Securing clamps - Import export

• The wire cloth shield has the dimensions 200x135mm and a window opening • Lenses with Ø of 50mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail

• The mesh visor is made of galvanized wire cloth • It shields the face against radiant heat • The mesh visor has a window opening for lenses with the dimensions 60 x 120 mm • Among others, blue inspection glasses, green welding glasses, or clear glasses can be utilized in the window opening • The lenses are securely clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare

• The wire cloth shield has the dimensions 200x135mm and 2 windows with Ø 50mm • Lenses with Ø of 50mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail

• The wire cloth shield has the dimensions 300x180mm and a window opening • Lenses with the dimensions 60x120mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

• The mesh visor is made of galvanized wire cloth • From the outside the mesh visor is covered with aluminised fabric • It shields the face against radiant heat • The mesh visor has a window opening for lenses with the dimensions 60 x 120mm • Among others, blue inspection glasses, green welding glasses, or clear glasses can be utilized in the window opening • The lenses are securely clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare

• The mesh visor is made of galvanized wire cloth • From the outside the mesh visor is covered with aluminised fabric • It shields the face against radiant heat • The mesh visor has a window opening for lenses with the dimensions 60 x 120mm • Among others, blue inspection glasses, green welding glasses, or clear glasses can be utilized in the window opening • The lenses are securely clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare

The K2 universal module middle clamp OneMid is a practical and simple component for the K2 system. It is suitable for module frames with a height of 30 – 42 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamps are compatible with the K2 systems Single Rail, Cross Rail*, Speed ​​Rail, Multi Rail and Solid Rail.*

In contrast to DVK-6 quick closure pipe couplings, DVK-6 Fix pipe couplings only the upper area of the slit coupling is closed with a clamping lever. The clamping lever can be locked in any desired position by a simple upward pull. A high clamping force develops due to optimal length of lever. double secured massive aluminium clamps very easy to mount due to circular version white EPDM gasket (temperature-resistant from -30°C to +120°C), food-safe black natural rubber gasket (-20°C to +60°C)

DVK 6 pipe couplings with quick closure accelerate mounting in suction conveying with constant safety. The clamping lever can be locked in any desired position by a simple upward pull. A high clamping force develops due to optimal length of lever Additionally DVK-6 pipe couplings with quick closure offer the following characteristics: double secured massive aluminium clamps screws M 8 with massive threaded bars very easy to mount due to circular version black natural rubber gasket (-20°C to +60°C) white EPDM gasket (temperature-resistant from -30°C to +120°C), food-safe optionally available with silicone gasket (temperature-resistant from -60°C to +200°C)

DVK 6 pipe couplings are designed for a quick and safe use in suction conveying. massive aluminium clamps (double secured) screws M 8 with massive threaded bars very easy to mount due to circular version black natural rubber gasket temperature-resistant from -20°C to +60°C) white temperature-resistant EPDM gasket (-30°C to +120°C), food-safe optionally available with silicone gasket (-60°C to +200°C)

Also DVK-HD® pipe couplings with traction relief are ideal for a quick and safe use for pressure conveying. Their characteristics are equal to DVK-HD® pipe couplings: double secured massive aluminium clamps screws M12 with massive threaded bars very easy to mount due to circular version, nitrile gasket is temperature-resistant from -20°C to +80°C and safe for use with food optionally available with silicone gasket (-60°C up to +200°C) Additionally pipe couplings of type DVK-HD® with traction relief have the following product specifications: monobloc pipe coupling with traction relief with bridge part to safeguard against axial forces material: couplings in aluminium, clamps in galvanized steel pipe clamps and traction bars traction-resistant

DVK-HD® high pressure pipe couplings are perfect for a quick and well-priced mounting for pressure conveyors. They have the following characteristics: for outer pipe diameter from 60.3 to 206.0 mm length: 100, 150, 200 mm or longer metal casing made of aluminium AlMgSi 0.5 F22 massive aluminium clamps (double secured) screws M12 with massive threaded bars pressure-resistant up to maximum of 12 bar (see table) vacuum-resistant up to maximum of 0.8 bar (see table) circular version, therefore very easy to mount white EPDM gasket or nitrile gasket, temperature-resistant and food-safe optionally available with silicone gasket (-60°C to +200°C) Mounting these pipe couplings is safe and hazard-free because no welding works are necessary. They also can easily be dismantled – connecting pieces and pipes can be reused.

• For securely holding, clamping and tensioning round, profile and/or flat material • Field of application: round and flat materials • With wire cutter • High clamping pressure due to toggle lever transmission • With quick-release and adjusting screw • Usable with one hand • Black powder coated • Pliers body made of extremely high tensile spring steel • Jaws made of chrome-vanadium steel, forged

FXL magnetic chucks with pole type 70 are used to securely clamp workpieces from approx. 150x150mm with material thickness from approx. 15mm. Poles of size 70x70mm generate a magnetic field that penetrates approx. 18mm into the workpiece, which is why they are particularly suitable for larger workpieces. Very good air gap behavior also allows uneven workpieces to be clamped securely. In addition, pole extensions with a larger stroke can be used on 70 poles for height compensation. The nominal holding force is a super strong 160 N/cm2 = 7.8kN per pole.

Scope of application: -Horizontal installation -Suitable for conventional clamping and for gripper clamping or a combination of both -The support jaws enable a wide range of unmachined parts from flame-cut and sawn materials through to complex castings to be clamped securely and economically. Suitable for materials Product features: -Clamping range adjustment for clamping two workpieces of different sizes -Reproducible clamping forces enable excellent repeating accuracy of the workpiece position -Mechanical power-transfer device -Fully enclosed and maintenance-free high-pressure spindle – high chip protection, minimum cleaning requirements, constant clamping forces up to 40 kN -Use with a torque wrench – max. 40 Nm

Scope of application: -Can be applied horizontally or vertically – therefore suitable for vertical and horizontal CNC milling machines -Conventional clamping, gripper clamping or pull-down clamping are all possible -Clamping unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece -With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically. Product features: -High versatility – the modular clamping system combines practically all the possibilities of our tried-and-tested models -The TITAN 2 M is ground an polisched on all sides -High-pressure spindle with power intensification -Enlarged clamping span for secure clamping of unmachined parts -Lost clamping margin 8 mm with pull-down, 3 mm with GRIPPER -Clamping near to neutral axes -Clamping jaws of forerunner are compatible

Scope of application: -Can be applied horizontally or vertically – therefore suitable for vertical and horizontal CNC milling machines -Conventional clamping, gripper clamping or pull-down clamping are all possible -TITAN 2 K – ideal for use on five-axis machining centres -Clamping unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece -With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically. Product features: -High versatility – the modular clamping system combines practically all the possibilities of our tried-and-tested models -High-pressure spindle with power intensification. Clamping force does not slacken -Enlarged clamping span for secure clamping of unmachined parts -Lost clamping margin 8 mm with pull-down, 3 mm with GRIPPER -Clamping near to neutral axes -Clamping jaws of forerunner are compatible

Scope of application: -Can be applied horizontally or vertically – therefore suitable for vertical and horizontal CNC milling machines -Conventional clamping, gripper clamping or pull-down clamping are all possible -Clamping unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece -With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically. Product features: -High versatility – the modular clamping system combines practically all the possibilities of our tried-and-tested model -High-pressure spindle with power intensification. -Enlarged clamping span for secure clamping of unmachined parts -Lost clamping margin 8 mm with pull-down, 3 mm with GRIPPER -Clamping near to neutral axes -Clamping jaws of forerunner are compatible -Clamping range of the middle fixed jaw groove: Max clamping width -176 mm

Scope of application: -For horizontal & vertical usage-suitable for CNC controlled milling machines & large machining centres -Clamping unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece -With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely -Gripper studs suitable for materials with a strength of up toapprox. 1000N/mm² Product features: -High versatility – the modular clamping system combines practically all the possibilities of our tried-and-tested models -Fully compatible with the accessories of the LC/TC 160 series, for example gripper studs, universal gripper set & pull down sets -Grounded sides so that all sides can be used High-pressure spindle with mech. force amplifier for the safe clamping of raw parts in combination with gripping & pull down spring function -Lost clamping margin 8 mm with pull-down, 3 mm with GRIPPER

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -For automation of machining centres – particularly suitable for batch production -The hydraulic spindle also enables the use of support jaws with which a wide range of unmachined parts, from flame-cut and sawn materials through to complex castings, can be clamped securely and economically. Suitable for materials with a strength of up to approx. 1000 N/mm². Product features: -Extreme accuracy for your machining -The clamping force is generated via the pressure from a hydraulic unit with a hydraulic clamping stroke of up to 4.5 mm -The clamping force is steplessly adjusted by regulating the hydraulic pressure on the hydraulic unit. A hand crank is provided for coarse adjustment of the clamping range -The spindle contains a single-acting hydraulic piston and an additional Belleville spring assembly

Manufactured for use with our 200, 210 & 202 series hose ranges, the 936 hose finishers are designed for push fit applications. The internal gear drive clamp ensures a secure leak free connection; easily assembled using basic hand tools.

Technical information Axial grooving is among the most technically difficult machining process in the whole field of metal removal. In this process the chip, once removed, must overcome not just the shaping of the material but also the circular movement. It is particularly important that the machining should always commence at the outer diameter of the axial groove as tool stability is in direct proportion to the diameter. It is preferable for the tool to be used underneath the work-piece so that the chips can fall downwards without obstruction. Tool systems The S System is a modular tool system which offers innumerable possibilities to the user. The cutting tips for this system are ground to a sharp edge and produce an excellent surface quality. It goes without saying that the cutting tips can be supplied with all required corner radii. The RC System is screw clamped; the cutting tip is securely clamped into position so that it cannot fall out. When rough turning, grooving depths of up to 100 mm are standard. When turning larger diameters we are also able to achieve grooving depths of 150 mm.

The electropermanent load lifting magnets from the EMPH series are suitable for the lifting and transportation of individual slabs and unprocessed blocks. These magnets are used to handle loads with a large air gap or with scaled surface. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the EPMH from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. Through the impulse current control, the EPMH load lifting magnets do not use much energy. The effectiveness and efficiency can be seen on the one hand in the reduction of operating costs and on the other hand in a saving of time.

The EPMB electropermanent battery lifting magnets are considered the best load lifting magnet development in the past decades at ASSFALG. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the EPMB from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. The electropermanent battery lifting magnet EPMB can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 6 mm. All technical data can be found in the .pdf file.

The electropermanent load lifting magnet traverses TBK4 and TBK6 with automatic telescopic arm allow the lifting and transportation of sheets in different sizes from 3m to 16m. The patented solid steel modules are more heat-resistant than comparable modules made with a plastic casting mass. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the magnet traverses from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 5 mm. Magnet modules that are not needed can be switched off with the multi-channel control. This means a large magnet traverse system can be securely used for the transportation of smaller sheets.

The EPM M electropermanent load lifting magnets are used where there is a frequent change of workpieces due to the very short switching times. Only a 230V rated current, depending on magnet with 230V or 400V, must be provided to use these devices and they are then immediately ready for use. Through electrical impulses within seconds, the EPMM from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. The electropermanent battery lifting magnet EPMM can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 4 mm.