accordance with customer specifications. Compression springs can assume a wide variety of designs and forms. Our production facilities include compression springs with wire thicknesses in the range of 0.30 to 3.00 mm with abraded ends and in the range of 0.10 to 4.00 mm with unabraded ends. Even extremely strict tolerances regarding length and strength are adhered to in our compression spring production facility. Special-purpose materials that meet specific requirements can also be integrated into production without any problems. Wire materials: All standard spring steel wires in accordance with EN 10270. Non-ferrous wires made of copper, brass and bronze. Special alloys such as: Hasteloy, CuNi44, NbZr1, TaW2. Other materials on request.
Request for a quotePIERON GMBH
Germany
Dimensions Wire diameter: 0,3 – 4,5 mm spring-hardened Wire diameter: 0,3 – 7,0 mm soft Part length: customer specific after consultation Profiles other than round wire after consultation Material All spring materials and quality steels with lower strengths Coating All commonly coated spring steels Additional coatings available after consultation Meeting the closest tolerances Specialities Partial machining Stamping Thread cutting or rolling Fully automated mating with other parts Mounting and component manufacturing Processing of painted wires Rapid prototyping
Request for a quoteRG + SCHWINGUNGSTECHNIK GMBH
Germany
Spring isolators can be used for source and sender vibration isolation. The springs are manufactured of a special spring steel wire and KTL coated. Every spring isolator can be provided with an additional damping cushion of stainless-steel. Elemente with a frequency range between 3-4 Hz can be provided with a viscous damping, too. Spring isolators with a natural frequency range of 3-5 or 4-6 Hz are especially made for higher forces. They can be expanded in size and load-capacity without any difficulty. Spring isolators of RG+ are available for four different natural frequency ranges: Spring isolators with a natural frequency of 3-4 Hz Spring isolators with a natural frequency of 5-6 Hz Spring isolators with a natural frequency of 7-9 Hz Spring isolators with a natural frequency of 3-5 or 4-6 Hz
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology, Stainless Steel Traction force range max. 300 N Stroke 30 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SCHMITTER HYDRAULIK GMBH
Germany
Knickschutzfedern Material: verzinkter Federstahl Verhindert ein Abknicken des Schlauches unmittelbar nach der Pressung Category Hydraulic hoses and fittings / Hose protection / Bending protection / Bending protection springs / Steel Product number supplier 629012
Request for a quoteJUNIE - JUL. NIEDERDRENK GMBH & CO. KG
Germany
Star Track Push-Open Hinge, protruiding cranking 0 mm, drilling distance 45 mm, without spring, material: steel nickel plated
Request for a quoteP.J. PRAUSE DUROTEC GMBH
Germany
Substitution of steel spring by S-Ply® leaf spring Due to their greater spring action, steel spring packages can be replaced by fewer or even one S-Ply® leaf spring for many applications. Example: a) Substitution b) Cost calculation Steel leaf spring: 155 x 25 x 2 mm 1 package of 10 springs S-Ply® leaf spring: It is essential: with: hS-Ply = Thickness of S-Ply® spring hStahl = Thickness of steel spring nStahl = Amount of steel springs EStahl = Modulus of elasticity (here 210.000 N/mm2) ES-Ply = Modulus of elasticity of S-Ply® leaf spring (here 28.000 N/mm2) The result is that 10 steel leaf springs with a thickness of 2 mm each can be replaced by only 1 S-Ply® leaf spring with the thickness of 8,5 mm. Steel leaf spring* 10 pieces at 1,20 € = 12,00 € Intermediate package layers 18 pieces at 0,12 € = 2,16 € Total costs 14,16 € * purchase quantity > 1000 pieces, status 2009 S-Ply® leaf spring** 1 pc. at 4,13 € = 4,13 € shim plates (if applicable) 4 pc. at 0,12 € = 0,48
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
We supply both from stocks and productions wide range of round bars , certified acc to. EN 10204 2.2 and/or 3.1 Steels for General Use of EN 10025 (S235/275/355 JR/J0/J2) Steels for Quenching and Tempering acc. EN 10083-2, EN 10083-3 Steels for Case Hardening acc. EN 10084 (C10, C15, 16MnCr5, 20MnCr5, 36CrMn5 (UNI7845) Micro-alloyed Steels (18MnV5, 20MnV6) Free Cutting Steels acc. EN 10087(11SMn30/11SMn37) Other Grades upon request. Structural Steel Carbons Steel Case Hardening Steel Heat Treated Steel Spring Steel Free Cutting Steel Tool Steel Stainless Steel
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
Recycling made easy Our machine knives, of uncompromising quality, have been used for decades in recycling for tyre crushing. Even when separating rubber and spring steel, they have been proven in practice day by day. Whether shredder knives, spacers, scrapers or sealing gaskets, shredder teeth for multipleshaft shredders, rotary and stator knives for granulators or machine knives for guillotines Our complete range of products also covers the most demanding challenges in recycling.
Request for a quoteAVITEQ VIBRATIONSTECHNIK GMBH
Germany
AViTEQ-Vibrating Circular motion screens divide into several bulk grain size ranges, seven small amounts of over-or undersize or separate from impurities and foreign matter from the screenings. Vibrating screens are working with directed vibrations/amplitudes, which are selected on special product to screen, depending on the installation conditions. The screens can separate different fractions simultaneously. The choice of the screen size and dimension depend on the task. Advantages & benefits low operating costs, high operational safety, long service life good value for money compact design dust-proof design possible low wear different possible screening performance, depending on size and design different possible meshes and screen shapes possible different possible screen materials (PU, spring steel, stainless steel, wedge-wire screens, perforated plates, etc.) Construction The main components are: strainer with drive traverse strainers / cassette or tensioned version mechanism
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Safety Clamping for Rail Systems, Compact Holding force 300 N Small can clamp perfectly too: The LOCKED-Family SLK clamping elements are more compact than the Series SL. They also clamp directly onto the respective linear guide, suit all standard rail sizes from 15 to 55 mm and profiles from the known suppliers and are extremely reliable and safe. Thanks to the patented spring steel plate system, the product family SLK achieves clamping and holding forces of up to 2,100 N with the shortest reaction times when vented. Thanks to the sintered metal coatings and the clamping function in emergency stop (e.g. in case of a power failure), this range enables braking directly on the rail. All clamping elements offer the maximum holding and braking forces and achieve up to 1 million clamping cycles or up to a maximum of 500 emergency braking operations in the 4 and 6 bar version.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Process Clamping for Rail Systems, Compact Holding force 300 N Small can clamp perfectly too: The LOCKED-Family PLK clamping elements are more compact than the Series PL components. They also clamp directly onto the respective linear guide, suit all standard rail sizes from 15 to 55 mm and profiles from the known suppliers and are extremely reliable and space-saving. Thanks to the patented spring steel plate system, the LOCKED-Family PLK achieves clamping and holding forces of up to 2,100 N with the shortest reaction times when vented. LOCKED PLK achieve 100 % clamping force due to the steel pads that are used, even on greased rails. The clamping elements represent the maximum holding forces. Whether in the 4 or 6 bar version, they are good for up to 1 million cycles.
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
Versatile, highly flexible handling hose for use in zero-pressure applications. For suction and pressure purposes with additional rings. Compressible to approx. 30% of original length. Robust version to handle solid media in the most cramped installation conditions. Outstanding axial and lateral movement. For information on temperature and media resistances please see our Simon resistances chart. Construction: Tube in special quality depending on the medium to be handled Tension and pressure-resistant special fabric inlays Optional: Concealed spring steel wire rings UV, ozone und weather-resistant cover Interior and exterior corrugated Couplings or flanges at both ends In fixed lengths with cuffed ends and/or widened hose endings. Other versions and dimensions on request.
Request for a quoteVKF RENZEL GMBH
Germany
This classic click frame with 25 mm wide, silver anodised aluminium profile is ideal for single-sided poster advertising. For example, this poster frame can be used in the entrance area and sales rooms of companies, retailers, banks and public authorities. This poster frame is characterised by its high-quality workmanship and its silver anodised profile. The aluminium click frame is optionally available with mitred corners or chrome-coloured rondo corners. The cover foils used are made of anti-reflective, UV-stabilised material, which prevents the posters from fading. Furthermore, the anti-reflective coating of the foils - even in sunlight - ensures that the inserts are much easier to read. The rear wall of the click frame is made of weather-resistant polystyrene. The folding technique of the frames guarantees a quick change of the inserts. For the optimal clamping effect even after years, clamping springs made of spring steel are always used.
Request for a quoteVKF RENZEL GMBH
Germany
This poster frame is characterised by its narrow 15 mm profile and mitred corners, at the same time this is the thinnest profile we have in our range. Due to the narrow profile, this frame fits harmoniously into the existing environment of the place of use. The covers used are made of anti-reflective, UV-stabilised material, which prevents the posters from fading. The rear wall of the click frame is made of weather-resistant polystyrene. The folding technique of the frames guarantees a quick change of the inserts. For the optimal clamping effect even after years, clamping springs made of spring steel are always used. As a result, the click frame can also withstand frequent use over the long term. The simple assembly of the aluminium poster frames is mainly done by screwing. For this purpose, each click frame has one or two holes in both longitudinal lower profiles, depending on the size.
Request for a quoteVKF RENZEL GMBH
Germany
The quality winner among the rainwater resistant A-bords! This rainwater-resistant pavement sign is ideal for outdoor use, for example in pedestrian zones. Through a consciously offensive orientation in these areas of application, the poster stand generates the highest possible level of attention. Thus, passers-by become potential buyers and the clientele is constantly expanding. The uniform, high-quality appearance is ensured by the silver anodised click frames and the silver anodised rack. In order to protect the inserted posters effectively against rainwater, a surrounding grooved rubber sealing is mounted on the weather-resistant metal back walls and on the covers. The anti-reflective covers are made of UV-stabilised material to prevent the posters from fading. Due to the folding technique the insert media, such as posters, can be changed easily and quickly. In order to be able to achieve an optimum clamping effect even after years, we always use springs made of spring steel.
Request for a quoteResults for
Spring steels - Import exportNumber of results
66 ProductsCountries
Company type
Category