Shock protection - Import export

Self-Compensating, Rolling Diaphragm Technology, TPU Bellow Energy capacity 136 Nm/cycle Stroke 25.4 mm Hermetically sealed: The shock absorbers from the ACE Protection series PMCN have a compact, perfectly sealed cap as a special feature. This protection bellows, made of TPU (thermoplastic polyurethane), safely encapsulates the proven ACE rolling diaphragm from the outside environment. Aggressive cutting, lubricating and cleaning agents don't stand a chance and the function of the maintenance-free, ready-to-install shock absorber is retained. They are also available in full stainless steel. The PMCN series is a good alternative to the SP type air bleed collar if no compressed air is available on the machine or system. Reliable protection against aggressive fluids, these miniature shock absorbers are the first choice everywhere where conventional dampers wear out too quickly, eg. As in machining centers or other applications of mechanical engineering.

Self-Compensating, Rolling Diaphragm Technology, TPU Bellow Energy capacity 41 Nm/cycle Stroke 12.5 mm Hermetically sealed: The shock absorbers from the ACE Protection series PMCN have a compact, perfectly sealed cap as a special feature. This protection bellows, made of TPU (thermoplastic polyurethane), safely encapsulates the proven ACE rolling diaphragm from the outside environment. Aggressive cutting, lubricating and cleaning agents don't stand a chance and the function of the maintenance-free, ready-to-install shock absorber is retained. They are also available in full stainless steel. The PMCN series is a good alternative to the SP type air bleed collar if no compressed air is available on the machine or system. Reliable protection against aggressive fluids, these miniature shock absorbers are the first choice everywhere where conventional dampers wear out too quickly, eg. As in machining centers or other applications of mechanical engineering.

Self-Compensating, Rolling Diaphragm Technology, TPU Bellow Energy capacity 20 Nm/cycle Stroke 12.5 mm Hermetically sealed: The shock absorbers from the ACE Protection series PMCN have a compact, perfectly sealed cap as a special feature. This protection bellows, made of TPU (thermoplastic polyurethane), safely encapsulates the proven ACE rolling diaphragm from the outside environment. Aggressive cutting, lubricating and cleaning agents don't stand a chance and the function of the maintenance-free, ready-to-install shock absorber is retained. They are also available in full stainless steel. The PMCN series is a good alternative to the SP type air bleed collar if no compressed air is available on the machine or system. Reliable protection against aggressive fluids, these miniature shock absorbers are the first choice everywhere where conventional dampers wear out too quickly, eg. As in machining centers or other applications of mechanical engineering.

40% polyester (COOLMAX®) , 30% cotton, 27% polyamide, 3% elastane. Anatomical formed rib-knit in the middle of the foot. With full-terry sole and paddings - protecting and shock absorbing. 40% COOLMAX. Packed separately (each pair in plastic bag). Sizes: 35-38, 39-42, 43-46, 47-49. Colors: Black, Khaki, Navy-Blue, Camel, White. COOLMAX® is a functional fiber with enhanced moisture-wicking characteristics - sweat is released easly. Therefore COOLMAX®-textiles take care of a good and dry footclima. Easy-care. Perfect for sport and outdoor clothes. COOLMAX® is a trademark of The LYCRA Company®.

The TTV 3000 is a real whirlwind on every construction site. This unit is a true professional: distinctive German industrial design with built-in carrying handle, shock-protected switch and stackable polyethylene housing. And all other features of the TTV 3000 are nothing to hide either. With its high-performance, encapsulated fan, this conveying fan which is as robust as lightweight can variably transport fresh air over long distances into adjacent storeys or shafts and exhaust polluted air over equally long distances. Those are ideal conditions for the required air exchange rates for ventilation during channel construction works or welding. Hoses of up to 38 metres in length can flexibly be attached to the blow-out or suction side of the TTV 3000 because this axial fan is equipped with the respective connections on both sides.

The indirect oil heater fan IDS 30 F was specifically developed for the mobile application as tent heater. This easily portable device has a robust frame with shock protection and handles as well as a hose connector already preassembled. We deliberately decided against integrating a tank in the IDS 30 F so that users can benefit from not only the lesser weight but also from time-saving loading since it is not necessary to drain the tank completely of residues. The absent tank also means that no additional transport or insurance documents are required for transport and storage. The fuel supply of the oil heater fan IDS 30 F can be effected either via a large external tank or jerrycan – appropriate accessories are available for both types of application. The heating device is prepared for fully automatic thermostat-controlled operation ex works. For use inside a tent, an external thermostat can be connected optionally using a cable of ten metres length.

The AP05 position indicator guides the user intuitively to the correct machine setting in the case of product or format change. The optimized backlit display indicates target values and actual values straight to the point. Two LEDs show the machine operator precisely the direction whereto the adjustment is to be performed.The AP05 helps avoid wrong machine settings and enhances process safety of flexible production machines.  Electronic position indicator with bus interface. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. User guidance through status LEDs. Hollow shaft with  Ø 20 mm and clamping ring made of stainless steel. Enhanced shock resistance owing to protective display glass. Integrated RS485 interface, CAN bus as an option. Robust sensor technology unit thanks to magnetic scanning. Mechanically compatible with the AP04 and DA04 position indicators. IP53 type of protection, IP65 as an option.

The ORBIS IonPak® is a UN certified plastic container that is designed to transport solid dangerous goods (e.g. UN3480). The solution consists of a durable standard container with customised inner packaging. The lithium battery shipping boxes are suitable for non-certified batteries, prototypes, battery cells, battery modules and batteries in equipment. For increased part protection, the shock absorbing interior packaging is adapted to the customer’s product and supply chain. ORBIS’ lithium-ion battery packaging utilises standard footprints designed to interface with customers’ existing supply chains, e.g. 1200 x 1000 mm. - Certified solutions according RID/ADR - Customer-specific dunnage development - Heavy-duty solution for heavy batteries - Comprehensive product protection - Reusable and recyclable - Different footprints available ORBIS Europe supports you through the entire process – from development to certification of your packaging solution.

3-sided foam padding for optimum corner protection for shock-sensitive goods.

The membrane packaging fixes the product free-floating between two membrane pads that absorb shocks during transport and thus protect it from damage.

For indoor and outdoor use, IP 54. 30 W mobile high-power Chip LED Light with extra-wide light diffusion to illuminate a large area. Low heat generation, no danger of injury. Chip LEDs have an extremely long lifespan, are shock-proof, maintenance-free. Solid aluminum housing with rubberized wrap for additional shock protection. Adjustable folding stand, also suitable for mounting on tripod 1 17061 0. Easily portable with carrying handle. Childproof socket with self-closing cover, water-jet protected. ON/OFF switch. In colourful display-packaging. This luminaire contains built-in LED lamps. Light unit not replaceable. Cable length: 5 m Cable: H07RN-F 3G1,5 Power: 30 W Luminous flux: 2650 lm Lamp efficacy: 85 lm/W Colour temperature: 5700 K Energy efficiency class: A

For indoor and outdoor use, IP 54. 50 W mobile high-power Chip LED Light with extra-wide light diffusion to illuminate a large area. Low heat generation, no danger of injury. Chip LEDs have an extremely long lifespan, are shock-proof, maintenance-free. Solid aluminum housing with rubberized wrap for additional shock protection. Adjustable folding stand, also suitable for mounting on tripod 1 17061 0. Easily portable with carrying handle. Childproof socket with self-closing cover, water-jet protected. ON/OFF switch. In colourful display-packaging. This luminaire contains built-in LED lamps. Light unit not replaceable. Cable length: 5 m Cable: H07RN-F 3G1,5 Power: 50 W Luminous flux: 4700 lm Lamp efficacy: 95 lm/W Colour temperature: 5700 K Energy efficiency class: A+

For universal outdoor use and permanent use on sites, IP 44. When touched by current-conducting leads or parts, the current supply is automatically interrupted to protect against dangerous bodily injury and electric shocks. For the best possible protection when using electrical equipment. With RCD plug IP 44 and water-jet protected connector. Function test indicator. Easy to use: simply connect to socket and connect the required appliances. Cut-out time: Residual current: 30 mA. Working temperature: -25 °C bis 40 °C. Design protected. Cable length: 2 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Plug-in system: DE

Temperature loggers TempLog "rugged" by Driesen+Kern GmbH are extremely robust miniaturized data loggers for temperature. The DK310 incorporates an integrated temperaturesensor whereas the DK311 offers an connector socket for an external temperature sensor. Standard probes are reasonably priced air or surface probes, however a variety of other sensors are optionally available. The housing is made of high quality, shock-proof POM protecting the data logger even under rough conditions. The DK311 is protected against splash water according to IP65 - the DK310 complies even with IP68 and is thus fully submersible.

Non-contacting multi-channel stainless-steel speed sensor, eddy current principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Scanning of all electrically conductive materials (steel or aluminium). Insensitive against mechanical abrasion (metal chips). Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed).

Non-contacting multi-channel stainless-steel speed sensor, difference-Hall principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Up to 4 galavanically isolated measurement channels Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed).

Non-contacting multi-channel stainless-steel speed sensor, difference-Hall principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Optionally with current output signal. Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed).

The displacement transducers operate according to the principle of the differential choke, i.e. an inductive half bridge. They consist of two coils which are encapsulated in a stainless steel cylinder ensuring positive protection against vibration, shock, humidity, oil and corrosive matter. A mu-metal plunger core causes opposing changes of inductance when it is displaced through the centre of the coils. The displacement transducers are designed for a carrier frequency of 10 kHz. Other frequencies can be used but may involve changes of output values.

Electrostatically dissipative “ed” floorings for optimum ESD protection of electronic devices and equipment. Protect against electrical shock, resist most oils and greases and are suitable for forklift truck areas. Key Features: Good for very heavy usage Very high footfall sound absorption (10 dB) R9-slip resistance Free of PVC Increased safety thanks to high fire-retardant properties No coatings needed

Electrostatically dissipative “ed” floorings for optimum ESD protection of electronic devices and equipment. Protect against electrical shock, resist most oils and greases and are suitable for forklift truck areas. Key Features: Good for heavy usage High footfall sound absorption (6-8 dB) R9-slip resistance Free of PVC Increased safety thanks to high fire-retardant properties No coatings needed

Electrostatically dissipative “ed” floorings for optimum ESD protection of electronic devices and equipment. Protect against electrical shock, resist most oils and greases and are suitable for forklift truck areas. Key Features: Good for heavy usage High footfall sound absorption (6-8 dB) R10-slip resistance Free of PVC Increased safety thanks to high fire-retardant properties No coatings needed

Electrostatically dissipative “ed” floorings for optimum ESD protection of electronic devices and equipment. Protect against electrical shock, resist most oils and greases and are suitable for forklift truck areas. Key Features: Good for heavy usage High footfall sound absorption (6-7 dB) R9-slip resistance Free of PVC Increased safety thanks to high fire-retardant properties No coatings needed

POWERFUL AND INDIVIDUAL – FOAMplus® BAG PACKER² The FOAMplus® Bag Packer² system produces foam packaging bags at the touch of a button, which adapt specifically to the contours of the packaged goods. Thanks to the proven foam-in-bag system, film bags can be filled with foam automatically through regular batch production or individually, directly at the packing station. When a bag is produced the expanding polyurethane foam pad will quickly mould itself around any product shape in seconds, and affords the highest degree of protection against shock, vibration and compaction. A robust solution for goods in transit and storage that ensures products arrive in perfect condition. Thanks to its low weight, it also reduces transport costs. FOAMplus® Bag Packer² features a user-friendly display screen, where you can adjust the size and fill volume of the bag, program bag sequences, and store defined packaging sizes in the system. The FOAMplus® Bag Packer² is designed to run four film...

Gas-Pro of the company Crowcon is developed for protection in tight, dangerous areas. Gas-Pro offers display up to 5 gases in a compact, robust solution, which Resist tough areas and everyday use! Features of Gas-Pro Measurement up to 5 gases at the same time Clear dispay on top of the device, with two-coloured back lightening Internal pump (optional) Automatic, fail-safe detection of suction adapter Special mode for use before access Three-coloured safety- display Obvious alarm display: vibration alarm, signal tone >95dB and clearly visible red/blue LEDs Integrated, shock-proof casing with protection class IP65 & IP 67 against penetration of water and dust Suitable for use with newest gas test stations, for portable use, wall- or table assembly. Following gases can be measured (max. 5/device): Combustible gases (Ch4; 0-100%LEL) Chlorine (0-5 ppm) Carbon dioxide (0-5 vol.%) Carbon monoxide (0-500 ppm) Ozone (0-1 ppm) Oxygen (5-25 vol.%) Sulphur dioxide (0-10 ppm) Hydrogen...

germanLine® Red 35 Applications: germanLine® Red 35 is particularly resistant to fine-grain, sharp-edged slurries such as wet gravel. It also is extremely resistant to wet wear and round-grain goods. germanLine® Red 35 wear protection rubber is an excellent sound absorber and reduces noise emission. It is mainly used as shock absorber and protection against corrosion and caking in bunkers, skids or slides, pumps, skirts, chutes, silos etc. Available dimensions: Thickness: 3 / 5 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: red Hardness: 35 ± 5 ° Shore A Tensile strength: ≥ 19 MPa Elongation at break: ≥ 650 % Abrasion: ≤ 65 mm³ at 5 N Downloads: Technical Data Sheet germanLine® Red 35 - English [PDF]

germanLine® Beige 35 with CN Layer Applications: germanLine® Beige 35 with CN layer protects surfaces against wet wear and round grain as well as fine-grained, sharp or hard conveyor goods or slurries, such as wet grit. Our product is used in granulation drums, bunkers, skids or slides, pumps, skirts, chutes, silos etc. and serves as wear protection, shock absorber, sound insulation, protection against corrosion and caking. Available dimensions: Thickness: 4 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: beige Density: 1.0 ± 0.03 g/cm³ Hardness: 35 ± 5 ° Shore A Tensile strength: ≥ 19 MPa Elongation at break: ≥ 650 % Abrasion: ≤ 95 mm³ at 5 N Breaking force: ≥ 50 N/mm Downloads: Technical Data Sheet germanLine® Beige 35 with CN Layer - Englisch [PDF]

germanLine® Red 40 with CN Layer Applications: germanLine® Red 40 is suitable for extremely challenging conditions and has excellent wear resistance and sturdiness when it comes to sharp-edged grain. It can be used universally in dry and wet conditions - as pad, shock absorber and protection against caking. Available dimensions: Thickness: 4 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: red Density: 1.08 ± 0.03 g/cm³ Hardness: 40 ± 5 ° Shore A Tensile strength: ≥ 17 MPa Elongation at break: ≥ 650 % Abrasion: ≤ 85 mm³ at 5 N Breaking force: ≥ 60 N/mm Downloads: Technical Data Sheet germanLine® Red 40 with CN Layer - English [PDF]

germanLine® Beige 35 – wear protection rubber with CN layer germanLine® Beige 35 protects surfaces against wet wear and round grain as well as fine-grained, sharp or hard conveyor goods or slurries, such as wet grit. germanLine® Beige 35 wear protection rubber has, on one of its sides, a CN contact layer that ensures super-strong adhesion to steel bases. Our product is used in granulation drums, bunkers, skids or slides, pumps, skirts, chutes, silos etc. and serves as wear protection, shock absorber, sound insulation, protection against corrosion and caking. germanLine® Beige 35 wear protection rubber with CN layer is high in natural rubber and has excellent physical parameters, especially in terms of abrasion resistance. ... more