Seals- mechanical- for pumps - Import export

The universal Drum pump with mechanical seal F/FP 430 can be used for various media and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on plastic models (PP and PVDF). This always allows full function of the mechanical seal. This way, leakage and unnecessary wear are prevented for the complete operating temperature range. Furthermore, it provides highest stability and makes immersion lengths of up to 3 000 mm possible. The versions in stainless steel and hastelloy C are ex-protected. The stainless steel version is also available as FOOD certified version.

Pre-assembled pump set for pumping concentrated acids from 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, outer tube in polyvinylidene fluoride and commutator motor F 458, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be fast and without tools disassembled into two parts - Steel core in the inner tube prevents longitudinal changes at high and low temperatures - Robust motor with aluminium housing and special corrosion-resistant painting - Motor is completely closed Benefits: - No medium gets into the inner tube of the pump - No carrying-over of the medium - one pump can be used for different media - Pump can be quickly and easily cleaned - No corrosion on motor due to aggressive vapours

Pre-assembled pump kit to pump different media out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube in stainless steel, hose, hand nozzle and compression gland. Driven either by commutator motor F 460 or compressed-air motor F 416. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools into two parts Benefits: - Easy disassembly - Universally and flexibly applicable - Easy to clean as no medium can get into the inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube material aluminium, optionally with commutator motor FEM 4070 (500 Watt) or commutator motor F 457 (800 Watt) available; furthermore are enclosed: hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart into two parts without tools Benefits: - Easy disassembly - Universally and flexibly applicable - Easy to clean as no medium can get into to inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled pump kit for food and pharma in ex-version. The pump-kit is ideal for frequent medium changes and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Comprising drum pump FP 430 Ex FOOD, outer tube stainless steel, commutator F 460 Ex, hose, hand nozzle, hose connection, compression gland and earth cable. Product attributes: - With mechanical seal for sealing the inner tube - Pump can be disassembled into two parts: inner tube cpl. and outer tube - Grease-lubricated shaft bearing Benefits: - Ideal for frequent medium changes, hardening media, fast drying media, crystallizing media - Can be taken apart into main components easily and quickly for cleaning - Compared to sealless pump higher service life on abrasive media - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21

Pre-assembled pump kit to pump acids of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, material outer tube polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools - Inner tube with steel core - prevents longitudinal changes at high or low temperatures Benefits: - Easy disassembly - Universally and flexibly applicaple - Easy to clean as no medium can get into to inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with double mechanical seal. This pump series is designed for horizontal installations next to a tank and are capable of cutting aluminium chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction. The specially made cutting unit (>60 HRC) is cuting chips and the above located semi-open impeller allows with its large clearances to pump the particles along with the coolant fluid from the machine back to the filter. The SBC pumps are capable of handling chip to coolant ratios of up to 1.5% by weight. Volumetric delivery: up to 1400 l/min Delivery head: up to 34 m

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are self-priming after initial filling. All pumps are equipped with a single mechanical seal. SBM Pumps are mounted next to or on top of the tank and they are suitable for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. Volumetric delivery: up to 440 l/min Delivery head: up to 20 m Please contact us for delivery quantity.

Vertical End Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with double mechanical seal. This pump series is designed for vertical installations next to a tank and for pumping highly air entrained coolant and cutting oils, as they occur in high speed grinding applications. The SBG pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G ¼. Volumetric delivery: up to 2250 l/min Delivery head: up to 62 m Please contact us for delivery quantity

The U-Do Pump Series is a universally applicable all-rounder. The design and manufacturing materials allow for optimized adaptability for the many different operating conditions as well as for the various media to be pumped. Materials: PVDF (polyvinylidene fluoride) max. output rate: 500 l/min max. discharge head: 40 m motor power: 0.18 - 5.5 kW Advantages: » available with single- or double mechanical seal » applicable also for media to be pumped that do not have any lubricating properties (e.g. varnishes and paints) » the highest chemical resistance » robust, thick-walled design » long-lasting and wear resistant, various types of designs for almost all operating conditions » open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible) » easy to maintain (wear parts and the mechanical seal can be changed swiftly) » universally applicable, quiet and compact » various chemical resistant materials can be supplied as stock items

The UP Pump Series is designed for all sorts of applications and is perfectly suitable for the transmitting operation in stainless steel plants as well as for severe temperature stress. Material : Stailess steel 1.4581 Max. output rate: 460 l/min Max. discharge head: 39 m Motor power: 0.18 - 5.5 kW Advantages: » available with single- and double mechanical seal » the highest chemical resistance also at high temperatures up to +150° C » robust, thick-walled design, solid stainless steel fine cast (no thin-wall-deepdrawing sheet metal) » low-maintenance through an optimal adaptation to the medium to be pumped » long-lasting and wear resistant, various types of designs for almost all operating conditions » open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible) » easy to maintain (wear parts and the mechanical seal can be changed swifly) » universally applicable, quiet and compact » also available for combustible environments, explosion proof

without shaft seal streamlined housing made of PP or ETFE volume flow of up to 230 l/min delivery head of up to 29 m.WG back pull-out

without shaft seal Robust and casted casing CARTRIDGE UNIT for fast and easy maintenance Temperature up to 120°C (higher temperatures are possible) Close coupled, single stage, back-pullout-design Universal DIN/ANSI connection Suction port DN40 Discharge port DN25