Complete assembly - Import export

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Custom machine for complete assembly of keys for locking systems

Fully automatic assembly system for complete assembly of joints Automatic change-over between part types is handled by robotic solutions.

The clamping strength can be adjusted easily and quickly via the stable detent . The clamp is delivered completely pre-assembled.

The classic end clamp for modules with a frame height of 35 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 35 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 50 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

With the Alumero end clamp 2.1 Click you have the universal end clamp for all modules with a frame height of 33 – 50 mm. The clamping strength can be adjusted easily and quickly via the stable detent. The clamp is delivered completely pre-assembled.

With this completely pre-assembled connection terminal for 8-10 mm thick aluminum round wire, the required equipotential bonding can be implemented quickly and easily. The clamp is fastened in the upper or lower rail groove with a flick of the wrist.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

HELLER uniPro 90 Machine tools manufactured by HELLER are used around the world in the machining sector. Many of the older processing centres are using the "uniPro 90" controller for which we offer completely reconditioning repairs across the entire product range. In addition we are selling new, replacement and exchange parts. We are also able to test these HELLER controllers on our internally developed test stand and guarantee full functionality following repair. By using original components for every repair, we can also offer you an 24month warranty* on the complete assembly. The product portfolio for the HELLER uniPro 90 product range currently consists of inputs and outputs, plugin cards from the ACPU90 range, control panels, system cards and power modules.

SCHOCK is the specialist in the production of cold-rolled profiles according to individual customer requirements. With a wide range of different technologies, we manufacture special profiles as customized functional elements up to complete assemblies.

SCHOCK is your specialist in the production of cold-rolled profiles tailored to individual customer requirements. With a wide range of different technologies, we manufacture special profiles as customized functional elements up to complete assemblies. SCHOCK's roll forming technology operates economically and material-efficiently, offering significant advantages in product design: Unlimited range of shapes Highly precise functional dimensions Economical material utilization Energy-efficient manufacturing process SCHOCK special profiles are characterized by the highest precision and top-notch workmanship. With SCHOCK's roll forming technology, we produce profiles with extremely tight tolerances and excellent product properties. Thanks to creative tool solutions, we manufacture virtually burr-free profiles and process different materials with a tensile strength of up to 1000 MPa.

SCHOCK offers complete metal assembly systems with integrated functional components such as soft-close mechanisms, adjustment mechanisms, and mounting systems. The SCHOCK High Cabinet Full Extension, measuring 600mm in length and designed for installation in wooden cabinets with a load capacity of up to 120 kg, is available as a ready-to-install assembly: Full extension, length 600 mm Load capacity of up to 120 kg Guided both at the bottom and top Mounting brackets with front adjustment Soft-closing self-retraction with a 50 mm movement in the lower and upper guides Set packaging – pre-assembled and includes installation instructions We are also happy to manufacture other assemblies upon request according to your specifications. Length: 600 mm Load capacity: up to 120 kg Comfort features: Soft-closing self-retraction

If you want to have a device completely assembled, you've come to the right place. It does not matter whether you only need a small number of items or series production. We derive the processes and assembly instructions from a first joint workshop. In this way we can procure the important components, assemble the device and then test it. Your product will be assembled according to your requirements. On request, we can assemble under clean room conditions, assemble only individual components or prepare the device for final assembly on your premises. When assembling devices, we can work with methods such as press-fit technology or, for example, secure components by gluing. Your advantages with A + B Electronic -Device assembly according to your requirements -We are not just a service provider, but a technology partner: A + B Electronic thinks your project with you and together we can bring it to series production successfully