Single wire - Import export

High-precision silver-plated single wire used as core for coaxial cables. Size range from Ø 0.10 mm to Ø 1.8 mm, manufactured on a specially designed machine. HF wire is characterised by a highly constant diameter, outstanding centricity and an extremely pure surface.

Round copper wires made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated, silver-plated or gold-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm. Number of wires used for strands: between 3 and 24 wires (subject to single-wire diameter).

Round copper wire made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated, silver-plated or gold-plated, hard or soft annealed. Single wire diameter ranging from Ø 0.04 mm to Ø 1.8 mm. Single wire for high-frequency (HF) technology: High-precision silver-plated single wire used as core for coaxial cables, size range from 0.10 mm to 1.8 mm. This single wire is manufactured on a specially designed machine and is characterised by a highly constant diameter, outstanding centricity and an extremely pure surface.

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

Sheath color green-yellow for equipotential bonding and grounding. Rigid, single-wire design.

Category Electrical equippment for vehicles / Cables / Single conductors / Wire cross section 16 Product number supplier 663302

Slit metal often has camber. GSW builds Camber Straighteners, that help remove this defect. Coil Feed Lines that process small crosssections often only need minor straightening efforts. Here, we can help with pullthrough Straighteners also known as Flatteners. We usually mount them at the entrance of our Servo Roll Feeds or Air Feeds. Wire materials also often have a coil set – sometimes in two levels even. Single and dual Wire Straighteners help making such bent wires straight again.

• For fixing reinforcement steel with binding wire from a roll • Fast, reliable and cost-effective drilling and cutting of the wire in a single operation • Cutting edges inductively hardened • Handles coated with plastic • Made of tool steel, forged, oil-hardened

Rope sockets for lifts acc. to DIN EN 13411-7 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. *cast design similar to DIN EN 13411-7 ** longer strap for a better assembly of ropes with a diameter of 24/25 mm Rope sockets acc. to DIN EN 13411-7 are not appropriate for ropes of more than 1770 N/mm² single wire strength Please find certificates and instructions in our download area:

Rope sockets similar to DIN EN 13411-7 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. Casted symmetric rope sockets: These symmetric rope sockets for rope end terminations are only to be used when subordinate demands are made. The fulfilment of requirements are to be checked combined with the rope, which shall be used with the rope socket, whenever legal and/or safety technical demands for these rope sockets are made. The rope sockets are not appropriate for ropes of more than 1770 N/mm² single wire strength. Please find certificates and instructions in our download area:

The automotive industry standard in thermal profiling Multiple oven tests possible before returning to PC Process Pass/Fail at oven exit Up to 16 measurement locations in a single run Hard wired real-time data analysis from batch ovens Fully customizable and easy-to-use Insight analysis software Wide range of thermal barriers (silicone-free) & thermocouples to suit your process needs DATAPAQ temperature profiling systems comprise high-accuracy industrial-strength data loggers, thermocouples, thermal barriers, and analysis software.

The automotive industry standard in thermal profiling of paint cure processes Silicone-free technology Multiple oven tests possible before returning to PC Process Pass/Fail at oven exit Up to 16 measurement locations in a single run Hard wired real-time data analysis from batch ovens Fully customizable and easy-to-use Insight analysis software Wide range of thermal barriers & thermocouples to suit your process needs

Main products: Electrical round copper wire Product characteristics: Bright and burr-free surface; superior performance quality; Can meet the technical requirements for drawing thin wires, fine wires and special products. Applications: Magnet wires, high and low voltage cables, electrical and electronic devices, communication technology, electrical network, mechanical hardware, construction industry Production capacity: 300,000 tons Honorary titles: Zhejiang Famous Brand Product

The MS / CA connectors form one of the most reliable series in the connector industry. They have a simple design but are simply great for individual wiring and have extremely rugged shells. Designed for single wire assembly, not for jacketed cables. The MS / CA series is a reliable connector range for applications "from device to device"; it is also widely used for testing or inspection purposes.

The MS / CA connectors form one of the most reliable series in the connector industry. They have a simple design but are simply great for individual wiring and have extremely rugged shells. Designed for single wire assembly, not for jacketed cables. The MS / CA series is a reliable connector range for applications "from device to device"; it is also widely used for testing or inspection purposes.

Several bunched single wires or bundles made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.005 mm² to 630 mm². Those single wires do not hold a fixed position inside the strand. Their position relative to one another undergoes a permanent change along the entire length of the bunch. The construction of a bunch is derived from the cross-section required, which leads to the electrical conductor featuring a certain resistance level. Different cross-sections with the same resistance value can be generated by applying single wires of varying sizes. Owing to their good efficiency our bunched single wires are versatile in a multitude of applications in cables and conductors.

Tubular-knitted copper tape made from Cu-ETP1 and Cu-OF1 in tin-plated, bare upon request, soft annealed. Single wire diameter Ø 0.10 mm, processed in 1 x 0.10 mm or 2 x 0.10 mm. Width 25 mm. For electrical shielding.

Flat-knitted copper tape made from Cu-ETP1 and Cu-OF1 in tin-plated, bare upon request, soft annealed. Single wire diameter Ø 0.10 mm, processed in three-fold and eight-fold. Width of flat-knitted copper from 20 mm to 100 mm. For electrical shielding.

High-flexible round strands and ropes made from Cu-ETP1, Cu-OF1, aluminium and LEONI Histral® alloys (upon request) in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 630 mm² (bigger cross-sections upon request). High-flexible round strands and ropes are mainly suitable for earthing straps, connectors, conductors for low-voltage lighting and for welding technology.

Fabric tapes, braided into a tube and then flat-rolled (if needed). Made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.40 mm. Cross-section ranging from 0.09 mm² to 400 mm². Our flat-rolled fabric tapes are characterised by a very high degree of dimensional accuracy. Suitable for earthing straps, connectors or electrotechnical components.

Strands with a concentric structure made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 630 mm². The individual wires are subject to an exact positioning around a core wire, which ensures an all-out uniform structure. Concentric strands are particularly appropriate for thin-gauge coating with high-grade isolation materials (extrusions). 7-end strands are especially suited for data cables with high frequencies of transmission. The technical qualities of a concentric strand can be extremely well and accurately customized by combining several different alloy wires.

High-flexible copper-based ropes, enclosed by an additional braid, made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys (upon request) in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.10 mm. Cross-section ranging from 0.35 mm² to 120 mm² (bigger cross-sections upon request). Our ropes with overall braids are characterised by their good flexibility and their excellent mechanical strength. The overall braid has a vibration-reducing function and prevents unrevelling of the rope. Ropes with overall braids are mainly suitable for automotive, industrial applications and for connectors.

Semi-concentric or concentric strands with very short lay lengths and an extraordinarily smooth surface made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 16 mm². LEONI has had its manufacturing process specifically dedicated to this type of product patented. LEONI smooth bunches boast an exceptionally compact and precise round structure and have a very good Flex life. They are particularly suitable for moving applications and for thin-gauge coating with high-grade isolation materials benefitting from a long flex life as well as weight and space efficiency.

Strands with a semi-concentric structure made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.03 mm² to 16 mm². The individual wires are subject to an exact positioning, yet without an additional core wire, which ensures an all-out uniform structure. Concentric strands are particularly appropriate for thin-gauge coating with high-grade isolation materials (extrusions). The technical qualities of a semi-concentric strand can be extremely well and accurately customized by combining several different alloy wires.

Contured fabric tapes, braided into a tube and then flat-rolled. Made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated or silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.40 mm. Cross-section ranging from 25 mm² to 120 mm². Our flat-rolled fabric tapes are characterised by straight rectangular edges with a very high degree of dimensional accuracy and very close tolerances. There is an adjustable degree of compaction, with cross-section remaining unchanged, as well as an easy combination of different cross-sections laid on top of each other (modular system). Contured, braided copper tapes have an improved weldability in automated production processes for manufacturing of earthing straps, connectors or electrotechnical components.

Compact braided round copper flexibles made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated or silver-plated, in hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.10 mm. Cross-section ranging from 0.047 mm² to 25 mm² (bigger cross-sections upon request). Round copper braids are characterised by a very high degree of dimensional accuracy and a very high Flex life. They are absolute free from twist and support an automatic further processing. Compact braided round copper flexibles are particularly suitable for carbon brushes industry, connection technology, switches or aviation industry.

Compact braided square and rectangular copper flexibles made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys (upon request) in bare, tin-plated or silver-plated. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.20 mm. Cross-section ranging from 0.47 mm² to 50 mm² (further dimensions upon request). Square copper braids require less space in comparison to round copper braids with the same cross-section. There is a precise positioning owing to square or rectangular shape, which allows for failure-free and fully automated downstream manufacture. Squre or rectangular copper braids are characterised by very good Flex life, being absolute free from twist, a compact cutting surface, a very high degree of dimensional accuracy and a very long lifetime. Compact braided square and rectangular copper flexibles are particularly suitable for applications in carbon brushes industry, connection technology, switches and aviation industry.

The potentiometers of the series 46 are used as multiturn sensors or manual adjusters, with outstanding linearity and resolution for measuring ranges from 3 to 30 turns. The optionally integrable limit switches can be factory-configured within the electrically effective angle of rotation or within the signal plateau. Potentiometer with many options. Multiturn 3…20 turns (30 turns on request) Power rating up to 10 W Single-wire versions have nearly infinite resolution