Testing - Import export

We will help you with your experiment. Whether you need classic personnel support to complete the test crew or need support for specific test tasks: We can help you with: Assumption of certain functions, e.g. test engineer or measurement technician; Assumption of certain tasks, e.g. online monitoring, or daily data validation; Provision of additional measurement technology. Do you still need some resources for your test? We will find the right solution for you: Testbed; Instrumentation; Ancillary systems (e.g. cooling units or heaters); Test Specimen / Test Vehicle; Test Personnel.

There are several steps to be taken for a successful test and for this to work in a targeted and efficient manner, a lot of planning and preparation is necessary. We therefore create the following from your ideas or your order: the data specification, including measurement uncertainty requirement; the test concept; Design of experiments; the specifications for test bench and measurement technology; the specification for the test specimen; Implementation planning.

Milling of complex components for automotive and mechanical engineering. Production of prototypes, test parts, small and large series according to data records, drawings, samples or specifications. Machining of cast and forged blanks. Attachment of decorative surfaces.

Moisture content, loss on ignition – Particle size distribution – open porosity – Water absorption – Bulk density / Grain volume weight – Bulk density DIN 51081:2002-12 - Testing of oxidic raw materials and materials - Determination of mass change during annealing. DIN EN ISO 26845:2008-06 - Chemical analysis of refractory products - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) methods, atomic emission spectrometry with excitation by an inductively coupled plasma (ICP-AES). DIN EN 993-18:2002-11 - Test methods for dense shaped refractory products - Part 18: Determination of apparent density of granular materials by the water displacement method under vacuum.

Step by step: From taking the test sample up to the large-scale regeneration of your catalysts Stept 1: Sample taking Let us know when a sample can be taken from the SCR reactor. We will gladly do this for you. Step 2: Analysis Why is the catalyst no longer active? By an analysis of the catalyst sample we get a general overview about the chemical condition of the catalytyst. Step 3: Diagnosis By evaluation of the chemical analysis we find out the cause of the inactivation and determine the necessary regenerations steps. Step 4: Test Regeneration / Measurement Regenerations are executed under laboratory conditions to determine the ideal regeneration procedure. Activity (k) and SO2/SO3 conversion rate will be measured after this in the bench scale. Guarantees The results of the test regeneration are the basis for the guarantee values, which are part of a regeneration offer.

Learn how to efficiently manage and monitor your measuring and testing equipment. In this training course, you will learn the basics of measuring and test equipment management, the requirements for calibration and documentation. The training is aimed at all those who are responsible for or interested in measuring and testing equipment. Topics of the training course: Measuring and testing equipment management as a pillar of quality assurance; Measuring and test equipment management as part of the quality management system – test equipment officer; Suitability of devices and sensors as measuring and testing equipment; Traceability and calibration; Documentation and employee training; Monitoring and maintenance of the measuring equipment database.

Building an effective measuring and test equipment management system can be challenging, e.g. for companies in the early stages or in need to rebuild their system from scratch. However, good planning and implementation of the set-up are crucial to ensure that measuring and testing equipment works reliably and precisely and thus the quality of your products or services is assured. We support you in implementing an effective system right from the start. We work closely with you to understand your requirements and goals and then develop a bespoke concept tailored to your specific needs. Our experienced team supports you in the selection and procurement of suitable measuring and testing equipment and takes care of the complete documentation of the entire process. We ensure that your system complies with applicable standards and that your employees can use and maintain the system effectively. That ensures reliable and accurate measurements, thus helping to improve your product quality.

We support you in the efficient management and monitoring of your measuring and testing equipment. We offer you a comprehensive analysis of your current processes and identify optimization potential. Together with you, we develop individual solutions to optimize your processes and thus save time and money. Our experienced team is at your side for all questions relating to measuring and test equipment management and supports you in the implementation of the measures. In doing so, we always pay attention to high quality and compliance with all relevant standards.

Learn how to efficiently manage and monitor your measuring and testing equipment. In this training course, you will learn the basics of measuring and test equipment management, the requirements for calibration and documentation. The training is aimed at all those who are responsible for or interested in measuring and testing equipment. Topics of the training course: Measuring and testing equipment management as a pillar of quality assurance; Measuring and test equipment management as part of the quality management system – test equipment officer; Suitability of devices and sensors as measuring and testing equipment; Traceability and calibration; Documentation and employee training; Monitoring and maintenance of the measuring equipment database.

With our software testing service, we help you improve the quality of your software products and identify potential bugs before they become problems for your customers. We work according to internationally recognized standards and thus offer you a high level of quality assurance. Trust in our many years of experience in the field of software development and let us help you take your products to the next level.

You have carried out experimental investigations and are now faced with the challenge of evaluating the quantities of measurement data? We support you in a fast and professional analysis. We offer you: Data management and archiving; Data validation / plausibility checks; Evaluation; Data Analytics; Reporting. Depending on the scope and nature of your test project, we can do this at the end of the test or daily. For repetitive test tasks, we also offer automated solutions. Our team consists of experienced experts who are familiar with a wide range of analytical methods. We'll help you get accurate results and gain detailed insights into your metrics to help you make better decisions. Use our services and save time, money, and resources. We take care of your measurement data so you can focus on what matters most - using the results of your experimental investigations to drive innovation.

The HICPRO is the ultimate portable device for measuring HIC values (Head Injury Criterion). All the measurement and IT technology required to determine the head injury factor is included in the device. The data obtained can be displayed directly on the device or transferred to a PC, tablet or smartphone via WIFI or USB. The device can be easily used to check the safety of floor coverings on playgrounds, in fitness centres or climbing gyms, for example. We can also offer you the systematic and certified testing of your surfaces as a service.

Based on years of experience in the field of test bench metrology in the automotive industry, EP develops test bench solutions for various applications. We build test benches for testing automotive components such as heat exchangers, intercoolers, filters, valves and others. These are test benches on which e.g. supplier parts for the automotive industry are tested in production. Our specialist knowledge of the industry makes us a strong partner in this area.

Apparatus for pressurizing test pieces We offer burst test benches to test load-bearing elements under pressure for their resilience. The components to be tested are put under pressure until they burst. Depending on the requirements (e.g. depending on the medium, pressure range, static or pulsating tests) we build your customized test stand.

We offer you standardised complete systems for the measurement of volume & mass flows. We use measuring elements that have established themselves within previously built customer-specific test benches and convince with high measuring accuracy. We develop and manufacture Venturi tubes and nozzles as individual components or as VMF® complete systems. The VenturiMasterFlow® measuring system, VMF® for short, is used for the precise measurement of air or gas volume and mass flows of 100,000 m³/h. The core of the VMF® system is the FlowProcessor, a PC system with the corresponding data acquisition hardware. Venturi nozzles convince by a low remaining pressure loss and are suitable for flow measurement of gases with high temperatures. The software developed under LabVIEW is operated either via touch screen or with mouse and keyboard.

With the purge air method, heat recovery for balanced air mass flows can be determined for alternating, decentralised ventilation units. The uncertainties of the direct measuring method used so far due to inhomogeneous velocity and temperature profiles at the outlet of the ventilation units are circumvented by the scavenging air method and the measuring accuracy is higher. With the optional humidity conditioning the moisture recovery can also be determined. Further thermal performance indicators are the air volume flow in alternating operation and the balance, which can also be determined with the test bench. The test stand is equipped with an auxiliary fan so that continuously operating ventilation units can also be measured with the direct measuring method.

Test station for foot-activated parking brake

Mouthpieces for Dräger Alcotest 7410 or Envitec AlcoQuant 3020 Mouthpieces made of plastic (individually packed) for correct and hygienic use of Dräger Alcotest 7410 or Envitec AlcoQuant 3020.

Mouthpieces made of plastic (individually packed) for correct and hygienic use of Dräger Alcotest 6510

Two modern AOI devices (automatic optical inspection) in 2D and 3D secure the manufacturing process during the SMT assembly. We use our X-ray inspection device to control the soldering process on components with connections under the housing. In addition to quality assurance, we also offer test and inspection procedures that are precisely tailored to your needs. In addition to circuit-specific in-circuit and burn-in tests, we can carry out application-related function tests in our test field. For specific tests, many customers send us the test procedures with the appropriate equipment directly. In this way we can check the functionality of your assembly without you having to tell us what exactly the tests are checking. Your advantages with A + B Electronic -Test procedures tailored to your needs -We are not just a service provider, we are a technology partner: A + B Electronic thinks your project with you and together we can successfully bring it into series production

The LactoFAN 2 is a powerful diagnostic tool for measuring expired Hydrogen concentrations in ppm, for example the Lactose intolerance test. From a single breath manoeuvre, measurements are instantly displayed on the large, easy to read touch screen display. View product video Details The LactoFAN 2 is a powerful diagnostic tool for measuring expired Hydrogen concentrations. From a single breath manoeuvre, measurements are instantly displayed on the large, easy to read liquid crystal display. Main applications of the LactoFAN are the Lactose intolerance test and the easy indication of intestinal lactose malabsorption by monitoring the exhaled H 2 after ingestion of lactose. Fields of application Lactose intolerance and malabsorption Carbohydrate malabsorption and breakdown deficiencies Sucrose and Fructose malabsorption small intestine bacterial overgrowth intestinal transit time Special features easy operation by the glove-capable touchscreen graphical user guidance and patient animation result tables for several patient continuously updated result history no warm-up time automatic reset, sensor drift detection semi-automatic calibration method operation from 4 standard AA–size rechargeable batteries supplied with starter kit in a sturdy carry case Software The LactoFAN 2 is supplied with a simple data export software that you can use at every PC with the included mini–USB cable. Using the optional available FANh2 Windows® software via the supplied interface cable you can transfer measurement data from the H 2 monitor into test reports. You can select a commonly used H 2 breath test protocol like Lactose intolerance, Intestinal transit time or Bacterial overgrowth from the database and enter the patient’s details along with their symptoms. The software can manages multi-patient H2 sessions stored in the LactoFAN 2 and diagnoses the results. FANh2 will complete the test process by editing a professional report. As well as the many built-in protocols, the software will accept customized protocols entered by the user. In addition you are enabled to continue using your patients’ database coming from breath tests already performed. More than this, you can use the integrated test protocol database and take advantage from the convenient diagnosis and report facilities. Via standard data interfaces like GDT, HL7 or ASTM the software can be connected to practise or hospital EDP–systems easily.