Results for
GMN PAUL MÜLLER INDUSTRIE GMBH & CO. KG
Germany
Based on decades of experience, GMN has specialized in producing extremely high quality machine tool components. Through this strategy, GMN manufactures a wide range of standard non-contact seals and customized solutions. The frictionless, no-wear characteristics of GMN non-contact seals offer effective, economical and ecological solutions for modern applications in and outside of the machine tool industry. Thanks to the non-contact design of the inner and outer ring, GMN labyrinth seals guarantee completely frictionless operation and therefore offer a wide range of benefits for a whole host of applications and uses.
Request for a quoteBÜRKLE GMBH
Germany
Retention samples are kept to provide a sample for comparison at a later date. The unambiguous proof that the retention sample is identical to the original sample is only possible with clearly marked and sealed containers. However, sealing is frequently not possible unless eyelets are present. seal-it provides the solution! The seal-it self-adhesive label sticks to all conventional containers. Thanks to its unbelievable adhesive power it cannot be removed. If a container opening is closed with seal-it, then the container cannot be opened without destroying the seal-it label. seal-it is additionally provided with several cross-perforations which immediately tear when manipulated like a motorcar tax disc.
Request for a quoteLACERS GMBH
Germany
Impulse sealing device Eco-Sealer-200 Film sealing devices / impulse sealing devices of the Eco-Sealer series: The ECO-Sealer series is a very economical solution for sealing / sealing smaller runs. They are also suitable as an entry point for manually sealing your packaging. Our ECO sealers are ideal for sealing / sealing PE (polyethylene) and PP (polypropylene) films. They do not require any warm-up time, they are ready to use immediately after activation. In addition, they have an adjustable timer with indicator light, which helps you to create the optimal weld seam / sealed seam for your film. At a glance: impulse welder suitable for welding PE and PP foils Version with time switch different weld lengths possible Spare parts/accessories available suitable for welding max. 2 x 150µ Weld length: 200 mm - Weld width: 2 mm
Request for a quoteW. KÖPP GMBH & CO. KG
Germany
We seal your housings, control cabinets or lighting units, apply adhesives or cast electronic components. In addition to the proven, high-performance 2-component PUR seals (FIPFG), we cover other important areas of application for our customers by applying homogeneous 1-component seals. For example, if your application requires higher temperature and/or chemical resistance or may be less compressible than a foamed seal. Our one-component, elastic solutions are also used for electrically conductive seals. We dose silicones, polyurethanes or MS polymers in liquid, unreacted form directly onto your component. True to contour on the smallest geometries, extremely adhesive and durable. Perfect sealing – sealing, gluing, casting directly on the component. Absolutely true to the contour and directly onto your component. We enable our customers to do this in series thanks to state-of-the-art dosing systems.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand. Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » Other fastening options (e.g. external, internal threads and threads measured in inches) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised lengths up to 2000 mm
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » Other fastening options (e.g. external, internal threads and threads measured in inches) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised lengths up to 2000 mm
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand. Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » Other fastening options (e.g. external, internal threads and threads measured in inches) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised lengths up to 2000 mm
Request for a quoteW. KÖPP GMBH & CO. KG
Germany
We seal your housings, control cabinets or lighting units, apply adhesives or cast electronic components. In addition to the proven, high-performance 2-component PUR seals (FIPFG), we cover other important areas of application for our customers by applying homogeneous 1-component seals. For example, if your application requires higher temperature and/or chemical resistance or may be less compressible than a foamed seal. Our one-component, elastic solutions are also used for electrically conductive seals. We dose silicones, polyurethanes or MS polymers in liquid, unreacted form directly onto your component. True to contour on the smallest geometries, extremely adhesive and durable. Perfect sealing – sealing, gluing, casting directly on the component. Absolutely true to the contour and directly onto your component. We enable our customers to do this in series thanks to state-of-the-art dosing systems.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
PDR - Side-entry agitator Side-entry agitator for mixing below liquid surface. The PDR is a simple side-entry-agitator for mixing below the liquid surface. The PDR is recommended for applications where low viscous liquids are mixed turbulently in high tanks and where a top-entry mixer would be too heavy due to its shaft length and –diameter. The sealing between the agitator and the vessel is done by means of a single-acting, internal mechanical seal which is lubricated by the mixing product or an additional fluid The agitator shaft is connected to the drive directly with a flange coupling inside the seal housing. By default, this agitator series is supplied with marine type propellers. Other mixing elements according to the mixing task upon request. Solutions correspond to those of the SPR, additionally mechanical seal in sealing housing. Other solutions for this series upon request.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
Side-entry agitator for mixing below liquid surface. The PDR is a simple side-entry-agitator for mixing below the liquid surface. The PDR is recommended for applications where low viscous liquids are mixed turbulently in high tanks and where a top-entry mixer would be too heavy due to its shaft length and –diameter. The sealing between the agitator and the vessel is done by means of a single-acting, internal mechanical seal which is lubricated by the mixing product or an additional fluid The agitator shaft is connected to the drive directly with a flange coupling inside the seal housing. By default, this agitator series is supplied with marine type propellers. Other mixing elements according to the mixing task upon request. Solutions correspond to those of the SPR, additionally mechanical seal in sealing housing. Other solutions for this series upon request.
Request for a quoteKNÜPPEL VERPACKUNG GMBH & CO. KG
Germany
Environmentally friendly single-material solution for secure sealing of paper and corrugated board packaging.
Request for a quoteHERRMANN ULTRASCHALLTECHNIK GMBH & CO. KG
Germany
The weld tools safely seal the foil even with fine coffee residues present within the sealing zone. This complete solution consists of an ultrasonic generator, stack, guiding rail, force build-up and drive system. The compact, modular design allows for implementation of multi-lane, space-optimized solutions. In this concept it is possible to separately adjust parallel feed and sealing force for each lane. As a result optimum sealing results can be achieved.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
Bonded seals are a cost-effective solution for bolt/thread sealing. They offer reliable high and low pressure sealing capability and are able to perform in a wide range temperatures. The seal itself is made up of a disc consisting of a metallic ring and a rubber sealing pad bonded together.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HILGENBERG GMBH
Germany
Cloning cylinders or rings are ideally suited for separate cloning if individual cells or cell groups on a nutrient solution. A specific cell or cell group is separated from the other cells in the nutrient solution by simply placing the cloning ring over it. The rings are made of high-grade borosilicate glass, and can be thermally sterilized without problems. The ring faces are ground perfectly flat, enabling the rings to be fixed e.g. to the floor of a Petri dish by means of a suitable grease. Subsequently, the nutrient solution is filled into the ring. The grease provides a seal between the ring and the Petri dish, whereby the precision-ground flat end ensures that very little grease is required to provide an optimum seal. The same applies in the case of Petri dishes prepared with a nutrient solution – here, the seal is provided simply by pressing the ring into the solution and down to the floor of the dish. Cloning cylinders
Request for a quoteNORA SYSTEMS GMBH
Germany
Individual requirements for stairwells are best fulfilled from our extensive system programme, from the tailored norament® stairtread with integrated preformed stair nosing, riser, and tread to individual combinations of stair angles, stair nosings, and integrated safety stripes. Our system range is rounded off with colour-matched skirting solutions, joint-sealing compounds, hot welding rods, and installation materials.
Request for a quoteNORA SYSTEMS GMBH
Germany
Individual requirements for stairwells are best fulfilled from our extensive system programme, from the tailored norament® stairtread with integrated preformed stair nosing, riser, and tread to individual combinations of stair angles, stair nosings, and integrated safety stripes. Our system range is rounded off with colour-matched skirting solutions, joint-sealing compounds, hot welding rods, and installation materials.
Request for a quoteNORA SYSTEMS GMBH
Germany
Individual requirements for stairwells are best fulfilled from our extensive system programme, from the tailored norament® stairtread with integrated preformed stair nosing, riser, and tread to individual combinations of stair angles, stair nosings, and integrated safety stripes. Our system range is rounded off with colour-matched skirting solutions, joint-sealing compounds, hot welding rods, and installation materials.
Request for a quoteHEXPOL TPE GMBH
Germany
Sealing compounds for crown corks The EPSeal 100 series is designed for crown corks and can be used for carbonated beverages including lemonades, beer, mineral water, juices and milk based drinks. Different versions accommodate all the beverage processing systems including sterilisation. Additional versions address steel down-gauging as well as twist off crown applications. Our laser marking versions support beverage promotion strategies. Oil free grades are also available. Tested by Nehring and VLB Berlin Odour and taste of a mineral water stored in a light box and sealed with a crown cork lined with EPSeal 100 had no taste or odour deviation. The crown corks lined with EPSeal 100 were classified as Type A according to the STLB. Download EPSeal Product Guide
Request for a quoteDR. JOHANNES HEIDENHAIN GMBH
Germany
The angle encoders without integral bearing (modular angle encoders) are intended for integration in machine elements or apparatuses. They are suited for the following requirements: — Large hollow shaft diameter (up to 10 m with a scale tape) — High shaft speeds up to 20000 rpm — No additional starting torque from shaft seals — Segment solutions Field of application: High-resolution rotary axes with high reproducibility — Very high number of signal periods — Small mounting space — Small interpolation error and low signal noise
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
In ThreadLoc® ARNOLD UMFORMTECHNIK has created a full product range to meet every screw fastening need. Users are able to find the right fastening, damping or sealing solution to suit their particular applications, and thus ensure constantly successful fastenings. The ThreadLoc® product range picks up on the differentiation between market-based mechanical and chemical screw locks, and recommends the correct locking solution for each application, including damping and sealing properties.
Request for a quoteGESUNDFÜRUNS
Germany
The TÜV-certified CLUNGSE COVID-19 antigen test is a rapid test for the qualitative detection of nucleocapsid protein antigens in nasal or nasopharyngeal swabs. The SARS-CoV-2 test listed by the BfArM may be carried out either by medical professionals or by appropriately trained professionals. The 3in1 antigen test is characterized by new batches that recognize Omikron with high specificity and are optimized for professional use. The tests are prefilled, the buffer solution bottle is sealed for error-free handling and the sample can be taken via the following swabs: nasal, oropharyngeal and nasopharyngeal. Thanks to the high sensitivity and specificity, the test result is particularly reliable. The test can already be read after 10 - 15 minutes. • 3in1 antigen test according to the Federal Institute for Drugs and Medical Devices approval AT079/20 • Format - Immunoassay • Sampling Nasopharyngeal swab and/or nasal • Packaging 25 tests per case
Request for a quoteResults for
Sealing solutions - Import exportNumber of results
26 ProductsCountries
Category