Special electric - Import export

KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electric Locking Unit The electric Locking Unit KFE is used as a stepless locking device on round rods and holds axial forces in both load directions without axial play. It is used where hydraulic or pneumatic solutions are not possible. The holding force is created by the proven spring-operated clamping system as it is used in SITEMA’s hydraulically or pneumatically operated Locking Units. At a drop of the control voltage or in case of failure of the electric supply, the Locking Unit KFE clamps automatically. Therefore, it is also suitable for use in safety relevant applications. To operate the Locking Unit KFE, a supply voltage of 24 V and a control signal for the input command “clamp/release” are sufficient. The Locking Unit is self-monitoring and provides output signals...

E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Other information Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0 E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E2 micro E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors. E2 micro For restricted spaces One and two-piece E-Chains®, from 5 mm inner height High torsion resistance Smallest inner heights and bending radii Mounting brackets with strain relief optional Small pitch for silent operation Cable-friendly interior Low weight Large pins for a long service life Favorable internal/external dimensions ratio B07/B09 in two parts - Can be folded out in outer radius due to integral hinges Typical industrial sectors and applications General construction machinery Models (micro E-Chain®), Automatic doors Vehicles Measuring machines Electronics Handling systems Pick and place robot iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0

EasyChains® are available in two versions. In the "E" version the cable is simply laid from the outside, and in the "Z" version from the inside. The shortened installation time is one of the main features of the Easy Chain® chains. Their elastic and rugged material igumid NB offers even more reasons for application: Optimum elasticity, UL94-V2 Classification and excellent suitability for clean rooms. Their one-piece design makes EasyChain® especially attractive in price. Due to the lower rigidity of the material, the EasyChain® is not suitable for applications with very high load. New: Now as ESD option Easy Chain® as ESD Overview for easy chain® advantages Further information Series E03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, to be filled in the outer radius Series E04 Inner height hi: 7 mm Inner width Bi: 7 mm Bending radii R: 15 - 48 mm Pitch: 16.7 mm E-Chain®, to be filled in the outer radius Series E045 Inner height hi: 9.4 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the outer radius Series E045.2 Innerheight hi: 9,4 mm inner width Bi: 7+7 mm | 9+9 mm Bending radii R: 18 - 38 mm Pitch; 13 mm E-Chain®, to be filled in the outer radius Series E045.3 Inner height hi: 9,4 mm Inner width Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the outer radius Series E06 Inner height hi: 10,5 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, to be filled in the outer radius Series E065 Inner height hi: 11,3 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.2 Inner height hi: 11,3 mm Inner width Bi: 9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.3 Inner height hi: 11,3 mm Inner width Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.4 Inner height hi: 11,3 mm Inner width Bi: 9+9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E08 Inner height hi: 14,6 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, to be filled in the outer radius Series E14 Inner height hi: 19 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the outer radius Series E200 Inner height hi: 24.3 mm Inner width Bi: 57 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the outer radius Series E200.2 Inner height hi: 24.3 mm Inner widths Bi: 37+37/50+50 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the outer radius Series E16 Inner height hi: 32 mm Inner widths Bi: 23 - 100 mm bending radii R: 60 - 100 mm Pitch: 30,5 mm E-Chain®, to be filled in the outer radius Series E26 Inner height hi: 36.5 mm Inner width Bi: 75 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E26.2 Inner height hi: 37.1 mm Inner width Bi: 48+48 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E26.3 Inner height hi: 37.1 mm Inner width Bi: 47+48+47 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E300 Inner height hi: 48,5 mm Inner width Bi: 75 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series E300.2 Inner height hi: 48.5 mm Inner width Bi: 48+48 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series E300.3 Inner height hi: 48.5 mm Inner width Bi: 47+46+47 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series Z045 Inner height hi: 9.4 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the inner radius Series Z045.2 Inner height hi: 9,4 mm Inner width Bi: 7+7 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the inner radius Series Z06 Inner height hi: 10,5 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, to be filled in the inner radius Series Z065.3 Inner height hi: 11.3 mm Inner widths Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the inner radius Series Z08 Inner height hi: 14,7 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, to be filled in the inner radius Series Z14 Inner height hi: 19 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the inner radius Series Z200 Inner height hi: 24.3 mm Inner width Bi: 57 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the inner radius Series Z200.2 Inner height hi: 24.3 mm Inner widths Bi: 37+37/50+50 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the inner radius Series Z16 Inner height hi: 32 mm Inner widths Bi: 23 - 100 mm bending radii R: 40 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the inner radius Series Z26 Inner height hi: 36.5 mm Inner width Bi: 75 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z26.2 Inner height hi: 37.1 mm Inner width Bi: 48+48 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z26.3 Inner height hi: 37.1 mm Inner width Bi: 47+48+47 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z300 Inner height hi: 48,5 mm Inner width Bi: 75 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius Series Z300.2 Inner height hi: 48.5 mm Inner width Bi: 48+48 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius Series Z300.3 Inner height hi: 48.5 mm Inner width Bi: 47+46+47 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius Certificate IPA: standard material ISO Class 2 according to ISO 14644-1, v = 1 m/s UL94-V2 classification Rotary movement possible Easy Chain® with special material igumid ESD as electrically conductive ESD/TEX option available on request EasyChains® are available in two versions. In the "E" version the cable is simply laid from the outside, and in the "Z" version from the inside. The shortened installation time is one of the main features of the Easy Chain® chains. Their elastic and rugged material igumid NB offers even more reasons for application: Optimum elasticity, UL94-V2 Classification and excellent suitability for clean rooms. Their one-piece design makes EasyChain® especially attractive in price. Due to the lower rigidity of the material, the EasyChain® is not suitable for applications with very high load. New: Now as ESD option Easy Chain® as ESD Overview for easy chain® advantages Further information Series E03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, to be filled in the outer radius Series E04 Inner height hi: 7 mm Inner width Bi: 7 mm Bending radii R: 15 - 48 mm Pitch: 16.7 mm E-Chain®, to be filled in the outer radius Series E045 Inner height hi: 9.4 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the outer radius Series E045.2 Innerheight hi: 9,4 mm inner width Bi: 7+7 mm | 9+9 mm Bending radii R: 18 - 38 mm Pitch; 13 mm E-Chain®, to be filled in the outer radius Series E045.3 Inner height hi: 9,4 mm Inner width Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the outer radius Series E06 Inner height hi: 10,5 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, to be filled in the outer radius Series E065 Inner height hi: 11,3 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.2 Inner height hi: 11,3 mm Inner width Bi: 9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.3 Inner height hi: 11,3 mm Inner width Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.4 Inner height hi: 11,3 mm Inner width Bi: 9+9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E08 Inner height hi: 14,6 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, to be filled in the outer radius Series E14 Inner height hi: 19 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the outer radius Series E200 Inner height hi: 24.3 mm Inner width Bi: 57 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the outer radius Series E200.2 Inner height hi: 24.3 mm Inner widths Bi: 37+37/50+50 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the outer radius Series E16 Inner height hi: 32 mm Inner widths Bi: 23 - 100 mm bending radii R: 60 - 100 mm Pitch: 30,5 mm E-Chain®, to be filled in the outer radius Series E26 Inner height hi: 36.5 mm Inner width Bi: 75 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E26.2 Inner height hi: 37.1 mm Inner width Bi: 48+48 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E26.3 Inner height hi: 37.1 mm Inner width Bi: 47+48+47 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E300 Inner height hi: 48,5 mm Inner width Bi: 75 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series E300.2 Inner height hi: 48.5 mm Inner width Bi: 48+48 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series E300.3 Inner height hi: 48.5 mm Inner width Bi: 47+46+47 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series Z045 Inner height hi: 9.4 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the inner radius Series Z045.2 Inner height hi: 9,4 mm Inner width Bi: 7+7 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the inner radius Series Z06 Inner height hi: 10,5 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, to be filled in the inner radius Series Z065.3 Inner height hi: 11.3 mm Inner widths Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the inner radius Series Z08 Inner height hi: 14,7 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, to be filled in the inner radius Series Z14 Inner height hi: 19 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the inner radius Series Z200 Inner height hi: 24.3 mm Inner width Bi: 57 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the inner radius Series Z200.2 Inner height hi: 24.3 mm Inner widths Bi: 37+37/50+50 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the inner radius Series Z16 Inner height hi: 32 mm Inner widths Bi: 23 - 100 mm bending radii R: 40 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the inner radius Series Z26 Inner height hi: 36.5 mm Inner width Bi: 75 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z26.2 Inner height hi: 37.1 mm Inner width Bi: 48+48 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z26.3 Inner height hi: 37.1 mm Inner width Bi: 47+48+47 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z300 Inner height hi: 48,5 mm Inner width Bi: 75 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius Series Z300.2 Inner height hi: 48.5 mm Inner width Bi: 48+48 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius Series Z300.3 Inner height hi: 48.5 mm Inner width Bi: 47+46+47 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and filling of the Easy Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Easy Chain® Easy Chain: "E" and "Z" makes it "Easy" Easily fillable from the inside (Z version) and outside (E version) Quicker filling, access to cables without opening or closing of the lids Can be put together or taken apart at "any point" Cost-effective, one-piece chain Dirt-proof outer contour Mounting brackets with integrated strain relief available Limited torsional movement possible Available with interior separation (many types) Flammability class UL94-V2 Suitable for clean room applications Typical industrial sectors and applications General machinery Clean room application Electronic equipment Office furniture Vending machines Packaging machines Certificate IPA: standard material ISO Class 2 according to ISO 14644-1, v = 1 m/s UL94-V2 classification Rotary movement possible Easy Chain® with special material igumid ESD as electrically conductive ESD/TEX option available on request

Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links Assembly Instructions Application examples Applications in various industrial sectors. E2 mini One-/Two-piece E-Chain® Small pitch for silent operation High torsion resistance Double stop system and large pins for long service life Optimized weight/stability ratio Easy to mount Manifold interior separation Typical industrial sectors and applications Construction machinery Handling systems Installation Packaging machines Textile machines Vehicle construction Wood machines Glass machines Machine construction General mechanical engineering etc. UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request

Continuous-process shredding of large quantities and volumes: that’s the world of the ERDWICH two-shaft shredder. The secret of its success is our ERDWICH rotor-blade cutting principle, honed to perfection over decades. Want to know more? The material is taken up by the barbed blade, pulled unceremoniously into the machine and then shredded between the blades on the two opposing shafts. Whatever the material – e.g. special waste, WEEE, metal swarf, electrical waste or bulky items – even hard to shred, large-volume materials stand no chance against these two mighty cutter shafts. Perfect results are even guaranteed from fibrous, moist, heat-sensitive, elastic and rubbery materials. And, thanks to its mode of operation as a slow-speed piece of equipment, the ERDWICH two-shaft shredder also features quiet and largely dust-free operation. You can rely on the power and the technology of the ERDWICH two-shaft shredder. Continuous-process shredding of large quantities and volumes:...

Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/light New E4/light version with the proved and tested "tongue and groove" system of the Series E4/4 Low weight Optimized interior-exterior dimensions ratio Cost efficient Manifold interior separation potentials Large accessory kits Thin external links Max. travel distance: 150 - 400 m Typical industrial sectors and applications Machine tools (closed E4/light tubes and open E-Chain®) Material processing Stone cutting machines Woodworking machines General mechanical engineering Vehicles Construction machinery Limited application of long travels Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness

Our focus lies on heat-sealable adhesion promoters for thermoplastics, thermosets and vulcanization adhesion promoters for elastomers. However we also provide functional coatings with special properties such as electrical conductivity, abrasion resistance, sliding properties, temperature resistance and much more.

Adjustment of workstation systems through to complex mechanical engineering systems Lifting columns are the ideal drive elements when a motor setting is required in addition to the stable guidance. The whole technology is integrated and not visible from the outside. These lifting columns do not need any additional coverings. Usually, no special electrical knowledge will be required for the commissioning. Various versions are available as standard for the application in the field of medical technology. Several lifting columns can be combined and synchronised and offer further impressive application possibilities. The MultiControl-units can be linked by a BUS-system and enable the synchronization of maximal 32 lifting columns. The right Lifting column, quickly and easily Use our online product finder and compare lifting columns with each other, receive catalogue and CAD data or request the desired products directly.

TTK 125 S COMMERCIAL DEHUMIDIFIER"Nobody can offer as many litres at this weight" The TTK 125 S combines advanced detail solutions for powerful drying applications with a weight-optimized construction in a tried and tested German industrial design – protected prototype. The inner values are in no way inferior to the impressive enclosure: All electric components are specially enclosed to protect the electronic equipment from anything dangerous which may enter and impair the functionality and durability. Thus, the TTK 125 S is also perfectly suitable for drying in rough conditions. Good things come in small packages: Power pack TTK 125 S Due to its extremely low-maintenance design, the TTK 125 S is easy to clean and thanks to its low power to weight ratio and its clever mobility features, it is easy to transport. Nevertheless, in terms of dehumidification capacity, it is no lightweight:

GraphTHERM® - graphite optimised for heat conductivity. GraphTHERM® developed by Georg H. Luh GmbH especially for improved heat conductivity enable a thermal conductivity of 20 W/mK or more thanks to their special form. The mechanical properties or processability are not impaired even at a high filling degree of more than 60%. This combination of characteristics makes GraphTHERM® especially well suited for plastics applications. GraphCOND® - graphite optimised for electrical conductivity Special pre-treatment and grinding results in graphite particles that enable an effective electrically conductive network to be created even at a low material proportion. A conductivity of >100 S/cm is possible in plastic. GraphCOND® features convincing properties and is versatile in application, for example in dissipative coatings or highly conductive compounds.

Liquid gas hose per DIN EN 1762 (LPG), however with embedded spiral for smallest bending radiuses and very easy handling. For propane, butane and other liquid gasses per DIN 51622. Also suitable to transport gaseous media. For information on temperature and media resistances please see our Simon resistances chart. Construction: Black, electrically conductive special tube Tension and pressure-resistant fabric inlays Embedded copper wire Concealed steel spiral Pin-pricked, weather-resistant, electrically conductive, abrasion-resistant cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length. Available as drum-windable or simple loading or drainage hose, also without spiral. Other versions and dimensions on request.

The specialist for blind rivets up to 8.0 mm in diameter! Special high-strength FERO® BULB blind rivets (and similar types) are set easily and reliably by the combination of short stroke and very high setting force (24,000 N!).

Technical information The AI 02 S3 is a stripping machine driven by an electric motor. Special feature: A special adapted funnel allows to insert two or three wires and strip it in a single step. By turning the stripping blades, the minimal stripping length can be reduced to 3 mm.

Technical information The Z+F EVOPRESS is an electrically driven crimping press for processing a wide variety of electrical connectors such as Z+F ferrules and Z+F terminals. With its compact design it fits into the Z+F EVOLINE. Crimping Machines, such as the Z+F EVOPRESS, are electrically powered tools specialized in the precise processing of various electrical connections. These machines are particularly utilized in handling electrical components like Z+F ferrules and Z+F cable lugs. Their primary function involves establishing a secure and durable connection between electrical conductors and their corresponding terminals through the application of pressure. The Z+F EVOPRESS and similar crimping machines not only deliver high performance but also provide the capability to process various types of electrical connectors with precision and efficiency. Key Features of the Z+F EVOPRESS: Enhanced hand safety with a protective glass at the front of the machine

MPW Modular with air-cooled eddy-current brake, particularly for testing smaller electric motors smaller slowly running 1-cylinder engines drive units of e.g. two-wheelers. Essentially, three different types of construction may be distinguished: 1. MPW Modular for combustion engines and electric motors (primarily 1-cylinder combustion engines) 2. MPW Modular for foot-mounted electric motors 3. MPW F for flange-mounted electric motors Special designs, e.g. for foot- as well as flange-mounted electric motors may be offered on request. MPW engine test beds are available in four sizes with different load-carrying capacities (0,5 ... 40 kW).

Simply usable without encapsulation In addition to the standard version, many actuators are also available as water-proof, splash-proof or dust-proof models. While pneumatic actuators are only safe enough after extensive encapsulation, IAI's IP-protected actuators can be used without any further construction measures. There is no risk of leakage here. The uncomplicated installation without additional units and the small space requirement significantly reduce the costs and time required for commissioning.

Tavrida Electric manufactures small, compact vacuum interrupters with an extraordinarily long mechanical and electrical lifespan. A specially designed axial magnetic field distribution provides an even current density over the contact surface, substantially improving the vacuum interrupting performance. Vacuum interrupter contacts have unique design, based on the mixture of copper and chromium metals and various dopants, to ensure long electrical life of contacts, low contacts resistance and chopping current. The patented, supercompact actuator design allows the circuit breaker to be installed directly underneath each pole. The design is optimal in terms of reliability, dimensions, weight and ease of installation. A spring charged by the magnetic actuator during the closing of the circuit breaker ensures main contacts pressure is maintained. The spring is integrated in the actuator and does not require any maintenance during the circuit breaker's lifetime.

Air insulated switching module incorporates a Tavrida Electric vacuum circuit breaker with a per phase actuator, housed in a corrosion resistant tank. Six main circuit bushings, made from UVstable polymer, are covered with silicone rubber bushing boots. Each bushing has builtin current and voltage sensors for protection, measurement and indication purposes. The outdoor switching module is equipped with six, high voltage bushings with embedded current and voltage sensors. Current sensing is performed by Rogowski coil sensors. Capacitive sensors are used for voltage measurement in all six bushings. Tavrida Electric manufactures small vacuum interrupters with extremely long mechanical and electrical lifespans. A specially designed axial magnetic field distribution provides even current density over the contact surface and significantly improves the vacuum's interrupting performance.

Plastic-coated steel cablestrands are cut to length using a special shear cut module and then stripped with the cutting module of the AM3500 without the wires "jumping open".Bare steel cable wires are transported by the modified AM 3500 directly to the special cutting machine, which is coupled between the AM 3500 and the material stacker and which cuts the material to length by a thermal process. Due to the special electric welding process used here, the individual wires do not twist up during cutting, and a smooth rope start and a smooth rope end without thickening are produced. Long steel cable wires/strands are placed in a tray after processing, while short pieces of material fall down a chute into a collecting container. With the high-performance solution developed by Metzner, the customer can process different types of material in different processes. Further advantages of the machinery are high precision, high quality, an increase in productivity and lower personnel costs.

RAEL, founded in Genoa in 1969 as a electric motors repair and rewinding company, has become an established name in project and production of electric motors for potentially explosive atmosphere. Since 1986 the company grew considerably and moved itself to Predosa where both production and offices are actually located. We supply from our existing stock Kalefeld RAEL- aluminium flameproof motors / hazardous motors Ex de IIC T4 in frame size 56 - 132 ( 2- and 4- poles ) 0, 12 - 1 1 kW . All motors on stock are with Ptc thermistors and fixed bearing . Other frame sizes and versions are available within 4-5 weeks after receipt of order . Special applications Electrical variants Special voltage and frequency Heaters Bimetallic thermal protection (NC, NO), thermistor (PTC), platinum resistor (PT100) Single-phase with permanent capacitor Single-phase with centrifugal switch

We supply from our existing stock Kalefeld elprom- aluminium flameproof motors / hazardous motors Ex de IIC T4 in frame size 56 - 132 ( 2- and 4- poles ) 0, 12 - 1 1 kW . All motors on stock are with Ptc thermistors and fixed bearing . Other frame sizes and versions are available within 4-5 weeks after receipt of order . Special applications Electrical variants Special voltage and frequency Heaters Bimetallic thermal protection (NC, NO), thermistor (PTC), platinum resistor (PT100) Single-phase with permanent capacitor Single-phase

Cemp offers custom-made solutions. The main customers are the chemicals industry, pharmaceutical industry, power plants and minings. Further fields of application are the on-shore- and off-shore plants as well as the shipbuilding industry. The name Cemp stands everywhere for guaranteed security against explosion of dangerous dusts and gasses . We supply from our existing stock Kalefeld cemp- flameproof motors / hazardous motors Exd(de) IIC T4 in frame size 63, 2-poles up to frame size 160, 2-poles (0,18 – 18,5 kW) and frame size 63, 4-poles up to frame size 180, 4-poles (0,12 – 22 kW). All motors on stock are with Ptc thermistors. Other frame sizes and versions are available within 2 -8 weeks after receipt of order . Cemp Explosion Proof Motors / hazardous motors available in IE1 and IE2 High Efficiency Special applikations Mechanical variants Protection IP56, IP65, IP66 Special flanges and shafts Without terminal box Uni-directional bearings, locked bearings or special bearings SPM-vibrations measurement Electrical variants Special voltage and frequency Heaters Bimetallic thermal protection (NC, NO), thermistor (PTC), platinum resistor (PT100) Single-phase with permanent capacitor Single-phase with centrifugal switch Accessories Forced ventilation (IC416) Encoder 100 - 10000ppr Bearing sensor Breaks D.C. disk brake A.C. disk brake Hand release of brake Reverse braking function (braking when energized - frame size 63-100)